journal article·2023-06

Modifying the photoelectric performance of SnO2 via D-arginine monohydrochloride for high-performance perovskite solar cells

Kai Zhang, Xinyu Tan, Peng Xiang, Bowen Li, Ji Li, Yanqi Ren, Ying Zhu, Yiming Liu, Wensheng Yan, Xiaobo Chen, Hongwei Han

Publisher page

Abstract

Although widely used as conducting substrates for solar cells, indium-tin oxide-based (ITO) electrodes’ potential for improvement of visible light transmittance is frequently overlooked of perovskite solar cells (PSCs) as most work focuses on the improvement of the working components (e.g., light absorber, etc) of the solar cells. This work shows a great improvement on solar cell performance by increasing the transmittance (up to 94 %) of the SnO 2 /ITO electrode through adjusting the refractive index of the SnO 2 with D-arginine monohydrochloride ( D -Arg) and introducing extra amino group, carboxyl groups and chloride ions to passivate interface defects. A 21.74 % of the championship power conversion efficiency is obtained, in comparison to the 19.58 % of the control device, and an increase in the short-circuit current from 23.26 to 24.51 mA cm −2. Long-term stability is demonstrated with more than 86 % retention rate of the initial when stored in an air environment (10 % −25 % RH, 25 ℃), for 720 h. Therefore, this work provides a new and general approach in improving the performance of PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Naphtho [1, 2-b: 4, 3-b′] dithiophene-based hole transporting materials for high-performance perovskite solar cells: molecular engineering and opto-electronic properties10.1039/C8TA02071J ↗
2. Dual effective dopant based hole transport layer for stable and efficient perovskite solar cells10.1016/j.nanoen.2020.104673 ↗
3. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
4. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
5. Available onlinehttps://www.nrel.gov/pv/cell-efficiency.html, Best Research-Cell Efficiency Chart (Accessed on 17 Oct 2022).
6. Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
7. In situ growth of ultra-thin perovskitoid layer to stabilize and passivate MAPbI3 for efficient and stable photovoltaics10.1016/j.esci.2021.09.005 ↗
8. Up-Scalable fabrication of SnO2 with multifunctional interface for high performance perovskite solar modules10.1007/s40820-021-00675-7 ↗
9. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
10. High-performance planar perovskite solar cells with a reduced energy barrier and enhanced charge extraction via a Na2WO4-modified SnO2 electron transport layer10.1021/acsami.1c22452 ↗
11. Multifunctional polymer‐regulated SnO2 nanocrystals enhance interface contact for efficient and stable planar perovskite solar cells10.1002/adma.202003990 ↗
12. Yttrium‐doped Sn3O4 two‐dimensional electron transport material for perovskite solar cells with efficiency over 23%10.1002/eom2.12202 ↗
13. Multifunctional CNT: TiO2 additives in spiro‐OMeTAD layer for highly efficient and stable perovskite solar cells10.1002/eom2.12099 ↗
14. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
15. Tailoring multifunctional anion modifiers to modulate interfacial chemical interactions for efficient and stable perovskite solar cells10.1016/j.nanoen.2022.107747 ↗
16. Suppressed recombination for monolithic inorganic perovskite/silicon tandem solar cells with an approximate efficiency of 23%10.1016/j.esci.2022.04.001 ↗
17. Multifunctional polymer framework modified SnO2 enabling a photostable α-FAPbI3 perovskite solar cell with efficiency exceeding 23%10.1021/acsenergylett.1c01763 ↗
18. Simultaneous interfacial modification and crystallization control by biguanide hydrochloride for stable perovskite solar cells with PCE of 24.4%10.1002/adma.202106118 ↗
19. Electrical and optical study of ITO films on glass and polymer substrates prepared by DC magnetron sputtering type negative metal ion beam deposition10.1016/j.matchemphys.2007.08.015 ↗
20. Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substrates10.1016/j.tsf.2004.11.040 ↗
