journal article·2023-11Open access

A high-performance Co-free electrode for solid oxide cells: La0.7Sr0.3Cu0.15Fe0.85O3-δ synthesis and characterisation

Davide Cademartori, Antonio Maria Asensio, Davide Clematis, Juan Felipe Basbus, Massimo Viviani, Sabrina Presto, Antonio Barbucci, M. Paola Carpanese

Abstract

A Co-free perovskite material, La0.7Sr0.3Cu0.15Fe0.85O3-?, is synthesized and electrochemically characterized to evaluate its potential application as electrocatalyst in the air electrode of solid oxide cells. The powder was firstly synthesized by the sol-gel method and subsequently morphologically and structurally characterized by scanning electron microscope and X-ray diffraction. Symmetrical circular button cells featuring Sm-doped ceria (20% Sm) as supporting electrolyte and La0.7Sr0.3Cu0.15Fe0.85O3-? as electrocatalyst were manufactured to carry out electrochemical investigations. Two different electrode morphologies are analyzed. In the first structure, the La0.7Sr0.3Cu0.15Fe0.85O3-? calcined powders are directly deposited by slurry coating on a dense sintered supporting pellet of Sm-doped ceria. In the second electrode configuration, the precursor solution of La0.7Sr0.3Cu0.15Fe0.85O3-? impregnates a porous scaffold of Sm- doped ceria, previously deposited and co-sintered with the supporting electrolyte. The performance of the samples was studied by means of electrochemical impedance spectroscopy, measuring polarization resistances of 0.0153 ?cm2 at 700 °C and 0.052 ?cm2 at 600 °C for the slurry coated and infiltrated electrodes, respectively. These values, according to the authors knowledge, are amongst the lowest ever obtained for Co-free solid oxides electrodes. However, the very high electrocatalytic activity obtained at intermediate temperatures is not accompanied by chemical stability over time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Infiltrated Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Based electrodes as anodes in solid oxide electrolysis cells10.3390/en13143659 ↗
2. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
3. Cathode materials for reduced-temperature SOFCs10.1149/1.1617300 ↗
4. Recent advances, practical challenges, and perspectives of intermediate temperature solid oxide fuel cell cathodes10.1039/D1TA08475E ↗
5. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
6. Infiltration, overpotential and ageing effects on cathodes for solid oxide fuel cells: La0.6Sr0.4Co0.2Fe0.8O3-δ versus Ba0.5Sr0.5Co0.8Fe0.2O3-δ10.1149/2.0161710jes ↗
7. Impregnation of microporous SDC scaffold as stable solid oxide cell BSCF-based air electrode10.1016/j.energy.2021.121514 ↗
8. Electrocatalytic activity of perovskite-based cathodes for solid oxide fuel cells10.1016/j.ijhydene.2019.01.128 ↗
9. Characterisation of La0.6Sr0.4Co0.2Fe0.8O3-δ – Ba0.5Sr0.5Co0.8Fe0.2O3-δ composite as cathode for solid oxide fuel cells10.1016/j.electacta.2017.04.079 ↗
10. Thermal expansion of Gd-doped ceria and reduced ceria10.1016/S0167-2738(00)00646-9 ↗
11. Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents10.1016/j.ssi.2004.08.021 ↗
12. Relationship between cation substitution and stability of perovskite structure in SrCoO3–δ-based mixed conductors10.1016/j.ssi.2006.10.022 ↗
13. Structural instability of cubic perovskite BaxSr1−xCo1−yFeyO3−δ10.1016/j.ssi.2007.11.031 ↗
14. Will global cobalt supply meet demand? The geological, mineral processing, production and geographic risk profile of cobalt10.1016/j.resconrec.2022.106855 ↗
15. Synthesis and characterization of La0.6Sr0.4Fe0.8Cu0.2O3−δ oxide as cathode for intermediate temperature solid oxide fuel cells10.1016/j.jssc.2015.04.044 ↗
16. La0.8Sr0.2Fe0.8Cu0.2O3−δ as “cobalt-free” cathode for La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolyte10.1016/j.jpowsour.2014.07.183 ↗
17. La0.6Sr0.4Fe0.8Cu0.2O3−δ perovskite oxide as cathode for IT-SOFC10.1016/j.ijhydene.2012.05.114 ↗
18. Electrical conductivity, thermal expansion and electrochemical properties of Fe-doped La0.7Sr0.3CuO3−δ cathodes for solid oxide fuel cells10.1016/j.jallcom.2008.07.044 ↗
19. Cobalt free LaxSr1−xFe1−yCuyO3-δ (x = 0.54, 0.8, y = 0.2, 0.4) perovskite structured cathode for SOFC10.1016/j.ceramint.2020.04.143 ↗
