journal article·2023-03

Probing into the physicochemical consequences of pristine and X0.06Ni0.94O (X = Co, Fe, Cu) nanoparticles for bactericidal, antifungal and hemolytic competency

A. Aslinjensipriya, R. Sylvia Reena, S. Grace Infantiya, R. Ragu, S. Jerome Das

Publisher page

Abstract

Nano-scaled transition metal oxides are massively gaining an exciting horizon of research interest among material scientists by triggering scientific attention due to its prime advancements in physico-chemical, magneto-optical, electro-chemical, bio-medical and bio-compatible characteristics. The current work highlights the fabrication and formalisation of pure and X 0.06Ni 0.94O (X = Co, Fe, Cu) nanoparticles via bottom-up sol-gel pathway employing citric acid as the gelling factor. The crystallite size evaluated from X-Ray Diffraction (XRD) analysis decreased with respect to doping were estimated by successive systems among which Halder-Wagner (H-W) and Wagner-Agua (W-A) approach delivered prime results. Fourier Transform Infra-Red (FTIR) spectroscopy analysis regulated at room temperature in the mid infrared frequency continuum 400–4000 cm −1 confirmed the cubic conformation and the presence of predicted functional groups in the as-synthesized nanoparticles. The bandgap energy calculated from Ultra Violet-visible (UV–vis) spectroscopy is found to decrease for Co-NiO and Cu-NiO nanoparticles and increased for Fe doped NiO nanoparticles in comparison with the bandgap of pure NPs reasoned out by the Burstein-Moss shift. The device dependent parameter Urbach energy, and other pivotal optical parameters crucial in the fabrication of optoelectronic devices were evaluated. Surface morphological features and porous network of doped nanoparticles were investigated from Scanning Electron Microscopy (SEM) technique. Energy Dispersive X-ray (EDX) spectra ascertained the molecular matrix array and elemental composition in synthesized samples. The surface area measured from Brunauer-Emmett-Teller (BET) analysis revealed higher surface area (42 m 2 / g ) for Fe-doped NiO nanoparticles than other counterparts. The thermal decomposition and stability of the pure and doped samples were analysed by Thermo-Gravimetric (TG) studies. The fundamental kinetic and thermodynamic parameters such as entropy, enthalpy, activation and Gibb’s free energy were elucidated through six different models viz., Coats-Redfern (CR), Piloyan-Novikava (PN), Horowitz-Metzger (HM), Van-Krevelen (VK), MacCallum-Tanner (MT) and Broido methods. Vibrating Sample Magnetometer (VSM) analysis coupled with the Law of Approach to Saturation (LAS) operandi extracted two critical magnetic criteria and the saturation magnetization is noticed to reduce with doping. The antibacterial and antifungal efficacies of the as-synthesized NPs were deeply discussed by portraying the nanoparticles-microbes interface. Iron and copper doped nickel oxide nanoparticles encountered favorable antimicrobial activity against pathogenic organisms. Furthermore, the bio-compatibility nature of the NPs was examined through hemolytic activity and the samples exhibited non-toxic behavior towards human cells till 50 μ g / ml .
