journal article·2022-01

Perovskite fluoride KMF3 (M = Ni or Co)@reduced graphene oxide anode for Na-based dual-ion batteries

Yongfa Huang, Rui Ding, Danfeng Ying, Tong Yan, Yuxi Huang, Caini Tan, Xiujuan Sun, Enhui Liu

Publisher page

Abstract

Abstract Because of its low cost and high energy density, Na-based dual-ion batteries (Na-DIBs) have attracted more and more research and technical attention, providing broad prospects for emerging energy storage and conversion applications. However, developing advanced anodes for Na-DIBs with high energy density, long cycle life and high power density remains challenging. Here we demonstrate a facile strategy to synthesize KMF3 (M = Ni or Co)@reduced graphene oxide (recorded as KMF3 (M = Ni or Co)@rGO or Ni-G and Co-G) by a one-pot method. The Ni-G and Co-G electrodes exhibit a pseudocapacitive kinetics and a typical highly reversible conversion reaction mechanism by cyclic voltammetry (CV) and ex situ X-ray photoelectron spectroscopy (XPS). Further assembled with KS6 to form Na-DIBs, Ni-G//KS6 and Co-G//KS6 deliver high energy density (328.8 W h kg−1 and 187.6 W h kg−1), high power density (18.29 kW kg−1 and 21.62 kW kg−1) and cycle life over 1000 cycles. Moreover, these devices work well at − 20 to 40 °C. This work discusses new insights into perovskite fluoride as Na-DIBs, providing a strategy for high-energy-density and long-cycle energy storage systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Inorganic Fluorides and Related Compounds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Energy-storage technologies and electricity generation10.1016/j.enpol.2008.09.037 ↗
2. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
3. Recent progress and perspectives on dual-ion batteries10.1016/j.enchem.2019.100004 ↗
4. Recent advances in dual-carbon based electrochemical energy storage devices10.1016/j.nanoen.2020.104728 ↗
5. A review on the features and progress of dual-ion batteries10.1002/aenm.201703320 ↗
6. Perspective on performance, cost, and technical challenges for practical dual-ion batteries10.1016/j.joule.2018.09.003 ↗
7. Integrated configuration design for ultrafast rechargeable dual-ion battery10.1002/aenm.201700913 ↗
8. An ultrafast rechargeable hybrid sodium-based dual-ion capacitor based on hard carbon cathodes10.1002/aenm.201800140 ↗
9. Soft carbon as anode for high-performance sodium-based dual ion full battery10.1002/aenm.201602778 ↗
10. Dual intercalating molten electrolyte batteries10.1149/1.2055041 ↗
11. Electrochemical intercalation of PF6- into graphite10.1149/1.1393288 ↗
12. Intercalation of PF6- anion into graphitic carbon with nano pore for dual carbon cell with high capacity10.1016/j.jpowsour.2010.11.075 ↗
13. Investigation of PF6- and TFSI- anion intercalation into graphitized carbon blacks and its influence on high voltage lithium ion batteries10.1039/C4CP04113E ↗
14. A dual-ion battery constructed with aluminum foil anode and mesocarbon microbead cathode via an alloying/intercalation process in an ionic liquid electrolyte10.1002/admi.201600605 ↗
15. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
16. Recent advances of electrode materials for low-cost sodium-ion batteries towards practical application for grid energy storage10.1016/j.ensm.2017.01.002 ↗
17. Sodium and sodium-ion energy storage batteries10.1016/j.cossms.2012.04.002 ↗
18. Sodium-ion batteries10.1002/adfm.201200691 ↗
19. Hierarchical ZnO nanorod arrays grown on copper foam as an advanced three-dimensional skeleton for dendrite-free sodium metal anodes10.1016/j.nanoen.2020.105563 ↗
20. Conversion pseudocapacitance-contributing and robust hetero-nanostructural perovskite KCo0.54Mn0.46F3 nanocrystals anchored on graphene nanosheet anodes for advanced lithium-ion capacitors, batteries and their hybrids10.1039/C9TA06438A ↗
21. Perovskite KNi0.1Co0.9F3 as a pseudocapacitive conversion anode for high-performance nonaqueous Li-ion capacitors and dual-ion batteries10.1039/C9TA00493A ↗
