Potential replacement to lead: Alkali metal potassium and transition metal zinc in organo-metal halide perovskite materials
Source abstract
Abstract
Abstract Following the plenty of research work on solving the issue of the popular and promising perovskite solar cells, this article is focused on methylammonium lead iodide (MAPbI3) and the alternative element which can perform as efficiently as lead does. Here, not only the different concentrations of the substitute element are investigated, but also higher stable perovskite is introduced as well. Several characterization techniques are used to assure the validity of the results. The large alkali metal potassium (K) and the transition metal zinc (Zn) are studied side by side. The results are interesting when the 5% concentration of the KI alloyed MAPbI3 shows considerable transport properties like 54 nm diffusion length, 245 × 10−9 Sm−1 photoconductivity, and significant majority and minority carrier mobility–lifetime product as compared to MAPbI3 but it becomes more interesting when after 60 days the 5% concentration of the aged ZnCl2 alloyed MAPbI3 turns into a leading element of this research by showing high stability among of all. The morphology investigations show both perovskite materials achieve large islands which are desired morphology in perovskite materials as well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Themed issue on perovskite solar cells: Research on metal halide perovskite solar cells towards deeper understanding, upscalable fabrication, long-term stability and Pb-free alternatives10.1039/C8SE90060D ↗
2. Design of a novel and highly stable lead-free Cs2NaBiI6 double perovskite for photovoltaic application10.1039/C8SE00154E ↗
3. Perovskite solar cells go lead free10.1016/j.joule.2017.09.007 ↗
4. Binary metal zinc-lead perovskite built-in air ambient: towards lead-less and stable perovskite materials10.1016/j.solmat.2018.11.021 ↗
5. Versatile perovskite solar cell encapsulation by low-temperature ALD-Al2O3 with long-term stability improvement10.1039/C8SE00282G ↗
6. Liu, High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2
7. Tailored lead iodide growth for efficient flexible perovskite solar cells and thin-film tandem devices10.1038/s41427-018-0099-1 ↗
8. Scalable solution coating of the absorber for perovskite solar cells10.1016/j.jechem.2017.10.005 ↗
9. Research progress on large-area perovskite thin films and solar modules
10. Prospects for low-toxicity lead-free perovskite solar cells10.1038/s41467-019-08918-3 ↗
11. Mixed-organic-cation tin iodide for lead-free perovskite solar cells with an efficiency of 8.12%10.1002/advs.201700204 ↗
12. Lead-free tin-halide perovskite solar cells with 13% efficiency10.1016/j.nanoen.2020.104858 ↗
13. Numerical simulation of highly efficient lead-free all-perovskite tandem solar cell10.1016/j.solener.2020.08.003 ↗
14. Stable lead-free perovskite solar cells: a first-principles investigation10.1016/j.saa.2020.118493 ↗
15. Dimension-controlled growth of antimony-based perovskite-like halides for lead-free and semitransparent photovoltaics10.1021/acsami.0c00681 ↗
16. Structural, electronic and optical properties of lead-free antimony-copper based hybrid double perovskites for photovoltaics and optoelectronics by first principles calculations10.1016/j.commatsci.2020.110009 ↗
17. Compositional tuning of carrier dynamics in Cs2Na1- xAgxBiCl6 double-perovskite nanocrystals10.1021/acsenergylett.0c00914 ↗
18. Electronic and optical properties of lead-free hybrid double perovskites for photovoltaic and optoelectronic applications10.1038/s41598-018-37132-2 ↗
19. Predicted lead-free perovskites for solar cells10.1021/acs.chemmater.7b04036 ↗
20. Copper-substituted lead perovskite materials constructed with different halides for working (CH3NH3)2CuX4 -based perovskite solar cells from experimental and theoretical view10.1021/acsami.8b00495 ↗
21. A step towards environmental benign Mg/Pb based binary metal mixed halide perovskite material10.1016/j.solener.2018.05.090 ↗
22. The new eco-friendly lead-free zirconate perovskites doped with chalcogens for solar cells: ab initio calculations10.1016/j.optmat.2020.110442 ↗
23. Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%10.1016/j.nanoen.2018.08.012 ↗
24. Structurally reconstructed CsPbI2 r perovskite for highly stable and square-centimeter all-inorganic perovskite solar cells
25. Gas-solid reaction based over one-micrometer thick stable perovskite films for efficient solar cells and modules10.1038/s41467-018-06317-8 ↗
26. Accelerated discovery of stable lead-free hybrid organic-inorganic perovskites via machine learning10.1038/s41467-018-05761-w ↗
27. Impact of moisture on photoexcited charge carrier dynamics in methylammonium lead halide perovskites10.1021/acs.jpclett.8b02595 ↗
28. Fabrication of fully non-vacuum processed perovskite solar cells using an inorganic CuSCN hole-transporting material and carbon-back contact10.1039/C8SE00450A ↗
29. Perovskite thin film materials stabilized and enhanced by zinc(II) doping10.3390/app9081678 ↗
30. Evolution of diffusion length and trap state induced by chloride in perovskite solar cell10.1021/acs.jpcc.6b06914 ↗
31. Enhancing the photovoltaic performance of planar heterojunction perovskite solar cells by doping the perovskite layer with alkali metal ions10.1039/C6TA06851K ↗
32. Enhancing the photovoltaic performance of perovskite solar cells by potassium ions doping10.1007/s10854-018-0477-z ↗
33. Correlated electrical and chemical nanoscale properties in potassium-passivated, triple-cation perovskite solar cells
34. Preparation of mixed-ion and inorganic perovskite films using water and isopropanol as solvents for solar cell applications10.1039/C7SE00538E ↗
35. High-performance planar perovskite solar cells: influence of solvent upon performance10.1016/j.apmt.2017.11.003 ↗
36. Steady-state photocarrier grating technique for diffusion length measurement in photoconductive insulators10.1063/1.97548 ↗
37. Steady-state photocarrier grating technique for the minority-carrier characterisation of thin-film semiconductors10.1088/1742-6596/253/1/012081 ↗
38. X. Guo, Prepration and property studies of organic-inorganic hybrid semiconductor materials for solar cell applications, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=case1458736601 (Accessed October 17, 2020).
