Alleviated surface calcium segregation and improved electrocatalytic properties of La0.3Ca0.7Fe0.7Cr0.3O3-δ cathode: A demonstration of A-site deficiency effect
Source abstract
Abstract
The crystal structure, electrical conductivity, thermal expansion behavior and electrocatalytic properties for oxygen reduction reaction of A-site deficient (La 0.3Ca 0.7) 1−xFe 0.7Cr 0.3O 3-δ (x = 0.01–0.05) perovskites were investigated in comparison with their stoichiometric counterpart (x = 0). The tolerance limit of the perovskite structure for A-site deficiency was x = 0.04 or so. The unit cell parameters decreased and oxygen nonstoichiometry ( δ ) increased with increasing A-site deficiency. The electrocatalytic activity was appreciably improved by introducing an A-site deficiency of x = 0.04, concomitant with a slight decrease of the electrical conductivity and thermal expansion coefficient. The porous electrode with x = 0.04 exhibited a polarization resistance of 0.044 Ω·cm 2 at 800 °C, lowered by about 42% compared with the electrode with x = 0. Moreover, the introduction of the A-site deficiency enhanced the stability of the perovskite structure and electrocatalytic activity relative to cathodic polarization. The electrode with x = 0 showed segregation of calcium onto the surface and an increase of the polarization resistance by 0.106 Ω·cm 2 after being cathodically polarized under 250 mA·cm -2 at 800 °C for 6 h. In contrast, surface calcium segregation was undetected for the electrode with x = 0.04 after being likewise polarized and the electrocatalytic activity of the polarized A-site deficient electrode was virtually undegraded. The improved stability of the structure and electrocatalytic activity of the A-site deficient electrode was tentatively explained with respect to its defect chemistry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Materials for fuel-cell technologies10.1038/35104620 ↗
2. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
3. Progress in material selection for solid oxide fuel cell technology: A review10.1016/j.pmatsci.2015.01.001 ↗
4. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
5. Combined theoretical and experimental analysis of processes determining cathode performance in solid oxide fuel cells10.1039/c3cp44363a ↗
6. A review of solid oxide fuel cell cathode materials with respect to their resistance to the effects of chromium poisoning10.1016/j.ssi.2020.115410 ↗
7. From powder properties to fuel cell performance-A holistic approach for SOFC cathode development10.1016/j.ssi.2007.11.037 ↗
8. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
9. Evaluation of La-Sr-Co-Fe-O perovskites for solid oxide fuel cells and gas separation membranes10.1016/S0167-2738(00)00394-5 ↗
10. Advances in cathode materials for solid oxide fuel cells: Complex oxides without alkaline earth metal elements10.1002/aenm.201500537 ↗
11. Systematic evaluation of cobalt-free Ln0.5Sr0.5Fe0.8Cu0.2O3-δ (Ln = La, Pr, and Nd) as cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2016.06.134 ↗
12. Electrochemical performance and stability of La0.5Sr0.5Fe0.9Nb0.1O3-δ symmetric electrode for solid oxide fuel cells10.1016/j.jpowsour.2018.07.119 ↗
13. Assessment of cobalt-free ferrite-based perovskite Ln0.5Sr0.5Fe0.9Mo0.1O3-δ (Ln = lanthanide) as cathodes for IT-SOFCs10.1016/j.jeurceramsoc.2020.11.035 ↗
14. Sr-rich chromium ferrites as symmetrical solid oxide fuel cell electrodes10.1016/j.jpowsour.2013.02.024 ↗
15. Surface and bulk study of strontium-rich chromium ferrite oxide as a robust solid oxide fuel cell cathode10.1039/C5TA05815E ↗
16. High performance La0.3Ca0.7Cr0.3Fe0.7O3-δ air electrode for reversible solid oxide fuel cell applications10.1016/j.ijhydene.2014.11.127 ↗
17. Electrochemistry of La0.3Sr0.7Fe0.7Cr0.3O3-δ as an oxygen and fuel electrode for RSOFCs10.1039/C5FD00029G ↗
18. Property optimization for strontium-rich lanthanum chromium ferrite cathodes: A demonstration of lanthanide replacement effect10.1016/j.materresbull.2018.05.031 ↗
19. Improved electrocatalytic properties of La0.3Ca0.7Fe0.7Cr0.3O3-δ electrodes for oxygen reduction reaction: The effect of electrode thickness10.1016/j.materresbull.2020.110967 ↗
20. Insights into surface alkaline-earth segregation on the surface of La0.3Me0.7Fe0.7Cr0.3O3-δ (Me=Sr, Ca) porous electrodes for oxygen reduction reaction10.1016/j.apsusc.2021.150659 ↗
21. Properties of A-site-deficient La0.6Sr0.4Co0.2Fe0.8O3-δ-based perovskite oxides10.1016/S0167-2738(99)00230-1 ↗
