journal article·2021-08

Structure evolution and enhanced electrical performance for BiScO3–Bi(Ni1/2Zr1/2)O3–PbTiO3 solid solutions near the morphotropic phase boundary

Tian-Long Zhao, Chunlong Fei, Kaiwen Pu, Xianying Dai, Jianjun Song, Chun-Ming Wang, Shuxiang Dong

Publisher page

Abstract

Abstract In this work, the Bi(Me)O3–PbTiO3-type (1-x-y)BiScO3-xBi(Ni1/2Zr1/2)O3-yPbTiO3 (BS-xBNZ-yPT) ternary piezoelectric ceramics have been prepared with x ≤ 0.075 by the traditional solid-state reaction methods. For compositions with x > 0.100, the Curie temperature (Tc) will reduce below 400 °C. X-ray powder diffraction results demonstrate the system a single perovskite phase structure. Analyzed the phase structure evolutions, it can be found the MPB of this BS-xBNZ-yPT ternary solid solutions shifts to the low PT content regions with the increasing BNZ content. Dielectric diffuse behaviour in this system may result from the production of polar nanodomains by the introduction of BNZ. The piezoelectric performance is enhanced with only a little decrease in Tc by the introduction of small content BNZ. The most promising composition BS-0.025BNZ-0.635PT exhibits the piezoelectric constant d33 of 480 pC/N, planar electromechanical coupling coefficients kp of 58.2%, and Curie temperature Tc of 439 °C, respectively. The unipolar strain was found up to 0.233% with the small strain hysteresis of 11.4%. All these properties together with the good thermal stability indicate the BS-xBNZ-yPT ceramics potential candidates for high temperature piezoelectric actuator application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Piezoelectric materials for high temperature sensors10.1111/j.1551-2916.2011.04792.x ↗
2. Review of high temperature piezoelectric materials, devices, and applications
3. 0.36BiScO3–0.64PbTiO3 piezoelectric ceramics for high temperature ultrasonic transducer applications10.1016/j.jallcom.2018.01.393 ↗
4. Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals10.1063/1.365983 ↗
5. A monoclinic ferroelectric phase in the Pb(Zr1-xTix)O3 solid solution10.1063/1.123756 ↗
6. Giant tuning of ferroelectricity in single crystals by thickness engineering10.1126/sciadv.abc7156 ↗
7. Ultrahigh piezoelectricity in ferroelectric ceramics by design10.1038/s41563-018-0034-4 ↗
8. Kinetics of domain switching by mechanical and electrical stimulation in relaxor-based ferroelectrics10.1103/PhysRevApplied.8.064005 ↗
9. Jaffe · 1971
10. Characteristics of relaxor-based piezoelectric single crystals for ultrasonic transducers10.1109/58.655639 ↗
11. Structure and good piezoelectric performance in the complex system of Pb(Zn,Ni)NbO3–Pb(In,Yb)NbO3–Pb(Zr,Hf,Ti)O3
12. New high temperature morphotropic phase boundary piezoelectrics based on Bi(Me)O3–PbTiO3 ceramics10.1143/JJAP.40.5999 ↗
13. Preparation and characterization of high temperature perovskite ferroelectrics in the solid-solution (1-x)BiScO3-xPbTiO310.1143/JJAP.41.2099 ↗
14. Enhanced piezoelectric properties of (Bi,Sc)O3–(Pb,Ti)O3 ceramics by optimized calcination process10.1016/j.jallcom.2016.07.326 ↗
15. Point defect engineering of high temperature piezoelectric BiScO3–PbTiO3 for enhanced voltage response10.1016/j.matdes.2016.07.015 ↗
16. Investigation on resonant vibration performances of Fe-doped BiScO3–PbTiO3 ceramics in high-temperature environment10.1111/jace.13707 ↗
17. Electrical properties of zirconium-modified BiScO3–PbTiO3 piezoelectric ceramics at re-designed phase boundary10.1016/j.matlet.2017.12.036 ↗
18. Reduced dielectric loss and strain hysteresis in Fe and Mn comodified high-temperature BiScO3-PbTiO3 ceramics10.1111/jace.13224 ↗
19. High-power piezoelectric characteristics of manganese-modified BiScO3–PbTiO3 high-temperature piezoelectric ceramics10.1088/0022-3727/45/46/465303 ↗
20. Doping of BiScO3–PbTiO3 ceramics for enhanced properties10.1111/j.1551-2916.2010.03648.x ↗
