journal article·2022-08

Additive engineering on spiro-OMeTAD hole transport material for CsPbI3 all-inorganic perovskite solar cells with improved performance and stability

Lei Zhang, Bingquan Han, Zhiyuan Liu, Yuxin Yao, Lingbo Xu, Peng Wang, Ping Lin, Xiaoping Wu, Xuegong Yu, Can Cui

Publisher page

Abstract

CsPbI 3 all-inorganic perovskite has now drawn much attention due to its superior thermal stability compared with the organic-inorganic hybrid counterparts. Despite the great progress achieved recently in this field, CsPbI 3 still suffers from low phase stability when exposed to moisture. We found the phase transition of CsPbI 3 would be accelerated after depositing the conventional hole transport material (HTM) 2,2′,7,7′-Tetrakis[N,N-di(4-methoxyphenyl)amino]− 9,9′-spirobifluorene (spiro-OMeTAD). This is attributed to the negative effects of the additives in spiro-OMeTAD HTM: the hydrolysis of lithium bis(trifluoromethylsulfonyl)imide (LiTFSI), the corrosivity of 4-tert-butylpyridine (TBP), and the evaporation of TBP. By slightly modifying the additive content, full coordination between LiTFSI and TBP could be achieved and the negative effects mentioned above could be mitigated. Furthermore, tris(2-(1 H-pyrazol-1-yl)− 4-tert-butylpyridine)cobalt(III)-tris(bis(trifluoromethylsulfonyl)imide) (Co(III)TFSI) was added to promote oxidation of spiro-OMeTAD HTM in inert environment. With these approaches of additive engineering, HTMs with better interface contact and charge transport capability could be obtained. The device with optimized spiro-OMeTAD HTM achieved a champion power conversion efficiency (PCE) of 10.61% compared with 6.63% of the control one. Moreover, the optimal device maintained 81% of its initial PCE after storage for 30 days, exceeding that (68%) of the control one. Our results highlight the importance of spiro-OMeTAD HTM on the stability of CsPbI 3 all-inorganic perovskite and provide a facile and feasible way to increase the stability and performance of corresponding solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
3. Highly stable inorganic lead halide Perovskite toward efficient photovoltaics10.1021/acs.accounts.1c00343 ↗
4. Strategies for highly efficient and stable cesium lead iodide perovskite photovoltaics: mechanisms and processes10.1039/D1TC05851G ↗
5. Thermodynamically stable orthorhombic γ-CsPbI3 thin films for high-performance photovoltaics10.1021/jacs.8b06050 ↗
6. Stability of the CsPbI3 perovskite: from fundamentals to improvements10.1039/D1TA01252E ↗
7. Black phase of inorganic perovskite stabilized with carboxyimidazolium iodide for stable and efficient inverted perovskite solar cells10.1021/acsami.1c23637 ↗
8. Efficient α-CsPbI3 photovoltaics with surface terminated organic cations10.1016/j.joule.2018.06.013 ↗
9. Thermochromic halide perovskite solar cells10.1038/s41563-017-0006-0 ↗
10. Organic tetrabutylammonium cation intercalation to heal inorganic CsPbI3 perovskite10.1002/anie.202102538 ↗
11. Robust molecular-dipole-induced surface functionalization of inorganic perovskites for efficient solar cells10.1039/D1TA09756C ↗
12. Temperature-reliable low-dimensional perovskites passivated black-phase CsPbI3 toward stable and efficient photovoltaics
13. Hole transporting materials in inorganic CsPbI3−xBrx solar cells: fundamentals, criteria and opportunities10.1016/j.mattod.2021.11.017 ↗
14. Low-cost dopant additive-free hole-transporting material for a robust perovskite solar cell with efficiency exceeding 21%10.1021/acsenergylett.0c02210 ↗
15. Understanding the influence of anion exchange on the hole transport layer for efficient and humidity-stable perovskite solar cells10.1021/acssuschemeng.1c05848 ↗
16. Efficient (>20%) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts10.1002/anie.202102466 ↗
17. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells10.1016/j.joule.2020.11.020 ↗
18. Oxalate pushes efficiency of CsPb0.7Sn0.3IBr2 based all-inorganic perovskite solar cells to over 14%
19. Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells10.1002/anie.202109724 ↗
20. Li-TFSI endohedral metal-organic frameworks in stable perovskite solar cells for anti-deliquescent and restricting ion migration10.1016/j.cej.2021.132481 ↗
21. Stability improvement of perovskite solar cells by the moisture-resistant PMMA:Spiro-OMeTAD hole transport layer10.3390/polym14020343 ↗
22. Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review10.1039/D0TA11564A ↗
23. Highly efficient and stable perovskite solar cells using thionyl chloride as a p-type dopant for spiro-OMeTAD10.1016/j.jallcom.2020.156500 ↗
24. Thiosemicarbazide-complexed SnO2 electron transport layers for high-efficiency MAPbI3 perovskite solar cells10.1039/D1SE01279G ↗
25. Multifunctional two-dimensional polymers for perovskite solar cells with efficiency exceeding 24%10.1021/acsenergylett.1c02812 ↗
26. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
27. Dual additive for simultaneous improvement of photovoltaic performance and stability of perovskite solar cell
28. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
29. Simultaneous interfacial modification and crystallization control by biguanide hydrochloride for stable perovskite solar cells with PCE of 24.4%
30. Efficient and stable CsPbI3 inorganic perovskite photovoltaics enabled by crystal secondary growth10.1002/adma.202103688 ↗
31. Molten-salt-assisted CsPbI3 perovskite crystallization for nearly 20%-efficiency solar cells10.1002/adma.202103770 ↗
32. Simultaneous improvement of the power conversion efficiency and stability of perovskite solar cells by doping PMMA Polymer in Spiro-OMeTAD-based hole-transporting layer10.1002/solr.202100408 ↗
33. Unveiling the role of tBP-LiTFSI complexes in perovskite solar cells10.1021/jacs.8b09809 ↗
34. Doping strategies for small molecule organic hole-transport materials: impacts on perovskite solar cell performance and stability10.1039/C8SC05284K ↗
35. Effect of fluorine substitution in a hole dopant on the photovoltaic performance of perovskite solar cells10.1021/acsenergylett.1c02807 ↗
36. Role of 4- tert -butylpyridine as a hole transport layer morphological controller in perovskite solar cells10.1021/acs.nanolett.6b02158 ↗
37. Synergistic effect of NiO and Spiro-OMeTAD for hole transfer in perovskite solar cells10.1007/s11664-021-09193-z ↗
38. Alkaline-earth bis(trifluoromethanesulfonimide) additives for efficient and stable perovskite solar cells10.1016/j.nanoen.2019.104412 ↗
39. Temporal and spatial pinhole constraints in small-molecule hole transport layers for stable and efficient perovskite photovoltaics10.1039/C9TA01070J ↗
40. A universal dopant-free polymeric hole-transporting material for efficient and stable all-inorganic and organic-inorganic perovskite solar cells10.1021/acsami.1c13792 ↗
41. Efficient perovskite solar cells enabled by large dimensional structured hole transporting materials10.1039/D0TA10449C ↗
42. Montmorillonite as bifunctional buffer layer material for hybrid perovskite solar cells with protection from corrosion and retarding recombination10.1039/C4TA01550A ↗
43. Lithium salts as “redox active” p-type dopants for organic semiconductors and their impact in solid-state dye-sensitized solar cells10.1039/c2cp44397j ↗
44. Nanostructured TiO2/CH3NH3PbI3 heterojunction solar cells employing spiro-OMeTAD/Co-complex as hole-transporting material10.1039/c3ta12681a ↗
45. Co(III) complexes as p-dopants in solid-state dye-sensitized solar cells10.1021/cm400796u ↗
46. New insight into the grafted transition metal ions in trilacunary keggin polyoxometalates dopants for efficient and stable perovskite solar cells10.1016/j.jpowsour.2021.230073 ↗
47. Evidence of Spiro-OMeTAD de-doping by tert-butylpyridine additive in hole-transporting layers for perovskite solar cells10.1016/j.chempr.2019.04.003 ↗
48. Antisolvent engineering on low-temperature processed CsPbI3 inorganic perovskites for improved performances of solar cells10.1088/1361-6528/abde03 ↗
49. Cesium lead inorganic solar cell with efficiency beyond 18% via reduced charge recombination10.1002/adma.201905143 ↗
50. Efficient stabilization and passivation for low-temperature-processed γ-CsPbI3 solar cells10.1021/acsami.1c01792 ↗
51. Lead acetate precursors for preparing CsPbI3 light harvester layers of inorganic perovskite solar cells10.1016/j.solener.2021.05.033 ↗
52. Preparation of tortuous 3D γ-CsPbI3 films at low temperature by CaI2 as dopant for highly efficient perovskite solar cells
53. Zinc ion functional doping for all-inorganic planar CsPbIBr2 perovskite solar cells with efficiency over 10.5%10.1039/D0TC05455K ↗