22. Vacancy defective perovskite Na0.85Ni0.45Co0.55F3.56 nanocrystal anodes for advanced lithium-ion storage driven by surface conversion and insertion hybrid mechanisms10.1039/C9CC03053K ↗
23. Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature10.1016/j.jhazmat.2021.126218 ↗
24. Enhanced X-ray photon response in solution-synthesized CsPbBr3 nanoparticles wrapped by reduced graphene oxide10.1016/j.solmat.2018.08.009 ↗
25. High-performance FeSb–TiC–C nanocomposite anodes for sodium-ion batteries10.1039/c4cp01240b ↗
26. Comparison of electrochemical performances of olivine NaFePO4 in sodium-ion batteries and olivine LiFePO4 in lithium-ion batteries10.1039/C2NR32758A ↗
27. Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies10.1039/B814914C ↗
28. Particle size effects on the electrochemical performance of copper oxides toward lithium10.1149/1.1353566 ↗
29. A novel sodium-ion supercabattery based on vacancy defective Ni–Co–Mn ternary perovskite fluoride electrode materials10.1039/D1TA02894D ↗
30. A vacancy-rich perovskite fluoride K0.79Ni0.25Co0.36Mn0.39F2.83@rGO anode for advanced Na-based dual-ion batteries10.1039/D1CC01477C ↗
31. Understanding and improving the initial Coulombic efficiency of high-capacity anode materials for practical sodium ion batteries10.1016/j.ensm.2019.05.008 ↗
32. A high-performance sodium-ion battery enhanced by macadamia shell derived hard carbon anode10.1016/j.nanoen.2017.07.018 ↗
33. Synthesis of MoS2@C nanotubes via the kirkendall effect with enhanced electrochemical performance for lithium ion and sodium ion batteries10.1002/smll.201600043 ↗
34. Amorphous Fe2O3/graphene composite nanosheets with enhanced electrochemical performance for sodium-ion battery10.1021/acsami.6b09444 ↗
35. Enhanced electrochemical performances of Bi2O3/rGO nanocomposite via chemical bonding as anode materials for lithium ion batteries10.1021/acsami.7b00996 ↗
36. Reduced graphene oxide as a stable and high-capacity cathode material for Na-ion batteries10.1038/srep40910 ↗
37. Reduced graphene oxide with superior cycling stability and rate capability for sodium storage10.1016/j.carbon.2013.01.064 ↗
38. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
39. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
40. Penne-like MoS2/carbon nanocomposite as anode for sodium-ion-based dual-ion battery10.1002/smll.201703951 ↗
41. Compositional graphitic cathode investigation and structural characterization tests for Na-based dual-ion battery applications using ethylene carbonate:ethyl methyl carbonate-based electrolyte10.1016/j.electacta.2017.01.037 ↗
42. Lithiation-induced vacancy engineering of Co3O4 with improved faradic reactivity for high-performance supercapacitor10.1002/adfm.202004172 ↗
43. Cactus-like NiCoP/NiCo-OH 3D architecture with tunable composition for high-performance electrochemical capacitors10.1002/adfm.201800036 ↗
44. Highly improved cycling stability of anion de-/intercalation in the graphite cathode for dual-ion batteries10.1002/adma.201804766 ↗
45. Conversion/insertion pseudocapacitance-driven vacancy defective perovskite fluorides K0.82Co0.43Mn0.57F2.66@reduced graphene oxide anode for powerful Na-based dual-ion batteries and capacitors10.1016/j.electacta.2021.138713 ↗
46. The electrochemical performance and mechanism of cobalt (II) fluoride as anode material for lithium and sodium ion batteries10.1016/j.electacta.2015.04.029 ↗
47. Fully reversible homogeneous and heterogeneous Li storage in RuO2 with high capacity10.1002/adfm.200304406 ↗
48. Reversible formation and decomposition of LiF clusters using transition metal fluorides as precursors and their application in rechargeable Li batteries10.1002/adma.200304574 ↗
49. Extra storage capacity in transition metal oxide lithium-ion batteries revealed by in situ magnetometry10.1038/s41563-020-0756-y ↗
50. Ultrathin layered hydroxide cobalt acetate nanoplates face-to-face anchored to graphene nanosheets for high-efficiency lithium storage10.1002/adfm.201605544 ↗
51. On the origin of the extra electrochemical capacity displayed by MO/Li cells at low potential10.1149/1.1467947 ↗