Photoconductive PbSe thin films and the role of potassium iodide
Source abstract
Abstract
The PbSe thin films are sensitized by oxidation and iodization process to improve the infrared photoresponse enabling higher performing photodetectors and photovoltaic devices. Iodine is widely used for PbSe sensitization, and it influences the thin film morphology and also forms a PbI 2 passivation layer. Potassium Iodide (KI) has been used as an additive in chemical bath deposited films of PbSe since 1959 and continues to this day. This work aims to better understand the role of KI in PbSe films as it improves MWIR photoresponse by as much as 300% compared to samples without KI. In this research paper, we show that low levels of KI (180 mMol) densify the PbSe film, increase grain size, reduce film stress/cracking, and improve IR absorption (proportional to dose). The transmission electron microscopy (TEM) and X-ray diffraction (XRD) studies show thermal annealed PbSe films with KI convert round equiaxed grains to highly faceted grains coated with PbI 2 ranging from 3 to 10 nm, throughout the film. The dense PbSe grains encapsulated in PbI 2 lead to a more uniform PbSeO 3 layer following thermal oxidation. The electrical resistance versus temperature measurements shows a strong phase transition occurs at 220 °C only for samples with KI. X-ray photoelectron spectroscopy studies confirm that PbSe films with KI annealed in an argon atmosphere at 460 °C have a surface layer of PbI 2, and no potassium was detected, suggesting desorption or diffusion of potassium into the PbSe grains. PbSe films with KI showed 30x higher electrical resistance (R D ) under dark conditions, leading to reduced carrier concentration (lower dark current) and improved photoresponse without impacting electron mobility. In summary, we have clarified the role of KI in PbSe thin films and how it can be used to improve the infrared photoresponse.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Electronic and Structural Properties of Oxides · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Photoconductive mechanism of IR-sensitive iodized PbSe thin films via strong hole–phonon interaction and minority carrier diffusion10.1364/AO.403641 ↗
2. Laser annealing to improve PbSe thin film photosensitivity and specific detectivity10.1364/AO.401535 ↗
3. Electrical transport properties of sensitized PbSe thin films for IR imaging sensors
4. Properties of chemical bath deposited and sensitized PbSe thin films for IR detection
5. Mid-wavelength infrared photo response and band alignment for sensitized PbSe thin films10.1063/1.5114923 ↗
6. Mechanistic studies of oxidation and iodization of PbSe thin film sensitization for mid-infrared detection10.1063/5.0077053 ↗
7. Investigation into the microstructure and phase composition of polycrystalline lead selenide films in the course of thermal oxidation10.1134/S108765960603014X ↗
8. Doping effect on the kinetics and mechanism of thermal oxidation of polycrystalline PbSe layers10.1134/S0020168506090032 ↗
9. Robert F. Rolsten and Theodore L. Brown. Iodide Metals and Metal Iodides. (1964).10.1149/1.2426136 ↗
10. Effect of an iodine-containing additive on the composition, structure, and morphology of chemically deposited lead selenide films10.1134/S1063783414120324 ↗
11. Effect of iodine doping in the deposition solution and iodine vapor pressure in the sensitization treatment on the properties of PbSe films10.1117/1.OE.56.9.091607 ↗
12. Laser sintered PbSe semiconductor thin films for Mid-IR applications using nanocrystals10.1016/j.jallcom.2020.156537 ↗