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · Transition Metal Oxide Nanomaterials · Magnetic Properties and Synthesis of Ferrites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (91)

Show source-provided references
1. Green synthesis of zinc oxide nanoparticles using Phoenix dactylifera waste as bioreductant for effective dye degradation and antibacterial performance in wastewater treatment10.1016/j.jhazmat.2020.123560 ↗
2. Rapid decline of neutralizing antibodies against SARS-CoV-2 among infected healthcare workers
3. Infectious disease threats in the twenty-first century: strengthening the global response10.3389/fimmu.2019.00549 ↗
4. Nanotechnology approaches for global infectious diseases10.1038/s41565-021-00866-8 ↗
5. Combatting antibiotic-resistant bacteria using nanomaterials10.1039/C7CS00748E ↗
6. Eco-friendly mycogenic synthesis of ZnO and CuO nanoparticles for in vitro antibacterial, antibiofilm, and antifungal applications10.1007/s12011-020-02369-4 ↗
7. Plant‐mediated synthesis of nanoparticles and their antimicrobial activity against phytopathogens10.1002/jsfa.10767 ↗
8. Effects of ZnO nanoparticles on Phaseolus vulgaris germination and seedling development determined by X-ray spectroscopy10.1021/acsanm.8b01619 ↗
9. Self-coupled nickel sulfide@ nickel vanadium sulfide nanostructure as a novel high capacity electrode material for supercapattery10.1016/j.apsusc.2019.143778 ↗
10. Facile solid-state synthesis and study in vitro of the antibacterial activity of NiO and NiFe2O4 nanoparticles10.1016/j.mtla.2020.100955 ↗
11. Comprehensive review of the morphological, linear and nonlinear optical characterization of spin-coated NiO thin films for optoelectronic applications10.1016/j.optmat.2021.111294 ↗
12. A facile microwave route for fabrication of NiO/rGO hybrid sensor with efficient CO2 and acetone gas sensing performance using clad modified fiber optic method10.1016/j.ijleo.2020.165970 ↗
13. Triple-shell NiO hollow sphere for p-type dye-sensitized solar cell with superior light harvesting10.1016/j.solener.2021.01.026 ↗
14. Engineering thermally activated NiMoO4 nanoflowers and biowaste derived activated carbon-based electrodes for high-performance supercapatteries10.1039/C9QI01085H ↗
15. Fabrication of 3D NiO-YSZ structures for enhanced performance of solid oxide fuel cells and electrolysers10.1016/j.elecom.2022.107260 ↗
16. Photoelectrochemical hydrogen generation employing a Cu2O-based photocathode with improved stability and activity by using NixPy as the cocatalyst10.1039/C7CP08560E ↗
17. Nanoporous NiO@ SiO2 photo-catalyst prepared by ion-exchange method for fast elimination of reactive dyes from wastewater
18. Conducting polymer based visible light photocatalytic composites for pollutant removal: Progress and prospects
19. Gas sensing performance of sprayed NiO thin films toward NO2 gas10.1016/j.jallcom.2021.160908 ↗
20. Bi-functional NiO-ZnO nanocomposite: Synthesis, characterization, antibacterial and photo assisted degradation study10.1016/j.apt.2020.11.022 ↗
21. Antimicrobial and antifungal properties of NiCu-PANI/PVA quaternary nanocomposite synthesized by chemical oxidative polymerization of polyaniline10.1016/j.chemosphere.2021.132696 ↗
22. Optical properties of NiO and CoO10.1103/PhysRevB.2.2182 ↗
23. Structural, Third Order Nonlinear and Magnetic Properties of Pristine and Ni-doped CuO nanoparticles: Diluted Magnetic Semiconductors
24. Tailoring of magnetic anisotropy by ion irradiation for magnetic tunnel junction sensors10.1016/j.jallcom.2022.164902 ↗
25. Efficient heat batteries for performance boosting in solar thermal cooking module10.1016/j.jclepro.2021.129223 ↗
26. In-field critical behavior and magnetocaloric effect in Ni5Al3/NiO nanoparticle compacts10.1016/j.jallcom.2021.159388 ↗
27. Surface-spin driven room temperature magnetic memory effect in Fe-substituted NiO nanoparticles10.1016/j.apsusc.2020.147856 ↗
28. Fe–Co co-doping effects on antiferromagnetic core of NiO nanoparticles10.1016/j.ceramint.2021.10.120 ↗
29. Green mediated NiO nano-rods using Phoenix dactylifera (Dates) extract for biomedical and environmental applications10.1016/j.matchemphys.2019.122419 ↗