21. Structural and electrical properties of cation and anion doped BiScO3–PbTiO3 ceramics10.1016/j.jallcom.2018.05.156 ↗
22. Ultralow dielectric loss of BiScO3–PbTiO3 ceramics by Bi(Mn1/2Zr1/2)O3 modification10.1016/j.jeurceramsoc.2020.02.015 ↗
23. Structure and enhanced piezoelectric performance of BiScO3–PbTiO3–Pb(Ni1/3Nb2/3)O3 ternary high temperature piezoelectric ceramics10.1016/j.jallcom.2019.07.286 ↗
24. Ferroelectric, piezoelectric, and dielectric properties of BiScO3–PbTiO3–Pb(Cd1/3Nb2/3)O3 ternary high temperature piezoelectric ceramics10.1063/1.4812223 ↗
25. Structure, electrical properties, and depoling mechanism of BiScO3–PbTiO3–Pb(Zn1/3Nb2/3)O3 high-temperature piezoelectric ceramics10.1063/1.3525995 ↗
26. Dielectric characteristics of perovskite-structured high-temperature relaxor ferroelectrics: the BiScO3-Pb(Mg1/3Nb2/3)O3-PbTiO3 ternary system10.1111/j.1551-2916.2008.02298.x ↗
27. Giant piezoelectricity of ternary perovskite ceramics at high temperatures
28. Enhanced piezoelectric performance of BiScO3–PbTiO3 ceramics modified by 0.03Pb(Sb1/2Nb1/2)O310.1016/j.jallcom.2017.10.052 ↗
29. Effect of Pb(Mn1/3Sb2/3)O3 addition on the electrical properties of BiScO3–PbTiO3 piezoelectric ceramics10.1016/j.jallcom.2019.03.109 ↗
30. Growth and characterization of ternary BiScO3–Pb(Cd1/3Nb2/3)O3–PbTiO3 ferroelectric single crystals with high Curie temperature10.1039/D0CE00473A ↗
31. Thermal depolarization in the high-temperature ternary piezoelectric system xPbTiO3–yBiScO3–zBi(Ni1/2Ti1/2)O310.1111/jace.13268 ↗
32. Dielectric and piezoelectric properties of (1-x)Bi(Sc0.9(Zn1/2Ti1/2)0.1)O3-xPbTiO3 Ceramics10.1080/00150193.2010.485539 ↗
33. High piezoelectric and mechanical performances in multiferroic (1-x-y) PbTiO3-xBi(Ni1/2Ti1/2)O3-yBiScO310.1039/c2jm15952j ↗
34. Temperature dependences of the ferroelectric and dielectric properties of high curie temperature PbTiO3–BiScO3–Bi(Zn1/2Zr1/2)O310.1016/j.materresbull.2013.02.002 ↗
35. Characterization of the high-temperature ferroelectric (100-x-y)BiScO3-xBi(Zr0.5Zn0.5)O3-yPbTiO3 perovskite ternary solid solution10.1111/jace.12648 ↗
36. Temperature dependence of piezoelectric properties of high-TC Bi(Mg1/2Ti1/2)O3–PbTiO310.1063/1.3191666 ↗
37. Structure and dielectric/piezoelectric properties of LiNbO3-doped BiScO3–PbTiO3 ceramics with morphotropic phase boundary composition10.1007/s10853-011-5842-8 ↗
38. Effects of LiNbO3 doping on the microstructures and electrical properties of BiScO3–PbTiO3 piezoelectric system10.1007/s10854-018-9898-y ↗
39. Improved electrical properties of BaTiO3 modified BiScO3–PbTiO3 ceramics with high Curie temperature10.1016/j.ceramint.2017.06.021 ↗
40. Dielectric and piezoelectric properties of (Bi0.9Li0.10)(Sc0.90Ta0.10)O3-PbTiO3 high-temperature relaxor piezoelectric ceramics10.1002/pssa.200925192 ↗
41. Piezoelectric properties in the perovskite BiScO3–PbTiO3–(Ba,Sr)TiO3 ternary system10.1143/JJAP.42.5181 ↗
42. Effective ionic radii in oxides and fluorides10.1107/S0567740869003220 ↗
43. Relation between tolerance factor and Tc in Aurivillius compounds10.1557/JMR.2001.0433 ↗
44. Large piezoelectric response and polarization in relaxor ferroelectric PbTiO3–Bi(Ni1/2Zr1/2)O310.1111/jace.12236 ↗
45. Diffused phase transition, ionic conduction mechanisms and electric-field dependent ferroelectricity of Nb/Ce co-doped Pb(Zr0.52Ti0.48)O3 ceramics10.1016/j.jallcom.2020.155500 ↗
46. Soft modes in relaxor ferroelectrics10.1080/01411598108241305 ↗
47. Intrinsic and Extrinsic Size Effects in Fine-Grained Morphotropic-Phase-Boundary Lead Zirconate Titanate Ceramics10.1111/j.1151-2916.1998.tb02389.x ↗
48. On the origin of grain size effects in Ba(Ti0.96Sn0.04)O3 perovskite ceramics10.1016/j.jeurceramsoc.2019.01.041 ↗
49. Contribution of piezoelectric effect, electrostriction and ferroelectric/ferroelastic switching to strain-electric field response of dielectrics10.1142/S2010135X13500070 ↗