Microstructure and electrical property of NaNbO3 ceramics prepared by cold sintering process assisted post-heat-treatment
Source abstract
Abstract
Abstract NaNbO3 (NN) ceramics have attracted worldwide attention as a kind of dielectric material, but with the drawbacks of difficulty in sintering. In this work, high performance NN ceramics were achieved by using cold sintering process assisted post-heat-treatment (CSP-PHT). The effects of cold sintering process (CSP) and post-heat-treatment (PHT) of NN ceramics on the microstructure and electrical properties were systematically investigated. High dense NN ceramics with relative density of 92.6% were achieved by CSP, which increased to 96.9% with improved crystallinity after PHT at 1230 °C. Of particular interest is that the NN ceramics prepared by CSP-PHT exhibited typical ferroelectric hysteresis loops with large polarization of 34.2 μC/cm2, which is much higher than the conventional sintering (CS) method at 1300 °C with value of 24.8 μC/cm2. Our work shows that CSP-PHT is an effective method to obtain high-performance NN ceramics at lower sintering temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Dielectric and piezoelecrtic properties of lead-free (Na0.5Bi0.5)TiO3-NaNbO3 ceramics10.1016/j.mseb.2004.04.019 ↗
2. Excellent comprehensive energy storage properties of novel lead-free NaNbO3-based ceramics for dielectric capacitor applications10.1039/C9TC01414D ↗
3. Large electrocaloric response with superior temperature stability in NaNbO3-based relaxor ferroelectrics benefiting from the crossover region10.1039/D0TA11423E ↗
4. Electric-field-induced antiferroelectric to ferroelectric phase transition in polycrystalline NaNbO310.1016/j.actamat.2020.09.002 ↗
5. Crystal-size dependence of the spark-plasma-sintering kinetics of ZrB2 ultra-high-temperature ceramics10.1016/j.jeurceramsoc.2011.08.027 ↗
6. Two-step sintering of nanocrystalline ZnO compacts: effect of temperature on densification and grain growth10.1111/j.1551-2916.2007.02029.x ↗
7. Microwave sintering of ceramics10.1146/annurev.ms.22.080192.001101 ↗
8. Rate-controlled synthesis and sintering of nanocrystalline barium titanate powder10.1016/S0965-9773(98)00075-0 ↗
9. Superconducting properties of MgB2 bulk materials prepared by high-pressure sintering10.1063/1.1371239 ↗
10. Hydrothermal-assisted cold sintering process: a new guidance for low-temperature ceramic sintering10.1021/acsami.6b07481 ↗
11. Cold sintering: a paradigm shift for processing and integration of ceramics10.1002/anie.201605443 ↗
12. Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics10.1111/jace.14617 ↗
13. Cold sintering process: a novel technique for low-temperature ceramic processing of ferroelectrics10.1111/jace.14554 ↗
14. Development of the cold sintering process and its application in solid-state lithium batteries10.1016/j.jpowsour.2018.05.015 ↗
15. Structural and electrical characterization of NaNbO3-PVDF nanocomposites fabricated using cold sintering synthesis route10.1063/1.5046458 ↗
16. Dielectric properties of lithium molybdate ceramic fabricated at room temperature10.1111/jace.13277 ↗
17. Cold sintering process for ZrO2-based ceramics: significantly enhanced densification evolution in yttria-doped ZrO210.1111/jace.14593 ↗
18. Composition, microstructure and electrical properties of K0.5Na0.5NbO3 ceramics fabricated by cold sintering assisted sintering10.1016/j.jeurceramsoc.2018.11.044 ↗
19. Preparation of Na0.5Bi0.5TiO3 ceramics by hydrothermal-assisted cold sintering10.1016/j.ceramint.2018.12.166 ↗
20. Microstructure, dielectric, and energy storage properties of BaTiO3 ceramics prepared via cold sintering10.1016/j.ceramint.2017.12.044 ↗
21. Remarkably improved electrical conductivity of ZnO ceramics by cold sintering and post-heat-treatment10.1016/j.ceramint.2018.07.192 ↗
22. Performances presented by zinc oxide thin films deposited by spray pyrolysis10.1016/S0040-6090(98)01394-7 ↗
23. Influence of the post-treatment on the properties of ZnO thin films10.1016/S0040-6090(00)01577-7 ↗
24. Phase structure, morphology, and Raman characteristics of NaNbO3 particles synthesized by different methods10.1016/j.materresbull.2008.07.014 ↗
25. Ferroelectric Q and antiferroelectric P phases’ coexistence and local phase transitions in oxygen-deficient NaNbO3 single crystal: micro-Raman, dielectric and dilatometric studies10.1002/jrs.3140 ↗
26. Polymorphism in micro-, submicro-, and nanocrystalline NaNbO3
27. Thermal and physical properties of sodium niobate ceramics over a wide temperature range10.1134/S1063783413040045 ↗
28. Dielectric and pyroelectric properties of sodium niobate ceramics containing inclusions of ferroelectric Q phase10.1002/pssa.201800972 ↗
29. Crystal Structure and electrical properties of complex perovskite solid solutions based on (1-x)NaNbO3-xBi(Zn0.5Ti0.5)O310.1007/s10832-014-9953-x ↗
30. High temperature phase stability in Li0.12Na0.88NbO3: a combined powder X-ray and neutron diffraction study10.1063/1.4929645 ↗
31. A new, lead free, family of perovskites with a diffuse phase transition: NaNbO3-based solid solutions10.1016/S0022-3697(02)00181-6 ↗
32. The optical and electrical properties of single crystals of sodium niobate10.1080/14786440508520582 ↗
33. Phase transitions of sodium niobate powder and ceramics, prepared by solid state synthesis10.1063/1.3512980 ↗
34. Direct evidence of an incommensurate phase in NaNbO3 and its implication in NaNbO3-based lead-free antiferroelectrics10.1063/1.4930067 ↗
35. Lead-free antiferroelectric: xCaZrO3-(1-x)NaNbO3 system (0 ≤ x ≤ 0.10)10.1039/C4DT03919J ↗
36. Advantages of low partial pressure of oxygen processing of alkali niobate: NaNbO310.1111/jace.12815 ↗