30. NiO coupled CdO nanoparticles with enhanced magnetic and antifungal Properties10.1016/j.surfin.2019.02.002 ↗
31. Synthesis and characterization of NiO-CdO composite materials towards photoconductive and antibacterial applications10.1016/j.matchemphys.2018.01.048 ↗
32. NiO nanodisks: Highly efficient visible-light driven photocatalyst, potential scaffold for seed germination of Vigna radiata and antibacterial properties10.1016/j.jclepro.2018.04.110 ↗
33. Bio-waste eggshell membrane assisted synthesis of NiO/ZnO nanocomposite and its characterization: Evaluation of antibacterial and antifungal activity
34. Facile-synthesis and characterization of cobalt oxide (Co3O4) nanoparticles by using Arishta leaves assisted biological molecules and its antibacterial and antifungal activities10.1016/j.molstruc.2022.133065 ↗
35. Fabrication of biomass derived carbon supported iron oxide composites for antibacterial and antifungal activity10.1016/j.matlet.2022.131664 ↗
36. Bimetallic mixed metal oxide (CuO/NiO) in fusion with nitrogen-doped graphene oxide: An alternate approach for developing potential biocarrier10.1016/j.jece.2021.105781 ↗
37. Synthesis and characterization of iron oxide-hydroxyapatite-chitosan composite coating and its biological assessment for biomedical applications
38. M. Salami, M. H. Zarei, Comparative Toxic Effect of Bulk Copper Oxide (CuO) and CuO Nanoparticles on Human Red Blood Cells
39. Sageretia thea (Osbeck.) modulated biosynthesis of NiO nanoparticles and their in vitro pharmacognostic, antioxidant and cytotoxic potential. Artificial cells
40. Metal nanoparticles synthesis: An overview on methods of preparation, advantages and disadvantages, and applications
41. Structure and room-temperature ferromagnetism evolution of Sn and Mn-doped NiO synthesized by a sol-gel process10.1016/j.ceramint.2017.05.155 ↗
42. Synthesis and characterization of cobalt oxide nanoparticles by thermal treatment process10.1016/j.ica.2009.07.023 ↗
43. Evaluating anticancer activity of plant-mediated synthesized iron oxide nanoparticles using Punica granatum fruit peel extract10.1016/j.molstruc.2019.127539 ↗
44. Hollow Cu-doped NiO microspheres as anode materials with enhanced lithium storage performance10.1039/C9RA03780B ↗
45. Microstructural characterization and modified spectral response of cobalt doped NiO nanoparticles10.1016/j.matchemphys.2019.03.033 ↗
46. Enhanced photocatalytic activity of ferromagnetic Fe-doped NiO nanoparticles10.1016/j.ijleo.2019.163637 ↗
47. Synthesis, morphology, crystallite size and adsorption properties of nanostructured Mg–Zn ferrites with enhanced porous structure10.1016/j.jallcom.2019.152945 ↗
48. Zn doping induced enhancement of multifunctional properties in NiO nanoparticles10.1016/j.jallcom.2020.155050 ↗
49. Williamson-hall analysis in estimation of crystallite size and lattice strain in Bi1.34Fe0.66Nb1.34O6.35 prepared by the sol-gel method10.1016/j.mseb.2020.114830 ↗
50. Structural analysis and dielectric investigations of pure and rare earth elements (Y and Gd) doped NiO nanoparticles10.1016/j.jallcom.2019.153381 ↗
51. Synthesis and characterization of Zn-incorporated TiO2 thin films: impact of crystallite size on X-ray line broadening and bandgap tuning10.1007/s00339-019-3112-9 ↗
52. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
53. Structural, morphological and temperature-dependent electrical properties of BN/NiO nanocomposites
54. Synthesis and analysing the structural, optical, morphological, photocatalytic and magnetic properties of TiO2 and doped (Ni and Cu) TiO2 nanoparticles by sol–gel technique10.1007/s00339-019-2581-1 ↗
55. Effect of defect states in the optical and magnetic properties of nanocrystalline NiO synthesised in a single step by an aerosol process10.1016/j.ceramint.2019.11.014 ↗
56. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
57. Effect of Co doping in tailoring the crystallite size, surface morphology and optical band gap of CuO thin films prepared via thermal spray pyrolysis
58. Investigation on the structural and optical properties of copper doped NiO nanostructures thin films
