journal article·2016-04

Structure and electric properties of Li-modified (K0.48Na0.52)NbO3-0.015CuO lead-free piezoceramics

Chen Chen, Yanqiu Huang, Yanfeng Tan, Yunwei Sheng

Publisher page

Abstract

Abstract The effects of lithium on the structure and electrical properties of (K0.48Na0.52)1-xLixNbO3-0.015CuO lead-free piezoelectric ceramics were investigated. The addition of Li led to a decrease in the orthorhombic–tetragonal phase transition temperature (TO-T) of the ceramics, and the coexistence of the orthorhombic and tetragonal phases was formed in the ceramics with 0.05 ≤ x ≤ 0.08 at room temperature. The secondary phase K3Li2Nb5O15 was detected when x ≥ 0.03, showing that the lithium solubility limit in KNN–Cu-xLi ceramics was lower than that in Cu-free systems. The relatively large leakage current in the ceramics with high Li content was induced by the defects derived from the formation of K3Li2Nb5O15, which led to the creation of the A-site vacancies and the oxygen vacancies because of the deficiency of A-site ions. The internal bias field (Ei) and the ferroelectric and piezoelectric properties of the ceramics were affected obviously by the increase of the defect concentration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. (K, Na)NbO3-based lead-free piezoceramics: fundamental aspects, processing technologies, and remaining challenges10.1111/jace.12715 ↗
2. Potassium-sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries10.1021/cr5006809 ↗
3. Phase transitional behavior and piezoelectric properties of (Na0.5K0.5)NbO3-LiNbO3 ceramics10.1063/1.1813636 ↗
4. Analysis of crystallographic evolution in (Na,K)NbO3-based lead-free piezoceramics by x-ray diffraction10.1063/1.2825280 ↗
5. High piezoelectric d33 coefficient in Li-modified lead-free (Na, K) NbO3 ceramics sintered at optimal temperature10.1063/1.2748088 ↗
6. The microstructure and ferroelectric properties of (K0.5Na0.5)NbO3–LiNbO3 lead-free piezoelectric ceramics10.1016/j.mseb.2006.09.031 ↗
7. Hoffmann · 2012 · 209
8. Investigation of CuO-Doped NKN Ceramics with high mechanical quality factor synthesized by a B-site oxide precursor method10.1111/j.1551-2916.2011.04903.x ↗
9. Effect of Li substitution on the piezoelectric properties of potassium sodium niobate ceramics10.1143/JJAP.44.6136 ↗
10. Temperature dependent properties and poling effect of K4CuNb8O23 modified (Na0.5K0.5)NbO3 lead free piezoceramics10.1063/1.4916076 ↗
11. Piezoelectric properties and hardening behavior of K5.4Cu1.3Ta10O29-doped K0.5Na0.5NbO3 ceramics10.1063/1.2896588 ↗
12. Low-temperature sintering and piezoelectric properties of CuO-added KNbO3 ceramics10.1111/jace.13225 ↗
13. The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO10.1016/j.ceramint.2013.10.019 ↗
14. Differences between copper-oxide- and zinc-oxide-doped sodium potassium niobate ceramics10.1111/j.1551-2916.2012.05246.x ↗
15. Processing and piezoelectric properties of (Na0.5K0.5)0.96Li0.04(Ta0.1Nb0.9)1−xCuxO3−3x/2 lead-free ceramics10.1111/j.1551-2916.2007.02206.x ↗
16. Dielectric and piezoelectric properties of Cu2+-doped alkali niobates10.1016/j.jeurceramsoc.2009.01.003 ↗
17. Enhancement of Qm in CuO-doped compositionally optimized Li/Ta-modified (Na,K)NbO3 lead-free piezoceramics10.1016/j.ceramint.2011.04.113 ↗
18. Studying the roles of Cu and Sb in K0.48Na0.52NbO3 lead-free piezoelectric ceramics10.1016/j.jallcom.2015.03.223 ↗
19. Effects of Li on electrical properties of (K0.47Na0.53)1-xLixNb0.94Sb0.06O3 lead-free ceramics10.1002/pssa.201127183 ↗
20. Temperature dependence on the piezoelectric property of (1-x)(Na0.5K0.5)NbO3-xLiNbO3 ceramics10.1016/j.jeurceramsoc.2007.02.103 ↗
21. Combined effects of Li content and sintering temperature on polymorphic phase boundary and electrical properties of Li/Ta co-doped (Na, K) NbO3 lead-free piezoceramics10.1007/s00339-009-5358-0 ↗
22. Local variations in defect polarization and covalent bonding in ferroelectric Cu2+-doped PZT and KNN functional ceramics at the morphotropic phase boundary10.1039/b905642d ↗
23. Formation of vacancies and copper substitutionals in potassium sodium niobate under various processing conditions10.1103/PhysRevB.81.174115 ↗
24. Ionized oxygen vacancy-related electrical conductivity in (Pb1− xLax)(Zr0. 90Ti0. 10) 1− x/4O3 ceramics10.1088/0022-3727/41/21/215503 ↗
25. Peláiz-Barranco · 2010 · 165
26. Investigation of the structure and phase transitions in the novel A-site substituted distorted perovskite compound Na0.5Bi0.5TiO310.1107/S0108768101020845 ↗
27. Lithium-induced phase transitions in lead-free Bi0.5Na0.5TiO3 based ceramics10.1021/jp500609h ↗
28. Phase transitions in sodium niobate-potassium niobate solid solutions10.1080/00150197408237958 ↗
29. Structural phase-transitions in sodium–potassium niobate solid-solutions by neutron powder diffraction10.1107/S056773947800056X ↗
30. Erünal · 2009
31. Effects of impurity doping in lead zirconate-titanate ceramics10.1080/00150198208210617 ↗
32. Domain engineering of lead-free Li-modified (K,Na)NbO3 polycrystals with highly enhanced piezoelectricity10.1002/adfm.201000284 ↗
33. Crystallographic properties of four-fold grain K3Li2Nb5O15 thin films10.1016/j.tsf.2003.09.069 ↗
34. Growth and properties of ferroelectric potassium lithium niobate (KLN) crystal grown by the czochralski method10.1016/S0022-0248(01)00609-1 ↗
35. Characterization of potassium lithium niobate (KLN) ceramic system10.1016/j.jallcom.2007.09.038 ↗
36. Elastic and piezoelectric properties of potassium lithium niobate (KLN) crystals10.1143/JJAP.17.1969 ↗