21. SnO2-based electron transporting layer materials for perovskite solar cells: a review of recent progress10.1016/j.jechem.2018.11.011 ↗
22. Moth eye‐inspired highly efficient, robust, and neutral‐colored semitransparent perovskite solar cells for building‐integrated photovoltaics10.1002/eom2.12117 ↗
23. Efficiency improvement of CIGS solar cells using RF sputtered TCO/Ag/TCO thin-film as prospective buffer layer10.1016/j.ceramint.2022.03.298 ↗
24. Performance assessment of TCO/metal/TCO multilayer transparent electrodes: from design concept to optimization10.1007/s10825-020-01459-9 ↗
25. Highly efficient and stable flexible perovskite solar cells enabled by using plasma-polymerized-fluorocarbon antireflection layer10.1016/j.nanoen.2020.105737 ↗
26. Near 90% transparent ITO‐based flexible electrode with double‐sided antireflection layers for highly efficient flexible optoelectronic devices10.1002/smll.202201716 ↗
27. Polymer-metal hybrid transparent electrodes for flexible electronics10.1038/ncomms7503 ↗
28. Nanoparticle stacks with graded refractive indices enhance the omnidirectional light harvesting of solar cells and the light extraction of light‐emitting diodes10.1002/adfm.201201949 ↗
29. Broadband antireflective and superhydrophobic coatings for solar cells10.1016/j.mtener.2019.03.006 ↗
30. Semitransparent and flexible perovskite solar cell with high visible transmittance based on ultrathin metallic electrodes10.1364/OL.42.001958 ↗
31. Preparation of high refractive index composite films based on titanium oxide nanoparticles hybridized hydrophilic polymers10.3390/nano9040514 ↗
32. Polymers doped with metal oxide nanoparticles with controlled refractive index10.14314/polimery.2007.679 ↗
33. Enhanced photovoltage for inverted planar heterojunction perovskite solar cells10.1126/science.aap9282 ↗
34. Structure of organometal halide perovskite films as determined with grazing‐incidence x‐ray scattering methods10.1002/aenm.201700131 ↗
35. Toward tailored film morphologies: the origin of crystal orientation in hybrid perovskite thin films10.1002/admi.201600403 ↗
36. Amino‐linked conjugated tetrazole ring passivation strategy for air‐processed perovskite cells with predominant stability and efficiency10.1002/cssc.202101965 ↗
37. Enhanced efficiency and stability of planar perovskite solar cells using SnO2: InCl3 electron transport layer through synergetic doping and passivation approaches10.1016/j.cej.2020.127997 ↗
38. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
39. β-Alanine-anchored SnO2 inducing facet orientation for high-efficiency perovskite solar cells10.1021/acsami.1c17260 ↗
40. Bifunctional surface engineering on SnO2 reduces energy loss in perovskite solar cells10.1021/acsenergylett.0c01566 ↗
41. Modifying SnO2 with polyacrylamide to enhance the performance of perovskite solar cells10.1021/acsami.2c08662 ↗
42. High‐performance thickness insensitive perovskite solar cells with enhanced moisture stability10.1002/aenm.201800438 ↗
43. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO210.1038/s41467-018-05760-x ↗
44. Precursor engineering of the electron transport layer for application in high‐performance perovskite solar cells10.1002/advs.202102845 ↗
45. High-efficiency planar heterojunction perovskite solar cell produced by using 4-morpholine ethane sulfonic acid sodium salt doped SnO210.1016/j.jcis.2021.11.051 ↗
46. In situ perovskitoid engineering at SnO2 interface toward highly efficient and stable formamidinium lead triiodide perovskite solar cells10.1021/acs.jpclett.1c03002 ↗
47. Eco-friendly fabrication of transparent superhydrophobic coating with excellent mechanical robustness, chemical stability, and long-term outdoor durability10.1021/acs.langmuir.2c01998 ↗
48. Strong mechanical and durable superhydrophobic photothermal MWCNTs/SiO2/PDMS/PVDF composite coating for anti-icing and de-icing
49. Strategic improvement of the long-term stability of perovskite materials and perovskite solar cells10.1039/C6CP04553G ↗