Analysis of the temperature dependent electrical parameters of the heterojunction obtained with Au nanoparticles decorated perovskite strontium titanate nanocubes
Source abstract
Abstract
Strontium titanate (STO) is one of the important members of the perovskite family and has a wide range of applications in optoelectronics. In this study, the rectifying properties of the heterojunction produced by gold (Au) decorated STO were investigated. Morphological and structural characterization of Au-STO material coated as a thin film, such as SEM, TEM, XRD was performed and the results showed that this structure is a suitable material for heterojunction structures. Current-voltage (I-V) measurements of Ni/AuSTO/n-Si heterojunction devices obtained by coating the Si surface with the spin coating method of Au-STO were performed in the dark and between 60 and 400 K. Additionally, capacitance-voltage (C-V) measurements of the device were made under the same conditions and between 80 and 360 K. Basic diode parameters such as ideality factor (n), barrier height (Phi(b)), series resistance (R-s) were determined from the I-V characteristic of the device using Thermionic emission (TE), Cheung and Norde functions. According to the TE method, the ideality factor of the device was calculated as 1.12 and the barrier height was 0.65 eV at 300 K. The obtained results showed that the Ni/Au-STO/n-Si heterojunction has rectifying properties. In all three calculation methods, as the application temperature increased, the ideality factor of the device decreased and on the other hand, the barrier height increased. This change showed the temperature sensitivity of the Au-STO/n-Si junction. (C) 2022 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Green perovskite light emitting diodes based on the ITO / Al 2 O 3 / CsPbBr 3 heterojunction structure10.1016/j.optmat.2018.01.012 ↗
2. High-gain broadband organolead trihalide perovskite photodetector based on a bipolar heterojunction phototransistor10.1016/j.orgel.2018.01.007 ↗
3. Plasmonic hole-transport-layer enabled self-powered hybrid perovskite photodetector using a modi fi ed perovskite deposition method in ambient air
4. The diode and photodiode performances of BaZrO3 perovskite-based device under the influence of thermal and light external stimuli10.1016/j.sna.2022.113413 ↗
5. Response and characteristics of TiO 2 / perovskite heterojunctions for CO gas sensors10.1016/j.jallcom.2019.04.238 ↗
6. Interface band structure engineering by ferroelectric polarization in perovskite solar cells10.1016/j.nanoen.2015.03.037 ↗
7. Rational construction of LaFeO3 perovskite nanoparticle-modified TiO2 nanotube arrays for visible-light driven photocatalytic activity10.3390/coatings8110374 ↗
8. Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications10.1039/C4CS00458B ↗
9. The synthesis of SrTiO3 nanocubes and the analysis of nearly ideal diode application of Ni/SrTiO3 nanocubes/n-Si heterojunctions10.1088/2053-1591/aaa745 ↗
10. SrTiO 3-based metal–insulator–semiconductor heterostructures10.1063/1.1363690 ↗
11. Fast oxygen sensors based on sputtered strontium titanate10.1016/0925-4005(91)80183-K ↗
12. Near-field examination of perovskite-based superlenses and superlens-enhanced probe-object coupling10.1038/ncomms1249 ↗
13. Impact of the electroforming process on the device stability of epitaxial Fe-doped SrTiO 3 resistive switching cells10.1063/1.3267485 ↗
14. Lines · 2001
15. The phase transition of strontium titanate10.1098/rsta.1996.0130 ↗
16. Synthesis of nickel nanoparticles-deposited strontium titanate nanocubes (Ni-STO) and heterojunction electrical applications over a wide temperature range10.1016/j.mseb.2021.115479 ↗
17. Oxygen vacancies at the Au/SrTiO 3 (001) interface: stabilities, electronic properties and effect on photocatalysis10.1039/C6CP07087F ↗
18. Nitrogen-doped ultrathin graphene encapsulated Cu nanoparticles decorated on SrTiO3 as an efficient water oxidation photocatalyst with activity comparable to BiVO4 under visible-light irradiation10.1016/j.apcatb.2020.119352 ↗
19. Plasmonic Ag nanoparticles decorated SrTiO3 nanocubes for enhanced photocatalytic CO2 reduction and H2 evolution under visible light irradiation10.1016/j.jcou.2019.06.024 ↗
20. TiO2/SrTiO3 and SrTiO3 microspheres decorated with Rh, Ru or Pt nanoparticles: highly UV–vis responsible photoactivity and mechanism10.1016/j.jcat.2017.04.005 ↗
21. Photocatalytic degradation of dyes over Au decorated SrTiO3 nanoparticles under simulated sunlight and visible light irradiation10.2109/jcersj2.17244 ↗
22. Redox‐based resistive switching memories–nanoionic mechanisms, prospects, and challenges10.1002/adma.200900375 ↗
23. Resistive switching and its suppression in Pt/Nb: SrTiO 3 junctions10.1038/ncomms4990 ↗
24. Fabrication and electrical characterization of Au/p-Si/STO/Au contact10.1016/j.cap.2008.09.007 ↗
25. The study on characterizations of SrTiO3 thin films with different growth temperatures10.1016/j.spmi.2014.10.018 ↗
26. Temperature dependent electronic transport properties of heterojunctions formed between perovskite SrTiO 3 nanocubes and silicon
27. N.R. Varra, D. V Vivekananda, G. Sai Krishna, B. Sri Vivek, and P. Vimala, Electrical Characteristics of Au/n-GaN Schottky Junction with a High-k SrTiO3 Insulating Layer, 2019.
