journal article·2023-04Open access

Effect of cold and hot compactions on corrosion behavior of p- and n-type bismuth telluride-based alloys developed through microwave sintering process

Aicha S. Lemine, Osama Fayyaz, R.A. Shakoor, Zubair Ahmad, Jolly Bhadra, Noora J. Al-Thani

Abstract

Bismuth Telluride (BiTe) based p-type and n-type alloys exhibit superior thermoelectric (TE) performance covering energy requirements for specialized and home utilization. The main challenge nowadays is the sustainability of their adequate TE performance in corrosive environments, which might activate the corrosion reactions, leading to the degradation of p/n semiconductors, and then failure of the TE device. This study investigates the electrochemical responses of cold and hot compacted, microwave-sintered p- and n-type BiTe alloys in a saline medium (3.5 wt% NaCl solution). XRD analysis of microwave-sintered cold- and hot-compacted BiTe pellets confirmed their phase purity and uniform crystal structure. Potentiodynamic polarization (PDP) and Electrochemical Impedance Spectroscopy (EIS) data showed enhancements in the corrosion behavior of hot-compacted p-type and cold-compacted n-type BiTe pellets. The study also proposes a corrosion resistance mechanism with an equivalent electrical circuit (EEC) to fit the experimental EIS data of both BiTe pellets. FE-SEM analysis showed visible microstructural evolutions of the BiTe pellets and their passive films. It revealed a remarkable improvement in the microstructure and blocking effect caused by the formed passive films coating the surfaces of the pellets and acting as a physical barrier preventing the passing of destructive Cl- ions. EDX spectra have proved the presence of p-type and n-type BiTe alloys, each with the corresponding dopant element of Antimony (Sb) or Selenium (Se), respectively, and in the same weight compositions for either hot or cold compacted pellets. AFM analysis examined the surface topography of developed pellets. It showed an increment in the surface roughness-mean-square (RMS) values with the development of passive films on p- and n-type BiTe alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Thermoelectric performance enhancement in BiSbTe alloy by microstructure modulation via cyclic spark plasma sintering with liquid phase10.1002/adfm.202009681 ↗
2. R.S. Kondaguli, P.V. Malaji, Analysis of Bismuth Telluride (Bi2Te3) Thermoelectric Generator, Proc. B-HTC 2020 - 1st IEEE Bangalore Humanit. Technol. Conf., 2020. 〈https://doi.org/10.1109/B-HTC50970.2020.9297843〉.10.1109/B-HTC50970.2020.9297843 ↗
3. Experimental and modeling analysis of p-type Bi0.4Sb1.6Te3 and graphene nanocomposites10.1016/j.jmrt.2021.12.096 ↗
4. Enhanced thermoelectric performance and mechanical strength of n-type BiTeSe materials produced via a composite strategy10.1016/j.cej.2021.131205 ↗
5. Nanostructuring and creation of nanocomposites as a promising way to increase thermoelectric efficiency10.1134/S1995078019040098 ↗
6. A review of thermoelectrics research - recent developments and potentials for sustainable and renewable energy applications10.1016/j.rser.2013.12.053 ↗
7. Promising transparent and flexible thermoelectric modules based on p-type CuI thin films—a review10.1016/j.egyr.2022.09.020 ↗
8. Corrosion behavior of Bi2Te3-based thermoelectric materials fabricated by melting method10.1007/s11664-016-5113-1 ↗
9. Understanding oxidation resistance of half-heusler alloys for in-air high temperature sustainable thermoelectric generators10.1021/acsami.0c08413 ↗
10. Corrosion behavior in volcanic soils: in search of candidate materials for thermoelectric devices10.3390/ma14247657 ↗
11. Wafer-level vacuum sealing and encapsulation for fabrication of CMOS MEMS thermoelectric power generators
12. Effects of polymeric coatings on the service life of bismuth telluride-based thermoelectric materials10.1039/C7SE00136C ↗
13. Bismuth telluride-based thermoelectric materials: coatings as protection against thermal cycling effects10.1557/jmr.2012.335 ↗
14. Ultra-fast fabrication of Bi2Te3 based thermoelectric materials by flash-sintering at room temperature combining with spark plasma sintering
15. Study of materials produced by powder metallurgy using classical and modern additive laser technology10.1016/j.proeng.2015.01.488 ↗
16. Advanced powder metallurgy technologies10.3390/ma13071742 ↗
17. An overview of hot isostatic pressing10.1016/0924-0136(92)90038-T ↗
18. Microwave activated hot pressing: a new consolidation technique and its application to fine crystal bismuth telluride based compounds10.1016/j.powtec.2014.07.022 ↗
19. Densification of titanium powder during hot isostatic pressing10.1007/BF02645145 ↗