22. Introduction of A-site deficiency into La0.6Sr0.4Co0.2Fe0.8O3-δ and its effect on structure and conductivity10.1016/j.ssi.2004.11.021 ↗
23. Development of solid-oxide fuel cells that operate at 500 °C10.1149/1.1391758 ↗
24. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells Part I. Variation of composition10.1016/j.ssi.2005.03.009 ↗
25. Evaluation of A-site cation-deficient (Ba0.5Sr0.5)1−xCo0.8Fe0.2O3-δ (x>0) perovskite as a solid-oxide fuel cell cathode10.1016/j.jpowsour.2008.04.012 ↗
26. A-site deficient Ba1−xCo0.7Fe0.2Ni0.1O3-δ cathode for intermediate temperature SOFC10.1016/j.jpowsour.2010.05.051 ↗
27. Evaluation of cerium doped perovskites (Ce0.1Sr0.9)xCo0.3Fe0.7O3-δ as cathode materials for solid oxide fuel cells10.1016/j.cattod.2018.08.017 ↗
28. Performance and reaction process of Ba1−xCo0.7Fe0.2Nb0.1O3-δ cathode for intermediate-temperature solid oxide fuel cell10.1016/j.jallcom.2021.161158 ↗
29. A-site Ba-deficiency layered perovskite EuBa1−xCo2O6-δ cathodes for intermediate-temperature solid oxide fuel cells: Electrochemical properties and oxygen reduction reaction kinetics10.1016/j.ijhydene.2017.08.049 ↗
30. Evaluation of A-site Ba-deficient PrBa0.5−xSr0.5Co2O5+δ (x = 0, 0.04 and 0.08) as cathode materials for solid oxide fuel cells10.1016/j.jallcom.2021.160759 ↗
31. Investigation of surface Sr segregation in model thin film solid oxide fuel cell perovskite electrodes10.1039/C1EE02762J ↗
32. Factors that influence cation segregation at the surfaces of perovskite oxides10.1149/05701.2115ecst ↗
33. Insight into tuning the surface and bulk microstructure of perovskite catalyst through control of cation non-stoichiometry10.1016/j.jcat.2019.11.022 ↗
34. Degradation mechanisms of La-Sr-Co-Fe-O3 SOFC cathodes10.1149/1.2266160 ↗
35. Cation size mismatch and charge interactions drive dopant segregation at the surfaces of manganite perovskites10.1021/ja3125349 ↗
36. Mechanisms of performance degradation of (La,Sr)(Co,Fe)O3-δ solid oxide fuel cell cathodes10.1149/2.0031607jes ↗
37. Improved chemical and electrochemical stability of perovskite oxides with less reducible cations at the surface10.1038/nmat4659 ↗
38. Enhanced oxygen exchange of perovskite oxide surfaces through strain-driven chemical stabilization10.1039/C7EE00770A ↗
39. Electrochemical polarization dependence of the elastic and electrostatic driving forces to aliovalent dopant segregation on LaMnO310.1021/jacs.9b13040 ↗
40. Influence of the discretization methods on the distribution of relaxation times deconvolution: Implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
41. Analysis and application of distribution of relaxation times in solid state ionics10.1016/j.ssi.2016.10.009 ↗
42. Enhanced ORR activity of A-site deficiency engineered BaCo0.4Fe0.4Zr0.1Y0.1O3-δ cathode in practical YSZ fuel cells10.1016/j.ijhydene.2020.11.020 ↗
43. Thermal expansion of SOFC materials10.1007/BF02375916 ↗
44. Optimization of the interface polarization of the La2NiO4-based cathode working with the Ce1-xSmxO2-δ electrolyte system10.1016/j.jpowsour.2007.12.030 ↗
45. A kinetic study of oxygen reduction reaction on La2NiO4 cathodes by means of impedance spectroscopy10.1016/j.jelechem.2007.08.006 ↗
46. Factors controlling surface oxygen exchange in oxides10.1038/s41467-019-08674-4 ↗
47. La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells10.1016/j.jpowsour.2010.02.049 ↗
48. La0.6Sr0.4Fe0.8Cu0.2O3-δ perovskite oxide as cathode for IT-SOFC10.1016/j.ijhydene.2012.05.114 ↗
49. Effect of DC current polarization on the electrochemical behaviour of La2NiO4+δ and La3Ni2O7+δ-based systems10.1016/j.jpowsour.2008.10.073 ↗
50. , In situ study of electrochemical activation and surface segregation of the SOFC electrode material La0.75Sr0.25Cr0.5Mn0.5O3±δ10.1039/C1CP21743G ↗
51. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
52. Surface structures and defect properties of pure and doped La2NiO410.1039/b102678j ↗
53. Ca-containing CO2-tolerant perovskite materials for oxygen separation10.1016/j.memsci.2011.10.030 ↗
54. Surface termination and subsurface restructuring of perovskite-based solid oxide electrode materials10.1039/C4EE01497A ↗
55. The chemical evolution of the La0.6Sr0.4CoO3-δ surface under SOFC operating conditions and its implications for electrochemical oxygen exchange activity10.1007/s11244-018-1068-1 ↗
56. Influence of surface atomic structure demonstrated on oxygen incorporation mechanism at a model perovskite oxide10.1038/s41467-018-05685-5 ↗