Flexible PVDF/BST nanocomposites for mechanical energy harvesting application
Source abstract
Abstract
The development of a piezoelectric generator (PEG) that exhibits improved durability, stability, and enhanced output performance continues to be a crucial objective for self-powered and wearable electronic devices. In this study, a PEG was constructed using nanocomposite films composed of sol-gel derived Barium Strontium Titanate (BST) filler embedded within a Polyvinylidene fluoride (PVDF) matrix. This flexible polymer matrix structure is selected for its exceptional performance, flexibility, and cost-efficiency, making it ideal for advanced piezoelectric applications. Homogeneous nanocomposite films of PVDF-BST with different proportions of BST were fabricated using the solution casting method. Integrating BST filler into the PVDF matrix significantly enhances the nucleation of the electroactive β-phase, thereby improving the dielectric and ferroelectric properties, which vary according to the volume fraction of BST used. Specifically, the PVDF-BST composite containing 10 % BST (PB10) exhibited the highest electroactive β-phase content at 41.8 %, and demonstrated an energy storage density of 0.8 J/cm³ with an efficiency of 73.9 %. The dielectric constant at room temperature is seen to rise from 23 in pure PVDF to 132 in the PB20 composition at 1 kHz. The open-circuit voltage (V oc) of the PEG was recorded by exerting a periodic force on its surface. Notably, the PB10 variant achieved the highest peak-to-peak open-circuit voltage, reaching 28 V. Additionally, PB10 produced an open-circuit voltage of 22 V in response to finger tapping, highlighting its suitability for applications in touch and pressure sensing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Innovative Energy Harvesting Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Micro-scale energy harvesting devices: review of methodological performances in the last decade10.1016/j.rser.2015.10.046 ↗
2. Energy harvesting technologies for achieving self-powered wireless sensor networks in machine condition monitoring: a review10.3390/s18124113 ↗
3. Harvesting ambient environmental energy for wireless sensor networks: a survey
4. Nature Driven Bio-Piezoelectric/triboelectric nanogenerator as next-generation green energy harvester for smart and pollution free society
5. A flexible piezoelectric pressure sensor based on PVDF nanocomposite fibers doped with PZT particles for energy harvesting applications10.1016/j.ceramint.2020.03.210 ↗
6. Flexible vibrational energy harvesting devices using strain-engineered perovskite piezoelectric thin films10.1016/j.nanoen.2018.10.068 ↗
7. A novel adaptive control method for a class of stochastic switched pure feedback systems10.1016/j.neucom.2019.06.061 ↗
8. Ceramic-Based Polymer Nanocomposites as Piezoelectric Materials
9. Intensifying energy density, dielectric and mechanical properties of electroactive β-PVDF/f-BTO nanocomposites10.1016/j.physb.2019.06.064 ↗
10. Evaluation of (Na1/2Bi1/2)TiO3/PVDF Piezocomposites for mechanical energy harvesting10.1016/j.solidstatesciences.2021.106729 ↗
11. Sponge-like piezoelectric polymer films for scalable and integratable nanogenerators and self-powered electronic systems10.1002/aenm.201301624 ↗
12. The effect of Ba/Sr ratio on the Curie temperature for ferroelectric barium strontium titanate ceramics10.1142/S2010135X20500216 ↗
13. Fabrication, structure, and frequency-dependent electrical and dielectric properties of Sr-doped BaTiO3 ceramics10.1016/j.ceramint.2019.09.208 ↗
14. Flexible lead-free NBT-BT/PVDF composite films by hot pressing for low-energy harvesting and storage10.1016/j.jallcom.2021.161071 ↗
15. The negative piezoelectric effect of the ferroelectric polymer poly(vinylidene fluoride)10.1038/nmat4423 ↗
16. Flexible nanogenerators for energy harvesting and self-powered electronics10.1002/adma.201504299 ↗
17. Energy Harvesting at the Human Body
18. Piezoelectric nanofibers for energy scavenging applications10.1016/j.nanoen.2012.02.003 ↗
19. Self-polarized electrospun polyvinylidene fluoride (PVDF) nanofiber for sensing applications10.1016/j.compositesb.2018.10.011 ↗
20. Robust mechanical-to-electrical energy conversion from short-distance electrospun poly(vinylidene fluoride) fiber webs10.1021/acsami.5b06863 ↗
21. Ferroelectric polymers exhibiting negative longitudinal piezoelectric coefficient: progress and prospects
22. Study on relaxor polymer interface matrix for piezoelectric nanocomposite generators10.1016/j.apsusc.2022.156031 ↗
23. Polarization structural design in core–shell fillers: an approach to significantly enhance the energy storage properties of BST/PVDF composite films10.1021/acsaelm.2c00307 ↗
24. Ultra strong flexible Ba0.7Sr0.3Zr0.02Ti0.98O3/MWCNT/PVDF nanocomposites: pioneering material with remarkable energy storage for Self-Powered devices10.1016/j.cej.2024.151014 ↗
25. Synthesis and electrical characterization of cold sintered Ba0.7Sr0.3TiO3–PVDF ceramic nanocomposites for capacitive energy storage applications10.1007/s10854-023-11358-x ↗
26. Na,K)NbO3 nanoparticle-embedded piezoelectric nanofiber composites for flexible nanogenerators10.1016/j.compscitech.2015.02.015 ↗