20. A comparative study of Spark Plasma Sintering (SPS), Hot Isostatic Pressing (HIP) and microwaves sintering techniques on p-type Bi 2Te 3 thermoelectric properties10.1016/j.materresbull.2012.04.019 ↗
21. Particle deformation during cold isostatic pressing of metal powders10.1179/pom.1977.20.4.199 ↗
22. Finite element modelling of cold isostatic pressing10.1016/S0955-2219(99)00280-0 ↗
23. Cold-isostatic pressing of metal powders: a review of the technology and recent developments10.1080/10408436.2021.1886043 ↗
24. Using microwaves to synthesize pure aluminum and metastable Al/Cu nanocomposites with superior properties10.1016/j.jmatprotec.2009.01.009 ↗
25. Microstructure and mechanical properties of aluminum matrix composites with bimodal-sized hybrid NbC-B4C reinforcements
26. Microwave sintering of metal powder materials (review)10.1007/s11015-022-01260-y ↗
27. Optimizing room-temperature thermoelectric performance of n-Type Bi2Te2.7Se0.310.1021/acsomega.1c05160 ↗
28. Microwave sintering of Bi2Te3- and PbTe-based alloys: structure and thermoelectric properties10.1007/s11664-013-2500-8 ↗
29. Optimum sintering method and temperature for cold compact Bismuth Telluride pellets for thermoelectric applications10.1016/j.jallcom.2021.160256 ↗
30. Electrochemical deposition of ternary and binary systems from an alkaline electrolyte-a demanding way for manufacturing p-doped bismuth and antimony tellurides for the use in thermoelectric elements10.1007/s10008-006-0217-9 ↗
31. A study on the electrochemical responses of p-type bismuth telluride-based thermoelectric materials in a 0.1 M NaCl solution: Comparing a nanocomposite with dispersed MoS2 nanoparticles and a single-phase alloy10.1016/j.jallcom.2019.152371 ↗
32. Microstructural characterization and corrosion behavior of lead, bismuth and antimony tellurides prepared by melting10.1016/j.jallcom.2013.03.071 ↗
33. Characterizations of bismuth telluride films from Mott-Schottky plot and spectroscopic ellipsometry10.1002/sia.2715 ↗
34. Sensitive analysis of calculation of corrosion rate according to standard approach10.1088/1757-899X/385/1/012031 ↗
35. An overview of the localized corrosion problems in seawater desalination plants - some recent case studies10.5004/dwt.2010.1479 ↗
36. S. Brossia, ASM Handbook, Volume 13B, Corrosion: Materials, Corrosion. 63.10, 2007, p. 983.
37. An additive approach to low temperature zero pressure sintering of bismuth antimony telluride thermoelectric materials10.1016/j.jpowsour.2016.12.092 ↗
38. Thermoelectric performance of monolayer Bi2Te2Se of ultra low lattice thermal conductivity
39. Effect of residual stress on the corrosion behavior of austenitic stainless steel10.4236/aces.2015.51007 ↗
40. Insights into the Electrodeposition of Bi[sub 2]Te[sub 3]10.1149/1.1509459 ↗
41. Relation between the semiconducting properties of a passive film and reduction reaction rates10.1149/1.3077576 ↗
42. EIS study of solid-state transformations in the passivation process of bismuth in sulfide solution10.1016/j.jelechem.2003.09.036 ↗
43. A hundred years of Tafel’s Equation: 1905-200510.1016/j.corsci.2005.07.002 ↗
44. Residual stress effects in stress-corrosion cracking10.1361/105994998770347891 ↗
45. Grain boundaries and dislocations10.1126/science.1071040 ↗
46. Grain growth effects on the corrosion behavior of nanocrystalline NdFeB magnets10.1016/S0010-938X(01)00123-8 ↗
47. Statistical model for intergranular corrosion growth kinetics10.1016/S0010-938X(02)00090-2 ↗
48. Mechanisms of Intergranular corrosion Al-Cu alloys10.1016/S0010-938X(70)80003-8 ↗
49. Passive film properties of bimodal grain size AA7075 aluminium alloy prepared by spark plasma sintering10.3390/ma13143236 ↗
50. Corrosion behavior of severely deformed pure and single-phase materials10.2320/matertrans.MF201935 ↗
51. Feng, Effect of high temperature on the corrosion behavior and passive film composition of 316 L stainless steel in high H2S-containing environments
52. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
53. Concernng the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
54. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
55. Electrochemical response of n-type bismuth telluride based thermoelectric materials in NaCl solutions: a comparison between a single-phase alloy and a nanocomposite containing MoS2 nano-particles10.1016/j.arabjc.2018.01.021 ↗
56. Corrosion behaviour of T92 steel in NaCl solution10.20964/2017.06.13 ↗
57. Using atomic force microscopy to measure thickness of passive film on stainless steel immersed in aqueous solution
58. Effect of concentration and surface roughness on corrosion behavior of Co-Cr-Mo alloy in hyaluronic acid
59. Simultaneous effect of surface roughness and passivity on corrosion resistance of metals
60. Surface roughness and the corrosion resistance of 21Cr ferritic stainless steel10.1016/j.corsci.2012.06.031 ↗