journal article·2024-02

The preparation of CuO film under different annealing atmospheres and investigation of the excellent electrical and undoped tunable electroluminescence characteristics of Au/i-CuO/n-GaN LED

Xian Zhang, Guojiao Xiang, Jinming Zhang, Zhiang Yue, Yue Liu, Jiahui Zhang, Jiaxin Liu, Wenwen Jin, Jingwen Shu, Lukai Wang, Hangyu He, Hui Wang, Yang Zhao

Publisher page

Abstract

Copper oxide (CuO) film is widely used in optoelectronic devices. The CuO films were fabricated by radio frequency (RF) magnetron sputtering and then annealed at 700 °C under different atmospheres (unannealed, O 2, N 2 , vacuum). The physical characteristics of the films were analyzed systematically. In addition, we prepared Au/i-CuO/n-GaN metal-insulator-semiconductor (MIS) structure devices using optimized conditions. The devices had excellent rectifying characteristics at different ambient temperatures and the turn-on voltage was about 1.7 V. The working mechanism of the diode was analyzed through electroluminescence (EL) spectra and band structure. The EL spectra observed at positive and negative bias were compounded by holes and electrons on the gold electrode passing through the insulating layer into the n-GaN side. The EL spectra exhibited that a dominant ultraviolet (UV) emission peak at ∼376 nm was observed under forward bias (FB), and a strong near-white light emission peak at ∼530 nm was observed under reverse bias (RB). The device exhibited unique electroluminescent spectra tunability varying with bias conditions. The chrominance coordinate of the device under RB was (0.3067,0.3604), and the color temperature was 6585 K. This study proved the application potential of i-CuO as an insulating layer in the preparation of new reference for MIS structured GaN-based tunable light-emitting diodes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Impact of plasma electron flux on plasma damage-free sputtering of ultrathin tin-doped indium oxide contact layer on p-GaN for InGaN/GaN light-emitting diodes10.1002/advs.201700637 ↗
2. A. Krost, A. Dadgar, GaN-Based Devices on Si, physica status solidi (a) 194(2) (2002) 361–375, https://doi.org/10.1002/1521–396X(200212)194:23.0.CO;2-R.10.1002/1521-396X(200212)194:2<361::AID-PSSA361>3.0.CO;2-R ↗
3. Wide-bandgap semiconductor ultraviolet photodetectors10.1088/0268-1242/18/4/201 ↗
4. Enhanced luminescence property of InGaN/GaN nanorod array light emitting diode
5. Actively tunable broadband terahertz absorption using periodically square-patterned graphene10.7567/APEX.11.102201 ↗
6. Broadband incoherent four-wave mixing and 27 dB idler conversion efficiency using ultra-silicon rich nitride devices10.1063/1.5010841 ↗
7. Solution-processed novel core–shell n–p heterojunction and its ultrafast UV photodetection properties10.1039/c2ra21518g ↗
8. High conductivity along with high visible light transparency in Al implanted sol-gel ZnO thin film with an elevated figure of merit value as a transparent conducting layer10.1016/j.jallcom.2020.155221 ↗
9. Fe-doped p-ZnO nanostructures/n-GaN heterojunction for “blue-free” orange light-emitting diodes10.1002/adom.201700146 ↗
10. Tunable white emission of silver-sulfur-zeolites as single-phase LED phosphors10.1088/2050-6120/ab7169 ↗
11. Graphene/SiO2/p-GaN diodes: an advanced economical alternative for electrically tunable light emitters10.1002/adfm.201203035 ↗
12. Color-tunablility in GaN LEDs based on atomic emission manipulation under current injection10.1021/acsphotonics.8b01461 ↗
13. Germanium/perovskite heterostructure for high-performance and broadband photodetector from visible to infrared telecommunication band10.1038/s41377-019-0218-y ↗
14. Controlled growth and characteristics of single-phase Cu2O and CuO films by pulsed laser deposition10.1016/j.vacuum.2008.10.003 ↗
15. Rapid thermal annealing assisted stability and efficiency enhancement in a sputter deposited CuO photocathode10.1039/C6RA03383K ↗
16. Controllably annealed CuO-nanoparticle modified ITO electrodes: characterisation and electrochemical studies10.1016/j.apsusc.2016.08.159 ↗
17. Annealing temperature induced physical characteristics of CuO films grown by magnetron sputtering10.1016/j.mssp.2021.105883 ↗
18. Effects of oxygen flow rates on the physical characteristics of magnetron sputtered CuO films10.1016/j.vacuum.2019.108811 ↗
19. Different annealing atmosphere gases on the growth and photocurrent performance of CuO films grown on FTO substrate10.1021/acsomega.8b01529 ↗
20. In-situ annealing characterization of atomic-layer-deposited Al2O3 in N2, H2 and vacuum atmospheres10.1016/j.tsf.2019.03.010 ↗
21. Near-white light-emitting diode from p-CuO/n-GaN heterojunction with an i-CuO electron blocking layer10.1016/j.jallcom.2021.159145 ↗
22. Reproducible bipolar resistive switching in entire nitride AlN/n-GaN metal-insulator-semiconductor device and its mechanism10.1063/1.4901747 ↗