28. Microstructural and interface properties of Au/SrTiO3 (STO)/n-GaN heterojunction with an e-beam evaporated high-k STO interlayer10.1016/j.jallcom.2020.153775 ↗
29. International Series of Monographs in the Science of the Solid State
30. Milnes · 2012
31. On current-voltage and capacitance-voltage characteristics of metal-semiconductor contacts10.3906/fiz-2007-11 ↗
32. Journal of Environmental Chemical Engineering Photodegradation of organic pollutants using heterojunctions: A review
33. Solvothermal fabrication of La-WO3/SrTiO3 heterojunction with high photocatalytic performance under visible light irradiation10.1016/j.solmat.2017.12.005 ↗
34. Temperature-dependent photovoltage response in La0. 9Li0. 1MnO3/SrTiO3-Nb heterojunction induced by a low intensity pulse laser10.1016/j.ssc.2016.12.012 ↗
35. Magnetic field-induced bipolar resistive switching and negative differential resistance in (110) SrTiO3: Nb/ZnO heterojunctions10.1016/j.physb.2017.06.047 ↗
36. Rectifying characteristics and magnetoresistance in La0. 9Sr0. 1MnO3/Nb-doped SrTiO3 heterojunctions10.1016/j.mseb.2007.07.100 ↗
37. Semiconductor Heterostructure SrTiO3/CeO2 Electrolyte Membrane Fuel Cells10.1149/2.0082005JES ↗
38. Synaptic memory devices from CoO/Nb: SrTiO3 junction10.1098/rsos.181098 ↗
39. Monodisperse Au nanoparticles for selective electrocatalytic reduction of CO2 to CO10.1021/ja409445p ↗
40. Extraction of electronic parameters of Schottky diode based on an organic Indigotindisulfonate Sodium (IS)10.1016/j.ssc.2010.05.043 ↗
41. Frequency and temperature dependence of the depletion voltage from CV measurements for irradiated Si detectors10.1016/S0168-9002(02)01353-0 ↗
42. The effect of different frequencies and illuminations on the electrical behavior of MoO3/Si heterojunctions
43. Temperature dependent electrical and dielectric properties of Au/polyvinyl alcohol (Ni, Zn-doped)/n-Si Schottky diodes10.1016/j.microrel.2009.09.005 ↗
44. The investigation of the electrical properties of Fe3O4/n-Si heterojunctions in a wide temperature range10.1016/j.jcis.2016.04.006 ↗
45. Temperature and frequency dependent electrical and dielectric properties of Al/SiO2/p-Si (MOS) structure10.1016/j.mee.2005.04.008 ↗
46. Metal-semiconductor contacts
47. The current transformer mechanism and structural properties of novel Al/BODIPY/pSi and Au/BODIPY/pSi heterojunctions10.1016/j.mssp.2021.105805 ↗
48. Current–voltage and capacitance–voltage characteristics of polypyrrole/p-InP structure10.1016/j.vacuum.2004.10.003 ↗
49. Analysis of current-voltage-temperature (I-V-T) and capacitance-voltage-temperature (C-V-T) characteristics of Ni/Au Schottky contacts on n-type InP
50. Temperature dependency and carrier transport mechanisms of Ti/p-type InP Schottky rectifiers10.1016/j.jallcom.2010.05.074 ↗
51. Functionalized boron-dipyrromethenes and their applications
52. Temperature-dependent CV characteristics of Au/ZnO/n-Si device obtained by atomic layer deposition technique
53. Effect of temperature on the capacitance–frequency and conductance–voltage characteristics of polyaniline/p-Si/Al MIS device at high frequencies10.1016/j.microrel.2012.02.016 ↗
54. A. Yeşildağ, M. Erdoğan, Ö Sevgili, Z. Çaldıran, İ Orak, Optical and Electrical Properties of Pyrene–Imine Organic Interface Layer Based on p-Si, Journal of Electronic Materials 50 (11), 6448–6458.10.1007/s11664-021-09178-y ↗
55. Parameter extraction from non-ideal C− V characteristics of a Schottky diode with and without interfacial layer10.1016/0038-1101(92)90286-L ↗
56. Sze · 2008
57. Chemical Trends in Schottky Barriers: Charge Transfer into Adsorbate-induced Gap States and Defects