27. Organo-lead halide perovskite induced electroactive β-phase in Porous PVDF films: an excellent material for photoactive piezoelectric energy harvester and photodetector10.1021/acsami.7b17408 ↗
28. Highly-flexible piezoelectric nanogenerators with silver nanowires and barium titanate embedded composite films for mechanical energy harvesting10.1016/j.apenergy.2018.09.009 ↗
29. Flexible PVDF based piezoelectric nanogenerators10.1016/j.nanoen.2020.105251 ↗
30. Enhanced dielectric tunability and energy storage density of sandwich-structured Ba0.6Sr0.4TiO3/PVDF composites10.1016/j.matlet.2021.130910 ↗
31. Preparation and dielectric properties of poly(vinylidene fluoride)/Ba0.6Sr0.4TiO3 composites10.1016/j.jallcom.2014.09.005 ↗
32. Polyvinylidene fluoride-added ceramic powder composite near-field electrospinned piezoelectric fiber-based low-frequency dynamic sensors10.1021/acsomega.0c00805 ↗
33. The piezoelectric response of electrospun PVDF nanofibers with graphene oxide, graphene, and halloysite nanofillers: a comparative study10.1007/s10854-017-7491-4 ↗
34. Vibrational spectrum of PVDF and its interpretation10.1016/j.polymertesting.2004.04.001 ↗
35. Characterization of PVDF membranes by vibrational spectroscopy10.1016/S0376-7388(02)00407-6 ↗
36. FTIR AND DSC STUDIES OF MECHANICALLY DEFORMED β-PVDF FILMS10.1081/MB-100106174 ↗
37. Electroactive phases of poly(vinylidene fluoride): determination, processing and applications10.1016/j.progpolymsci.2013.07.006 ↗
38. Investigation of the electroactive phase content and dielectric behaviour of mechanically stretched PVDF-GO and PVDF-rGO composites10.1016/j.materresbull.2019.110732 ↗
39. Development of multiferroic polymer nanocomposite from PVDF and (Bi0.5Ba0.25Sr0.25)(Fe0.5Ti0.5)O310.1007/s10854-016-5834-1 ↗
40. Superior energy storage performance of PVDF-based composites induced by a novel nanotube structural BST@SiO2 filler10.1016/j.compositesa.2021.106375 ↗
41. Advantages and limitations of active phase silanization in PVDF composites: Focus on electrical properties and energy harvesting potential10.1002/pc.28071 ↗
42. High-Energy Storage Density and Efficiency of (1− x)[0.94 NBT–0.06 BT]– x ST Lead-Free Ceramics10.1002/ente.201500173 ↗
43. Enhanced dielectric properties and energy storage density of PVDF nanocomposites by co-loading of BaTiO3 and CoFe2O4 nanoparticles10.1007/s42114-020-00138-4 ↗
44. Significantly enhanced dielectric property in PVDF nanocomposites flexible films through a small loading of surface-hydroxylated Ba 0.6 Sr 0.4 TiO 3 nanotubes10.1039/C4TA04051A ↗
45. Investigation on the optical and transport properties of PVA/Ag incorporated ZnO nanocomposites for optoelectronic and electronic device application10.1007/s00289-023-04944-w ↗
46. Structure and dielectric properties of Dy-BST/PVDF nanocomposites10.1007/s10854-023-10253-9 ↗
47. Effect of hot press temperature on β -phase, dielectric and ferroelectric properties of solvent casted Poly(vinyledene fluoride) films10.1088/2053-1591/ab2d85 ↗
48. The effect of fibre concentration on the α to β-phase transformation, degree of crystallinity and electrical properties of vapour grown carbon nanofibre/poly(vinylidene fluoride) composites10.1016/j.carbon.2009.05.011 ↗
49. Enhancement of electroactive β phase crystallization and dielectric constant of PVDF by incorporating GeO 2 and SiO 2 nanoparticles10.1039/C5CP03975D ↗
50. Superior Energy Storage Performances of Polymer Nanocomposites via Modification of Filler/Polymer Interfaces
51. Superior performances of in situ synthesized ZnO/PVDF thin film based self-poled piezoelectric nanogenerator and self-charged photo-power bank with high durability10.1016/j.nanoen.2017.11.065 ↗
52. Flexible piezoelectric nanogenerator made of poly(vinylidenefluoride-co-trifluoroethylene) (PVDF-TrFE) thin film10.1016/j.nanoen.2014.04.016 ↗
53. Rich lamellar crystal baklava-structured PZT/PVDF piezoelectric sensor toward individual table tennis training10.1016/j.nanoen.2019.03.013 ↗
54. 2D SnO2 nanosheet/PVDF composite based flexible, self-cleaning piezoelectric energy harvester10.1016/j.enconman.2019.01.073 ↗
55. Fabrication and characterization of highly efficient flexible energy harvesters using PVDF–graphene nanocomposites10.1088/0964-1726/22/8/085017 ↗
56. Hemispherically Aggregated BaTiO 3 Nanoparticle Composite Thin Film for High-Performance Flexible Piezoelectric Nanogenerator10.1021/nn406481k ↗
57. Incorporation of ZnO encapsulated MoS2 to fabricate flexible piezoelectric nanogenerator and sensor10.1016/j.nanoen.2022.107635 ↗
58. High-Performance Flexible Piezoelectric Nanogenerator Based on Electrospun PVDF-BaTiO 3 Nanofibers for Self-Powered Vibration Sensing Applications10.1021/acsami.2c07911 ↗
59. LiTaO 3 -Based Flexible Piezoelectric Nanogenerators for Mechanical Energy Harvesting10.1021/acsami.1c10116 ↗
60. Synthesis of KNN nanoblocks through surfactant-assisted hot injection method and fabrication of flexible piezoelectric nanogenerator based on KNN-PVDF nanocomposite
61. Enhanced Flexible Poly(vinylidene fluoride-trifluorethylene) Piezoelectric Nanogenerators by SnSe Nanosheet Doping and Solvent Treatment10.1021/acsami.1c08347 ↗