23. In-situ synthesis of Cu(OH)2 and CuO nanowire electrocatalysts for methanol electro-oxidation10.1016/j.matlet.2016.10.079 ↗
24. Cuprous oxide thin films obtained by dip-coating method using rapid thermal annealing treatments10.1016/j.mssp.2017.06.017 ↗
25. Photofacilitated Controllable Growth of ZnO Films Using Photoassisted Metal Organic Chemical Vapor Deposition10.1021/cg300609f ↗
26. Investigation of sputtering pressure on physical properties of CuO films and the electrical properties-temperature relationship of CuO films and p-CuO/n-GaN heterojunction10.1016/j.mssp.2022.107082 ↗
27. Preparation of CuO films at different sputtering powers and the effect of operating temperatures on the photovoltaic characteristics of p-CuO/n-Si heterojunction10.1016/j.vacuum.2022.111769 ↗
28. Effect of annealing temperature on the properties and photocatalytic efficiencies of ZnO nanoparticles10.1016/j.jallcom.2015.04.236 ↗
29. Heteroepitaxy, polymorphism, and faulting in GaN thin films on silicon and sapphire substrates10.1063/1.354414 ↗
30. Texture coefficient and band gap tailoring of Fe-doped SnO2 nanoparticles via thermal spray pyrolysis10.1007/s12598-019-01278-3 ↗
31. Texture evolution of vanadium nitride thin films10.1016/j.tsf.2019.137415 ↗
32. Synthesis of Cu2O from CuO thin films: optical and electrical properties10.1063/1.4919323 ↗
33. Strain control of Urbach energy in Cr-doped PrFeO310.1007/s00339-017-1186-9 ↗
34. Absorption edge, urbach tail, and electron-phonon interactions in topological insulator Bi2Se3 and band insulator (Bi0.89In0.11)2Se310.1063/1.5080790 ↗
35. Band gap energy and Urbach tail studies of amorphous, partially crystalline and polycrystalline tin dioxide10.1016/0040-6090(85)90092-6 ↗
36. Photocarrier generation in CuxO thin films deposited by radio frequency sputtering10.1063/1.4788680 ↗
37. Effect of Cu addition on the properties of the RF magnetron-sputtered Cu2O thin films10.1007/s10832-021-00234-x ↗
38. p-ZnO/n-Si heterojunction: Sol-gel fabrication, photoresponse properties, and transport mechanism10.1063/1.2937124 ↗
39. Physical mechanisms in double-carrier trap-charge limited transport processes in organic electroluminescent devices: A numerical study10.1063/1.367942 ↗
40. Temperature dependent electrical properties of AlN/Si heterojunction10.1063/1.5036932 ↗
41. High-efficiency and air-stable perovskite quantum dots light-emitting diodes with an all-inorganic heterostructure10.1021/acs.nanolett.6b04116 ↗
42. Excellent electroluminescence and electrical characteristics from p-CuO/i-Ga2O3/n-GaN light-emitting diode prepared by magnetron sputtering10.1016/j.jlumin.2021.118621 ↗
43. Temperature-dependent Schottky barrier parameters of Ni/Au on n-type (001) β-Ga2O3 Schottky barrier diode10.1016/j.vacuum.2019.109012 ↗
44. Analysis of the temperature-dependent current–voltage characteristics and the barrier-height inhomogeneities of Au/GaN Schottky diodes10.1002/pssa.201228237 ↗
45. Ultraflexible and transparent MoS2/β-Ga2O3 heterojunction-based photodiode with enhanced photoresponse by piezo-phototronic effect10.1021/acsaelm.3c00120 ↗
46. "Blue-free" orange ZnO-related light-emitting diode based on a natural interface layer of Ga2O3 and ZnGa2O410.1364/OL.493700 ↗
47. Rectification properties of nanocrystalline diamond/silicon p-n heterojunction diodes10.1063/1.4819385 ↗
48. Air-stable all inorganic green perovskite light emitting diodes based on ZnO/CsPbBr3/NiO heterojunction structure10.1016/j.ceramint.2017.12.048 ↗
49. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
50. Epitaxial growth of vertically aligned ZnO nanowires for bidirectional direct-current driven light-emitting diodes applications10.1039/C4CE01788A ↗
51. The electroluminescent properties based on bias polarity of the epitaxial graphene/aluminium SiC junction10.1088/1361-6463/aac7d2 ↗
52. Observation of 430 nm electroluminescence from ZnO/GaN heterojunction light-emitting diodes10.1063/1.1615308 ↗
53. Optimization of growth parameters of AlN thin films and investigation of electrical and electroluminescence characteristics from Au/i-AlN/n-GaN UV light-emitting diode10.1016/j.optlastec.2022.108470 ↗
54. On pre-breakdown phenomena in insulators and electronic semi-conductors10.1103/PhysRev.54.647 ↗
55. Pro-environment Cu2O facilitate stable low-wastage ultraviolet p-CuxO/n-GaN LEDs with virtual electron blocking nanolayer10.1016/j.optlastec.2022.108063 ↗
56. Treatment of antibiotic-resistant bacteria by encapsulation of ZnO nanoparticles in an alginate biopolymer: Insights into treatment mechanisms10.1016/j.jhazmat.2019.03.072 ↗
57. The origin of the red emission in n-ZnO nanotubes/p-GaN white light emitting diodes10.1186/1556-276X-6-130 ↗
58. Theoretical study of Fe-doped p-type ZnO10.1063/1.3422486 ↗