20. Exsolution of Cu nanoparticles in (LaSr)0.9Fe0.9Cu0.1O4 Ruddlesden-Popper oxide as symmetrical electrode for solid oxide cells10.1016/j.apsusc.2020.145525 ↗
21. Citrate–nitrate auto-combustion synthesis of perovskite-type nanopowders: a systematic approach10.1016/j.jeurceramsoc.2008.06.012 ↗
22. Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review10.1016/j.rser.2014.04.043 ↗
23. Performance of an anode-supported SOFC with anode functional layers10.1016/j.electacta.2008.05.063 ↗
24. Precautions of using three-electrode configuration to measure electrode overpotential in solid oxide electrochemical cells: insights from finite element modeling10.1149/1945-7111/aba876 ↗
25. Understanding the electrochemical behaviour of LSM-based SOFC cathodes. Part I — Experimental and electrochemical10.1016/j.ssi.2017.01.007 ↗
26. Geometric requirements of solid electrolyte cells with a reference electrode10.1149/1.1838436 ↗
27. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
28. Barsoukov · 2005 · 205
29. Correcting for inductance in low-impedance electrochemical systems10.1007/s11837-022-05555-y ↗
30. Rietveld refinement of Debye-Scherrer synchrotron X-ray data from Al2O310.1107/S0021889887087090 ↗
31. Crystal structures and magnetic properties of strontium and copper doped lanthanum ferrites10.1016/j.jssc.2012.02.020 ↗
32. Nb and Cu co-doped (La,Sr)(Co,Fe)O3: a stable electrode for solid oxide cells10.1039/D0RA10313F ↗
33. La0.4Bi0.4Sr0.2FeO3-δ as cobalt-free cathode for intermediate-temperature solid oxide fuel cell10.1016/j.electacta.2016.01.164 ↗
34. Nanointegrated, high-performing cobalt-free bismuth-based composite cathode for low-temperature solid oxide fuel cells10.1021/acsami.8b08911 ↗
35. Highly active and stable cobalt-free hafnium-doped SrFe0.9Hf0.1O3−δ perovskite cathode for solid oxide fuel cells10.1021/acsaem.8b00198 ↗
36. A novel self-assembled cobalt-free perovskite composite cathode with triple-conduction for intermediate proton-conducting solid oxide fuel cells10.1002/adfm.202209695 ↗
37. Enhancing electrode performance by exsolved nanoparticles: a superior cobalt-free perovskite electrocatalyst for solid oxide fuel cells10.1021/acsami.6b12157 ↗
38. Cobalt-Free perovskite cathodes for solid oxide fuel cells10.1002/celc.201900391 ↗
39. Characterization and comparison of different cathode materials for SC-SOFC: LSM, BSCF, SSC, and LSCF10.1002/fuce.201100064 ↗
40. Transport properties of solid oxide electrolyte ceramics: a brief review10.1016/j.ssi.2004.06.015 ↗
41. Electrode kinetics of porous Ni-3YSZ cermet operated in fuel cell and electrolysis modes for solid oxide cell application10.1016/j.electacta.2021.138765 ↗
42. Solid oxide fuel cells for shipping: a machine learning model for early detection of hazardous system deviations10.1016/j.psep.2023.02.022 ↗
43. On the stabilization and extension of the distribution of relaxation times analysis10.1016/j.electacta.2021.138916 ↗
44. Performance and DRT analysis of infiltrated functional cathode based on the anode supported SOFCs with long-term stability10.1016/j.ijhydene.2022.03.289 ↗
45. Electrospun core–shell fibers for high-efficient composite cathode-based solid oxide fuel cells10.1021/acs.energyfuels.0c02953 ↗
46. Calcium doping in double perovskite SmBa1−xCaxCo2O5+δ to enhance the electrochemical activity of solid oxide cell reversible oxygen electrode10.1016/j.jallcom.2022.167731 ↗
47. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
48. La/Ba-based cobaltites as IT-SOFC cathodes: a discussion about the effect of crystal structure and microstructure on the O2-reduction reaction10.1016/j.electacta.2016.08.132 ↗
49. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
50. Selection of cathode contact materials for solid oxide fuel cells10.1016/j.jpowsour.2011.06.044 ↗
51. Use of a catalyst layer for anode-supported SOFCs running on ethanol fuel10.1016/j.jpowsour.2007.11.054 ↗
52. A critical review of the nano-structured electrodes of solid oxide cells10.1039/D2CC03877C ↗
53. The stability of LSF-YSZ electrodes prepared by infiltration10.1149/1.2709510 ↗