59. Theory of electron band tails and the Urbach optical-absorption edge10.1103/PhysRevLett.57.1777 ↗
60. Exploring the Ce3+ ions doping effect on optical and magnetic properties of NiO nanostructures
61. Studies on cobalt doped NiO nanoparticles prepared by simple chemical method
62. CuxNi1−xO nanostructures and their nanocomposites with reduced graphene oxide: synthesis, characterization, and photocatalytic applications10.1016/j.ceramint.2020.09.209 ↗
63. Synthesis of mesoporous NiO/Bi2WO6 nanocomposite for selective oxidation of alcohols10.1016/j.solidstatesciences.2020.106306 ↗
64. Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—BET, BJH, and DFT. The10.1002/cjce.23632 ↗
65. NiO-based nanostructures with efficient optical and electrochemical properties for high-performance nanofluids10.1088/0957-4484/24/41/415705 ↗
66. Structural and electrical investigations of pure and rare earth (Er and Pr)-doped NiO nanoparticles10.1007/s00339-019-3247-8 ↗
67. Flame retardance and thermal degradation of new epoxy containing silicon and phosphorous hybrid ceramers prepared by the sol-gel method10.1016/S0141-3910(02)00060-5 ↗
68. Kinetic parameters from thermogravimetric data10.1038/201068a0 ↗
69. The evaluation of kinetic parameters from thermogravimetric data: comparison between established methods and the general analytical equation10.1016/0040-6031(93)80010-8 ↗
70. Growth and thermal kinetics of pure and cadmium doped barium phosphate single crystal10.1007/s10973-011-1365-4 ↗
71. A new analysis of thermogravimetric traces10.1021/ac60203a013 ↗
72. Isothermal and non-isothermal pyrolysis kinetics of Kapton® polyimide10.1016/j.polymdegradstab.2005.04.021 ↗
73. Analysis of coal spontaneous combustion by thermodynamic methods10.1080/00102202.2020.1734797 ↗
74. A simple, sensitive graphical method of treating thermogravimetric analysis data10.1002/pol.1969.160071012 ↗
75. Thermogravimetric analysis (TGA) of some synthesized metal oxide nanoparticles
76. Pseudocapacitance of Co doped NiO nanoparticles and its room temperature ferromagnetic behavior10.1016/j.physb.2017.10.106 ↗
77. Design and fabrication of iron-doped nickel oxide-based flexible electrode for high-performance energy storage applications10.1016/j.inoche.2021.108797 ↗
78. Magnetic and optical properties of electrodeposited nanospherical copper doped nickel oxide thin films10.1016/j.physe.2019.05.013 ↗
79. Bio-inspired iron oxide nanoparticles using Psidium guajava aqueous extract for antibacterial activity10.1007/s00339-019-3249-6 ↗
80. The law of approach to saturation in ferromagnets originating from the magnetocrystalline anisotropy10.1016/j.jmmm.2010.02.040 ↗
81. The crisis in antibiotic resistance10.1126/science.257.5073.1064 ↗
82. Antibacterial hybrid hydrogels10.1002/mabi.202000252 ↗
83. Green synthesis of Zirconium nanoparticles using Punica granatum (pomegranate) peel extract and their antimicrobial and antioxidant potency10.1016/j.envres.2022.112771 ↗
84. Bactericidal action and molecular docking studies of catalytic Cu-doped NiO composited with cellulose nanocrystals10.1016/j.ijbiomac.2021.12.038 ↗
85. Assessment of in vitro antimicrobial efficacy of biologically synthesized metal nanoparticles against pathogenic bacteria10.1016/j.chemosphere.2021.132676 ↗
86. Antimicrobial activities of biologically synthesized metal nanoparticles: an insight into the mechanism of action10.1007/s00775-019-01717-7 ↗
87. A review on current trends in the green synthesis of nickel oxide nanoparticles, characterizations, and their applications
88. Antimicrobial properties and applications of metal nanoparticles biosynthesized by green methods
89. Green nickel/nickel oxide nanoparticles for prospective antibacterial and environmental remediation applications10.1016/j.ceramint.2021.12.039 ↗
90. Green synthesis and characterizations of Nickel oxide nanoparticles using leaf extract of Rhamnus virgata and their potential biological applications10.1002/aoc.4950 ↗
91. Controlled synthesis of spin glass nickel oxide nanoparticles and evaluation of their potential antimicrobial activity: a cost effective and eco-friendly approach10.1039/c3ra42628a ↗