58. The physics and chemistry of the Schottky barrier height10.1063/1.4858400 ↗
59. Barrier height modification of n-InP using a silver nanoparticles loaded graphene oxide as an interlayer in a wide temperature range10.1007/s11664-019-07088-8 ↗
60. Synthesis and characterization of reduced graphene oxide/rhodamine 101 (rGO-Rh101) nanocomposites and their heterojunction performance in rGO-Rh101/p-Si device configuration10.1007/s11664-017-5758-4 ↗
61. Effect of metal interaction on the Schottky barrier height on adsorbate-terminated silicon surfaces10.1016/j.apsusc.2013.07.162 ↗
62. Dependence of characteristic diode parameters on sample temperature in Ni/epitaxy n-Si contacts10.1016/j.mssp.2010.12.010 ↗
63. M. Zhang, J. Knoch, Q.T. Zhao, S. Lenk, U. Breuer, and S. Mantl, Schottky barrier height modulation using dopant segregation in Schottky-barrier Abstract:, Proceedings of 35th European Solid-State Device Research Conference, 2005. ESSDERC 2005., vol. 1, no. 1, pp. 457–460, 2005, doi: 10.1109/ESSDER.2005.1546683.10.1109/ESSDER.2005.1546683 ↗
64. Determination of the laterally homogeneous barrier height of thermally annealed and unannealed Au/p-InP/Zn-Au Schottky barrier diodes10.1016/j.apsusc.2007.11.050 ↗
65. Temperature dependence of the electrical and interface states of the Sn/Rhodamine-101/p-Si Schottky structures10.1016/j.synthmet.2008.11.025 ↗
66. The effect of high temperatures on the electrical characteristics of Au / n-GaAs Schottky diodes10.1016/j.physb.2015.08.016 ↗
67. Schottky diode performance of an Au/Pd/GaAs device fabricated by deposition of monodisperse palladium nanoparticles over a p-type GaAs substrate10.1016/j.mssp.2014.06.022 ↗
68. Electron transport at metal-semiconductor interfaces: General theory10.1103/PhysRevB.45.13509 ↗
69. Interface Schottky barrier engineering via strain in metal–semiconductor composites10.1039/C5NR05583K ↗
70. The role of molybdenum trioxide in the change of electrical properties of Cr/MoO3/n-Si heterojunction and electrical characterization of this device depending on temperature10.1016/j.sna.2021.112765 ↗
71. Interpreting the nonideal reverse bias CV characteristics and importance of the dependence of Schottky barrier height on applied voltage10.1016/0921-4526(94)00229-O ↗
72. Series resistance determination of Au/Polypyrrole/p-Si/Al structure by current–voltage measurements at low temperatures10.1016/j.msec.2008.12.006 ↗
73. Materials Science in Semiconductor Processing Current – voltage and capacitance – voltage characteristics of Al Schottky contacts to strained Si-on-insulator in the wide temperature range10.1016/j.mssp.2015.05.043 ↗
74. Effect of atomic-layer-deposited HfO2 thin-film interfacial layer on the electrical properties of Au/Ti/n-GaAs Schottky diode
75. Synthesis and characterization of p-GaSe thin films and the analyses of I–V and C–V measurements of p-GaSe/p-Si heterojunction under electron irradiation10.1080/10420150.2017.1377713 ↗
76. The aromatic thermosetting copolyester for schottky diode applications in a wide temperature range10.1007/s11664-019-07738-x ↗
77. Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes10.1088/0022-3727/4/10/319 ↗
78. The source of negative capacitance and anomalous peak in the forward bias capacitance-voltage in Cr/p-si Schottky barrier diodes (SBDs)10.1016/j.mssp.2015.05.044 ↗
79. Electrical characterizations of Au/ZnO/n-GaAs Schottky diodes under distinct illumination intensities
80. A. Yeşildağ, M. Erdoğan, Ö Sevgili, Z. Çaldıran, İ Orak, Optical and Electrical Properties of Pyrene–Imine Organic Interface Layer Based on p-Si, Journal of Electronic Materials 50 (11), 6448–6458.10.1007/s11664-021-09178-y ↗