journal article·2023-01

Monolithic perovskite/silicon tandem solar cells with optimized front zinc doped indium oxides and industrial textured silicon heterojunction solar cells

Jiafan Zhang, Linfeng Lu, Juan Zhang, Sha Li, Xiaoming Hua, Xiangrong Zhu, Yi-An Ding, Yinyue Lin, Shan-Ting Zhang, Dongdong Li

Publisher page

Abstract

The power conversion efficiency (PCE) of monolithic perovskite/silicon tandem solar cells has surpassed that of silicon single-junction solar cells recently. Industrial textured crystalline silicon heterojunction solar cells are considered as competitive candidate bottom cells because of their high efficiency and simple process flow. Meanwhile, the front transparent conductive window layers with industrial compatibility and low processing temperature are worth investigating in detail. In this work, zinc-doped indium oxide (IZO) thin films achieved by room-temperature sputtering are studied as a function of sputtering powers. The IZO thin film with the resistivity and electron mobility of 7.2 × 10 −4 Ω cm and 40.03 cm 2 /Vs are obtained under 85 W, which is implemented into the monolithic perovskite/silicon tandem solar cells. A PCE of 19.38% is realized based on the industrial textured silicon heterojunction bottom solar cell and optimized IZO films.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Solar cell efficiency tables (version 57)10.1002/pip.3371 ↗
2. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
3. Monolithic perovskite/silicon tandem solar cell with>29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
4. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
5. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
6. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
7. A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction10.1063/1.4914179 ↗
8. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
9. 27.9% efficient monolithic perovskite/silicon tandem solar cells on industry compatible bottom cells10.1002/solr.202100244 ↗
10. Efficient monolithic perovskite/silicon tandem solar cell with cell area>1 cm210.1021/acs.jpclett.5b02686 ↗
11. Light trapping properties of pyramidally textured surfaces10.1063/1.339189 ↗
12. Minimizing optical losses in monolithic perovskite/c-Si tandem solar cells with a flat top cell10.1364/OE.24.0A1288 ↗
13. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
14. Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon10.1126/science.aaz3691 ↗
15. Blade-coated perovskites on textured silicon for 26%-efficient monolithic perovskite/silicon tandem solar cells10.1016/j.joule.2020.01.008 ↗
16. Improving performance of CIGS solar cells by annealing ITO thin films electrodes
17. High-mobility hydrogenated fluorine-doped indium oxide film for passivating contacts c-Si solar cells10.1021/acsami.9b14709 ↗
18. Sputtered rear electrode with broadband transparency for perovskite solar cells10.1016/j.solmat.2015.06.024 ↗
19. IZO or IOH window layers combined with Zn (O, S) and CdS Buffers for Cu (In, Ga) Se2 solar cells
20. Electrochemical characterization of transparent conducting IZO: Ga thin films10.1016/j.jallcom.2019.151776 ↗
21. High Performance of IZO Coated on PET Substrate for Electroluminescence Device Using Oxygen Plasma Treatment
22. Sputtered indium-zinc oxide for buffer layer free semitransparent perovskite photovoltaic devices in perovskite/silicon 4T-tandem solar cells
23. Influence of thickness on the optical properties of amorphous GeSe2 thin films: analysis using Raman spectra, Urbach energy and Tauc parameter10.1080/14786435.2011.647104 ↗
24. Advantages of using amorphous indium zinc oxide films for window layer in Cu (In, Ga) Se2 solar cells10.1016/j.tsf.2011.08.093 ↗
25. Application of indium zinc oxide window layers in Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2016.08.026 ↗
26. Sputtered indium zinc oxide rear electrodes for inverted semitransparent perovskite solar cells without using a protective buffer layer10.1016/j.orgel.2017.12.020 ↗
27. Highly efficient monolithic perovskite silicon tandem solar cells: analyzing the influence of current mismatch on device performance10.1039/C9SE00120D ↗
28. Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
29. Mechanical reliability of fullerene/tin oxide interfaces in monolithic perovskite/silicon tandem cells10.1021/acsenergylett.1c02148 ↗
30. Thickness dependence of the structural, electrical, and optical properties of amorphous indium zinc oxide thin films10.1016/j.jallcom.2017.12.062 ↗
31. Physical properties of indium zinc oxide and aluminium zinc oxide thin films deposited by radio-frequency magnetron sputtering
32. Effect of Li-doping on low temperature solution-processed indium–zinc oxide thin film transistors10.1016/j.tsf.2017.05.024 ↗
33. S. Lan, S. Yoon, H. Seok, H.U. Ha, D. Kang, H. Kim, Low-Temperature Deposited Highly Flexible In–Zn–V–O Transparent Conductive Electrode for Perovskite Solar Cells, ACS Applied Energy Materials, (2021).10.1021/acsaem.1c02771 ↗
34. Morphology changes of In-doped ZnO nanosheets via ZnCl2 and InCl3 vapor formation during thermal dissipation annealing process and improved UV photoresponse properties10.1016/j.jallcom.2021.160241 ↗
35. Characterization and device application of indium doped ZnO homojunction prepared by RF magnetron sputtering10.1016/j.optmat.2020.109723 ↗
36. The energy band tailored by Al incorporation in solution-processed IZO TFTs10.1039/C5RA01800E ↗
37. Fabrication of tantalum and nitrogen codoped ZnO (Ta, N-ZnO) thin films using the electrospay: twin applications as an excellent transparent electrode and a field emitter10.1021/am4003342 ↗
38. Influence of sputtering parameter on the optical and electrical properties of zinc-doped indium oxide thin films10.1116/1.1924473 ↗
39. Oxygen vacancy induced band-gap narrowing and enhanced visible light photocatalytic activity of ZnO10.1021/am300835p ↗
40. Preparation of a-IZO thin films by RF magnetron sputtering for Cu (In, Ga) Se2 solar cells
41. New figure of merit for transparent conductors10.1063/1.323240 ↗
42. A figure of merit to evaluate transparent conductor oxides for solar cells using photonic flux density10.1016/j.tsf.2015.12.038 ↗
43. Investigations aimed at producing 33% efficient perovskite–silicon tandem solar cells through device simulations10.1039/D1RA06250F ↗
44. Wolf, Recombination junctions for efficient monolithic perovskite-based tandem solar cells: physical principles, properties, processing and prospects10.1039/D0MH00990C ↗