39. Smooth perovskite thin films and efficient perovskite solar cells prepared by the hybrid deposition method10.1039/C5TA03593G ↗
40. Growth and properties of lead iodide thin films by spin coating10.1007/s12034-016-1282-z ↗
41. ZnO-assisted growth of CH3NH3PbI3–xClx film and efficient planar perovskite solar cells with a TiO2/ZnO/C60 electron transport trilayer10.1021/acsami.8b05560 ↗
42. MAPbI3-xClx mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
43. Zinc hydride complexes NaZn2(CH3)2H3 and NaZnH310.1021/ja00749a019 ↗
44. On the structure and electrical conductivity of the fluoperovskite NaZnF310.1016/0167-2738(90)90406-H ↗
45. Synergistic effect of PbI2 passivation and chlorine inclusion yielding high open-circuit voltage exceeding 1.15 V in both mesoscopic and inverted planar CH3NH3PbI3(Cl)-based perovskite solar cells10.1002/adfm.201603968 ↗
46. The role of chlorine in the formation process of “CH3NH3PbI3-xClx” perovskite10.1002/adfm.201401872 ↗
47. Improved carriers injection capacity in perovskite solar cells by introducing A-site interstitial defects10.1039/C7TA01203A ↗
48. Structure, optical and electrical properties of ZnSe thin films10.1016/j.physb.2004.12.022 ↗
49. Highly-improved performance of inverted planar perovskite solar cells by glucose modification10.1039/D0TC00365D ↗
50. Enhancing the photovoltaic performance of perovskite solar cells by potassium ions doping10.1007/s10854-018-0477-z ↗
51. Phase segregation in potassium-doped lead halide perovskites from 39K solid-state NMR at 21.1 T10.1021/jacs.8b03191 ↗
52. N. Shrestha, S.C. Watthage, Z. Song, P.J. Roland, A.B. Phillips, M.J. Heben, R.J. Ellingson, Influence of Mono- and Di-valent Metal Additives on Morphology and Charge Carrier Dynamics of CH3NH3PbI3Perovskite, in: 2017 IEEE 44th Photovolt. Spec. Conf., 2017: pp. 1030–1033. https://doi.org/10.1109/PVSC.2017.8366620.10.1109/PVSC.2017.8366620 ↗
53. Potassium doping-induced variations in the structures and photoelectric properties of a MAPbI3 perovskite and a MAPbI3/TiO2 junction10.1039/D0CP03630G ↗
54. Elucidating the mechanisms underlying PCBM enhancement of CH3NH3PbI3 perovskite solar cells using GIXRD and XAFS10.1039/C9TA10763K ↗
55. Infrared spectroscopic study of vibrational modes in methylammonium lead halide perovskites10.1021/acs.jpclett.5b01309 ↗
56. Probe decomposition of methylammonium lead iodide perovskite in N2 and O2 by in situ infrared spectroscopy10.1021/acs.jpca.6b12170 ↗
57. Ultrasensitive perovskite photodetectors by Co partially substituted hybrid perovskite10.1021/acssuschemeng.8b02363 ↗
58. Characterization of quenching defects in methylammonium lead triiodide (CH3NH3PbI3)10.1016/j.jlumin.2017.08.055 ↗
59. I-III-VI core/shell QDs: Synthesis, characterizations and applications10.1016/j.jlumin.2019.116912 ↗
60. Multi-step slow annealing perovskite films for high performance planar perovskite solar cells10.1016/j.solmat.2015.06.018 ↗
61. Comparative study of the effect of Mg, Zn and Ag dopants on properties of titanium dioxide as mesoporous ETL for photovoltaic application10.1016/j.matchemphys.2020.123730 ↗
62. The effect of decomposed PbI2 on microscopic mechanisms of scattering in CH3NH3PbI3 films10.1186/s11671-019-3022-y ↗
63. Electron tunneling in heavily In-doped polycrystalline CdS films10.1063/1.334170 ↗
64. Effect of eosin y dye on electrical properties of ZnO film synthesized by sol-gel technique10.1007/s11664-013-2925-0 ↗
65. Determined the energy gap and activation energies of some transition metal complexes of liquid crystalline Schiff base.
66. Thermally and optical-induced effect on optical and electrical parameters of Ag-doped CdSe thin films10.1007/s40195-015-0236-6 ↗
67. Quantitative measurement of transport properties: Ag-doped nanocrystalline CdS thin films10.1039/C7RA02904G ↗
68. Effect of deposition pressure on structural, optical and electrical properties of zinc selenide thin films10.1016/j.physb.2011.02.022 ↗