Realize larger grain size of CH3NH3PbI3 film with reduced non-radiative recombination for high performance perovskite solar cells via precursor colloidal size engineering
Source abstract
Abstract
Abstract In CH3NH3PbI3 perovskite solar cells, enhancement grain size of CH3NH3PbI3 to reduce the non-radiative at grain boundaries is an important way to reach high performance perovskite solar cell. However, it is still a challenge to enhance the grain size of CH3NH3PbI3 through a simple and low cost way. In this work, a larger precursor colloidal size is realized through tuning morphology of precursor CH3NH3I using a polar solvent of ethanol during purification, yielding a larger grain size of CH3NH3PbI3 film, and the as-prepared perovskite solar cells are shown to be dramatically increased to 17.49% with an increase in short circuit density, fill factor and open circuit voltage, as compared to that (14.28%) in the control device with CH3NH3I purified by non-polar solvent of diethyl ether. The investigation result showed the increased efficiency of perovskite solar cells prepared by ethanol purification is ascribed to a faster charge transfer at CH3NH3PbI3/TiO2 interface resulting from the reduced grain boundary defects. Our work provides a route for improving the CH3NH3PbI3 device efficiency through a simple yet effective approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A balanced cation exchange reaction toward highly uniform and pure phase FA1−xMAxPbI3 perovskite films10.1039/C6TA05727F ↗
2. Characterization of an abnormal photoluminescence behavior upon crystal-phase transition of perovskite CH3NH3PbI310.1039/C5CP02605A ↗
3. Grain engineering by ultrasonic substrate vibration post-treatment of wet perovskite films for annealing-free, high performance, and stable perovskite solar cells10.1039/C8NR00540K ↗
4. Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites10.1038/s41467-017-02331-4 ↗
5. Enhancing the power conversion efficiency of perovskite solar cells via the controlled growth of perovskite nanowires10.1016/j.nanoen.2018.06.054 ↗
6. Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells10.1063/1.4906073 ↗
7. Lewis acid-base adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
8. Perovskite solar cell with an efficient TiO2 compact film10.1021/am503728d ↗
9. Enhanced grain size and crystallinity in CH3NH3PbI3 perovskite films by metal additives to the single-step solution fabrication process10.1557/adv.2018.413 ↗
10. Solvent-antisolvent ambient processed large grain size perovskite thin films for high-performance solar cells
11. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
12. Intrinsic thermal decomposition pathways of lead halide perovskites APbX310.1016/j.solmat.2020.110559 ↗
13. Easy strategy to enhance thermal stability of planar PSCs by perovskite defect passivation and low-temperature carbon-based electrode10.1021/acsami.0c05878 ↗
14. Understanding the degradation of Spiro-OMeTAD-based perovskite solar cells at high temperature10.1002/solr.202000305 ↗
15. Synergistic effect of N,N-dimethylformamide and hydrochloric acid on the growth of MAPbI3 perovskite films for solar cells10.1021/acsomega.0c04102 ↗
16. Control of PbI2 nucleation and crystallization: towards efficient perovskite solar cells based on vapor-assisted solution process10.1088/2053-1591/aab8b4 ↗
17. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications10.1039/C8CS00656C ↗
18. Tuning nucleation sites to enable monolayer perovskite films for highly efficient perovskite solar cells10.3390/coatings8110408 ↗
19. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
20. Hybrid halide perovskite solar cell precursors: colloidal chemistry and coordination engineering behind device processing for high efficiency10.1021/jacs.5b00321 ↗
21. Engineering halide perovskite crystals through precursor chemistry10.1002/smll.201903613 ↗
22. Direct observation of cation-exchange in liquid-to-solid phase transformation in FA1−xMAxPbI3 based perovskite solar cells10.1039/C8TA01642A ↗
23. Achieving the high phase purity of CH3NH3PbI3 film by two-step solution processable crystal engineering10.1016/j.jmst.2017.11.003 ↗
24. Ultra-smooth CsPbI2Br film via programmable crystallization process for high-efficiency inorganic perovskite solar cells10.1016/j.jmst.2020.05.073 ↗
25. Defect passivation strategy for inorganic CsPbI2Br perovskite solar cell with a high-efficiency of 16.77%10.1016/j.jmst.2020.08.051 ↗
26. Preparation of hysteresis-free flexible perovskite solar cells via interfacial modification10.1016/j.jmst.2020.05.029 ↗
27. Improved perovskite solar cell efficiency by tuning the colloidal size and free ion concentration in precursor solution using formic acid additive10.1016/j.jechem.2019.04.019 ↗
28. Colloidal engineering for monolayer CH3NH3PbI3 films toward high performance perovskite solar cells10.1039/C7TA08761F ↗
29. Facile and scalable fabrication of highly efficient lead iodide perovskite thin-film solar cells in air using gas pump method10.1021/acsami.6b05862 ↗
30. Fast drying boosted performance improvement of low-temperature paintable carbon-based perovskite solar cell10.1021/acssuschemeng.7b01556 ↗
31. Significance of lognormal nanocrystal size distributions
32. Diffusion-limited lifetime in semiconductors10.1103/PhysRevB.23.5495 ↗
33. A carrier density dependent diffusion coefficient, recombination rate and diffusion length in MAPbI3 and MAPbBr3 crystals measured under one- and two-photon excitations10.1039/D0TC02283G ↗
34. Properties of contact and bulk impedances in hybrid lead halide perovskite solar cells including inductive loop elements10.1021/acs.jpcc.6b01728 ↗
35. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