Defect passivation via incorporation of sodium thiocyanate for achieving high-performance MAPbI3-based perovskite solar cells with enhanced stability
Source abstract
Abstract
The high density of defects in MAPbI 3 perovskite films brings about severe carrier nonradiative recombination, which lowers the photovoltaic performance and the stability of MAPbI 3 -based perovskite solar cells (PSCs). To tackle this issue, we prepared stable and efficient MAPbI 3 -based PSCs with incorporation of sodium thiocyanate (NaSCN). NaSCN can increase grain size and improve crystallization quality of the perovskite films due to an Ostwald ripening effect of SCN - and surface passivation of Na + which can effectively passivate the defect states and inhibit nonradiative recombination for an ultimate improvement of the device performance and stability. The excellent characteristics lead to a significant enhancement of the power conversion efficiency (PCE) from 18.1 % to 19.4 % both for MAPbI 3-based and Cs 0.06MA 0.15FA 0.79PbI 2.5Br 0.5 -based PSCs, respectively. The unencapsulated NaSCN-treated PSCs also shows a improved stability after aging under a relative humidity of 40 ± 5 % for 15 days.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Lead Iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
2. Best Reserch-Cell Efficiencies Chart, 〈https://www.nrel.gov/pv/cell-efficiency.html〉.
3. Engineering the hole extraction interface enables single-crystal MAPbI3 perovskite solar cells with efficiency exceeding 22% and superior indoor response10.1002/aenm.202103241 ↗
4. Semitransparent perovskite solar cells with enhanced light utilization efficiencies by transferable Ag nanogrid electrodes10.1021/acsami.1c14953 ↗
5. Benign pinholes in CsPbIBr2 absorber film enable efficient carbon-based, all-inorganic perovskite solar cells10.1021/acsaem.9b00944 ↗
6. Interlayer engineering for flexible large-area planar perovskite solar cells10.1021/acsaem.9b01924 ↗
7. γ-ray radiation on flexible perovskite solar cells10.1021/acsaem.0c00540 ↗
8. Efficient interface engineering of N, N′-Dicyclohexylcarbodiimide for stable HTMs-free CsPbBr3 perovskite solar cells with 10.16%-efficiency10.1016/j.cej.2021.131950 ↗
9. Healing soft interface for stable and high-efficiency all-inorganic CsPbIBr2 perovskite solar cells enabled by S-benzylisothiourea hydrochloride10.1016/j.cej.2021.132781 ↗
10. Multifunctional interface modifier ammonium silicofluoride for efficient and stable all-inorganic CsPbBr3 perovskite solar cells10.1016/j.cej.2021.134193 ↗
11. Guanidinium thiocyanate selective Ostwald ripening induced large grain for high performance perovskite solar cells10.1016/j.nanoen.2017.10.006 ↗
12. Efficient and stable CH3NH3PbI3−x(SCN)x planar perovskite solar cells fabricated in ambient air with low-temperature process10.1016/j.jpowsour.2017.11.070 ↗
13. Impact of monovalent cation halide additives on the structural and optoelectronic properties of CH3NH3PbI3 perovskite10.1002/aenm.201502472 ↗
14. Surface passivation of perovskite film by sodium toluenesulfonate for highly efficient solar cells10.1002/solr.202000113 ↗
15. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
16. Crystal growth engineering for high efficiency perovskite solar cells10.1039/C6CE00813E ↗
17. Understanding and eliminating hysteresis for highly efficient planar perovskite solar cells10.1002/aenm.201700414 ↗
18. Efficient (>20%) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts10.1002/anie.202102466 ↗
19. Facile surface homojunction reconstruction in halide perovskite solar cells10.1016/j.jallcom.2022.165442 ↗
20. Stability improvement of MAPbI3-based perovskite solar cells using a photoactive solid-solid phase change material10.1016/j.jallcom.2021.163142 ↗
21. Impedance spectroscopy study of defect/ion mediated electric field and its effect on the photovoltaic performance of perovskite solar cells based on different active layers10.1016/j.solmat.2021.111548 ↗
22. Additive engineering for high-performance room-temperature-processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes10.1039/C7EE02272G ↗
23. Methylammonium thiocyanate seeds assisted heterogeneous nucleation for achieving high-performance perovskite solar cells10.1016/j.apsusc.2022.153206 ↗
24. Enhanced performance and stability of ambient-processed CH3NH3PbI3−x(SCN)x planar perovskite solar cells by introducing ammonium salts10.1016/j.apsusc.2020.145790 ↗
25. Pseudohalide substitution and potassium doping in FA0.98K0.02Pb(SCN)2I for high-stability hole-conductor-free perovskite solar cells10.1016/j.jpowsour.2021.229781 ↗
26. Terbium-doped and dual-passivated γ-CsPb(I1−xBrx)3 inorganic perovskite solar cells with improved air thermal stability and high efficiency10.1002/adma.202203204 ↗
27. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity10.1038/ncomms11105 ↗
28. Synergistic effects of lead thiocyanate additive and solvent annealing on the performance of wide-bandgap perovskite solar cells10.1021/acsenergylett.7b00278 ↗
29. Constructing efficient and stable perovskite solar cells via interconnecting perovskite grains10.1021/acsami.7b08488 ↗
30. Facile NaF treatment achieves 20% efficient ETL-free perovskite solar cells10.1021/acsami.2c06110 ↗
31. Efficient and reproducible CH3NH3PbI3 perovskite layer prepared using a binary solvent containing a cyclic urea additive10.1021/acsami.7b18761 ↗
32. Passivation of grain boundary by Squaraine Zwitterions for defect passivation and efficient perovskite solar cells10.1021/acsami.8b22044 ↗
33. Advent of alkali metal doping: a roadmap for the evolution of perovskite solar cells10.1039/D0CS01316A ↗
34. NaCl-passivated and Na+-doped tin oxide electron transport layers enable highly efficient planar perovskite solar cells10.1016/j.jpcs.2021.110250 ↗
35. A sodium chloride modification of SnO2 electron transport layers to enhance the performance of perovskite solar cells10.1021/acsomega.1c01286 ↗
36. Enhanced planar perovskite solar cell performance via contact passivation of TiO2/perovskite interface with NaCl doping approach10.1021/acsaem.8b00602 ↗
37. The role of Na incorporation in the low-temperature processed CIGS thin film solar cells using post deposition treatment10.1016/j.jallcom.2015.10.181 ↗
38. Improved photovoltaic characteristics and grain boundary potentials of CuIn0.7Ga0.3Se2 thin films spin-coated by Na-dissolved nontoxic precursor solution10.1021/acsami.6b04407 ↗
39. Low-temperature growth of Na doped CIGS films on flexible polymer substrates by pulsed laser ablation from a Na containing target10.1016/j.surfcoat.2012.06.065 ↗
40. The influence of Na on metastable defect kinetics in CIGS materials10.1016/j.tsf.2008.10.140 ↗
41. The influence of Na on low temperature growth of CIGS thin film solar cells on polyimide substrates10.1016/j.tsf.2008.10.085 ↗
42. Constructing efficient and stable perovskite solar cells via interconnecting perovskite grains10.1021/acsami.7b08488 ↗
43. Naphthylmethylamine post-treatment of MAPbI3 perovskite solar cells with simultaneous defect passivation and stability improvement10.1016/j.solener.2021.03.016 ↗
44. Natural chlorophyll derivative assisted defect passivation and hole extraction for MAPbI3 perovskite solar cells with efficiency exceeding 20%
45. Impact of PbI2 passivation and grain size engineering in CH3NH3PbI3 solar absorbers as revealed by carrier-resolved photo-hall technique10.1002/aenm.201902706 ↗
46. Achieving efficient and stable perovskite solar cells in ambient air through non-halide engineering10.1002/aenm.202102169 ↗
47. High-conductivity thiocyanate ionic liquid interface engineering for efficient and stable perovskite solar cells10.1039/D2CC02354G ↗
48. Highly stable and efficient α-phase FA-based perovskite solar cells prepared in ambient air by strategically enhancing the interaction between ions in crystal lattices10.1039/D1SE00784J ↗
49. Mixed lead source precursors for producing light absorption layers of perovskite solar cells10.1039/D0RA08077B ↗
50. Organic dye passivation for high-performance all-inorganic CsPbI1.5Br1.5 perovskite solar cells with efficiency over 14%10.1002/aenm.202003585 ↗
51. Potassium thiocyanate-assisted enhancement of slot-die-coated perovskite films for high-performance solar cells10.1002/smsc.202000044 ↗
52. Inducing crystal-oriented growth while inhibiting grain boundary migration with multifunctional ionic liquid for high-efficiency perovskite solar cells
53. Compositional and morphological engineering of mixed cation perovskite films for highly efficient planar and flexible solar cells with reduced hysteresis10.1016/j.nanoen.2017.03.048 ↗
54. Additive engineering for efficient and stable MAPbI3-perovskite solar cells with an efficiency of over 21%10.1021/acsami.1c13136 ↗
55. Electron-hole diffusion lengths>175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
56. Thermodynamically self-healing 1D–3D hybrid perovskite solar cells10.1002/aenm.201703421 ↗
57. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
58. Heparin sodium interlayer anchoring TiO2 and MAPbI3 enhances trap passivation and device stability in perovskite solar cells10.1002/adma.201706924 ↗
59. Efficient and scalable perovskite solar cells achieved by buried interface engineering10.1039/D2TA04381E ↗
60. Low-cost star-shaped hole-transporting materials with isotropic properties and its application in perovskite solar cells10.1016/j.dyepig.2022.110695 ↗
61. Chlorobenzenesulfonic potassium salts as the efficient multifunctional passivator for the buried interface in regular perovskite solar cells10.1002/aenm.202200417 ↗