journal article·2023-01

Reactively sputtered CdS:O buffer layers for substrate Sb2Se3 solar cells

Yufan Liu, Bin Li, Xiaoyang Liang, Tao Liu, Shufang Wang, Zhiqiang Li

Publisher page

Abstract

Antimony selenide (Sb 2Se 3 ) is an emerging and promising photovoltaic material. High controllability for the energy level of buffer layers is greatly desirable for achieving higher performance Sb 2Se 3 solar cells due to the formation of heterojunction at the buffer/Sb 2Se 3 absorber interface. In this work, the CdS:O buffers were prepared by using a reactive sputtering technique including an Ar/O 2 mixture gas and a CdS ceramic target, and a composite buffer were fabricated with a structure of CBD-CdS (∼10 nm)/CdS:O. The interface damage induced by sputtering is investigated, and untra-thin CBD-CdS is performed to recover the plasma induced damage at the CdS:O/Sb 2Se 3 heterojunction interface. By optimizing the S/(S+O) composition ratio and the phase component of the composite buffer, wide band-gap buffer layers were achieved, and the device spectra response and device parameters J SC and V OC were improved. It was found that the composite CdS:O buffer optimizes the heterojunction interface band alignment and further efficiently reduce the interface recombination, enhanced the transfer and collection of photogenerated carriers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Solar cell efficiency tables (version 60)10.1002/pip.3595 ↗
2. Kesterite solar cells: insights into current strategies and challenges10.1002/advs.202004313 ↗
3. Potential role of kesterites in development of earth-abundant elements-based next generation technology10.1002/solr.202000815 ↗
4. Tin-selenide as a futuristic material: properties and applications10.1039/D0RA09807H ↗
5. Efficient nanostructured TiO2/SnS heterojunction solar cells10.1002/aenm.201901343 ↗
6. Disorder control enhances ultrathin solar cells10.1038/s41566-022-00965-5 ↗
7. Manipulating the morphology of CdS/Sb2S3 heterojunction using a Mg-doped tin oxide buffer layer for highly efficient solar cells10.1016/j.jechem.2021.08.029 ↗
8. 6.6 % efficient antimony selenide solar cells using grain structure control and an organic contact layer10.1016/j.solmat.2018.09.004 ↗
9. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
10. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells10.1021/am502427s ↗
11. Efficiency enhancement of Sb2Se3 thin-film solar cells by the co-evaporation of Se and Sb2Se310.7567/APEX.9.052302 ↗
12. Characterization of basic physical properties of Sb2Se3 and its relevance for photovoltaics10.1007/s12200-017-0702-z ↗
13. An effective combination reaction involved with sputtered and selenized Sb precursors for efficient Sb2Se3 thin film solar cells10.1016/j.cej.2020.124599 ↗
14. Solution-processed antimony selenide heterojunction solar cells10.1002/aenm.201301846 ↗
15. Sb2 Se3 thin-film solar cells exceeding 10 % power conversion efficiency enabled by injection vapor deposition technology10.1002/adma.202202969 ↗
16. Heterojunction annealing enabling record open-circuit voltage in antimony triselenide solar cells10.1002/adma.202109078 ↗
17. Orientation engineering in low-dimensional crystal-structural materials via seed screening10.1002/adma.201903914 ↗
18. Efficient and stable planar n-i-p Sb(2)Se(3)solar cells enabled by oriented 1D trigonal selenium structures10.1002/advs.202001013 ↗
19. Solution-processed SnO2 interfacial layer for highly efficient Sb2Se3 thin film solar cells10.1016/j.nanoen.2019.04.019 ↗
20. Improving the performance of Sb2Se3 thin film solar cells over 4 % by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗
21. X. Wu, R.G. Dhere, Y. Yan, I.J. Romero, Y. Zhang, J. Zhou, C. DeHart, A. Duda, C. Perkins, B. To, High-efficiency polycrystalline CdTe thin-film solar cells with an oxygenated amorphous cds (a-CdS:O) window layer, in: Twenty-Ninth IEEE Photovoltaic Specialists Conference, IEEE, New Orleans, LA, USA, 2002, pp. 531–534. https://doi.org/10.1109/pvsc.2002.1190619.10.1109/PVSC.2002.1190619 ↗
22. Bandgap tunable CdS:O as efficient electron buffer layer for high-performance Sb2Se3 thin film solar cells10.1016/j.solmat.2019.01.043 ↗
23. Identifying parasitic current pathways in CIGS solar cells by modelling dark J–V response10.1002/pip.2582 ↗
24. 9.2 %-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
25. Evolution of oxygenated cadmium sulfide (CdS:O) during high-temperature CdTe solar cell fabrication10.1016/j.solmat.2016.05.038 ↗
26. Optimization of CdTe thin‐film solar cell efficiency using a sputtered, oxygenated CdS window layer10.1002/pip.2578 ↗
27. Properties of reactively sputtered oxygenated cadmium sulfide (CdS:O) and their impact on CdTe solar cell performance10.1116/1.4903214 ↗
28. Interface engineering via sputtered oxygenated CdS:O window layer for highly efficient Sb2Se3 thin-film solar cells with efficiency above 7 %10.1002/solr.201900225 ↗
29. Efficiency improvement of flexible Sb2Se3 solar cells with non-toxic buffer layer via interface engineering10.1016/j.nanoen.2020.104577 ↗
30. Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV10.1016/j.nanoen.2020.104806 ↗
31. Improvement in Sb2Se3 solar cell efficiency through band alignment engineering at the buffer/absorber interface10.1021/acsami.8b17611 ↗
32. Sb2Se3 thin film solar cells in substrate configuration and the back contact selenization10.1016/j.solmat.2016.11.033 ↗
33. Crystallographic orientation control of 1D Sb2Se3 nanorod arrays for photovoltaic application by in situ back-contact engineering10.1002/solr.202000294 ↗
34. Characterization of sulfur bonding in CdS:O buffer layers for CdTe-based thin-film solar cells10.1021/acsami.5b03503 ↗
35. Fabrication of high efficiency sputtered CdS:O/CdTe thin film solar cells from window/absorber layer growth optimization in magnetron sputtering10.1016/j.solmat.2017.08.020 ↗
36. Influence of oxygen on structural and optoelectronic properties of CdS thin film deposited by magnetron sputtering technique10.1016/j.cjph.2020.06.010 ↗
37. Facile synthesis of high-quality nano-sized CdS hollow spheres and their application in electrogenerated chemiluminescence sensing10.1039/B614203F ↗
38. Resonant and polarized Raman scattering from single CdS/CdSe core-shell nanowires10.1088/0022-3727/47/13/135104 ↗
39. Nanotwinning and structural phase transition in CdS quantum dots10.1186/1556-276X-7-584 ↗
40. Sputtered cadmium sulfide (CdS) buffer layer for kesterite and chalcogenide thin film solar cell (TFSC) applications10.1166/jnn.2020.17528 ↗
41. Raman and infrared spectroscopic investigation of contact ion pair formation in aqueous cadmium sulfate solutions10.1007/BF00972713 ↗
42. Heterogeneous microchemistry between CdSO4 and CaCO3 particles under humidity and liquid water10.1016/j.jhazmat.2013.01.029 ↗
43. Zn-Se-Cd-S interlayer formation at the CdS/Cu2ZnSnSe4 thin-film solar cell interface10.1021/acsenergylett.7b00140 ↗
44. Characterization of sulfur bonding in CdS:O buffer layers for CdTe-based thin-film solar cells10.1021/acsami.5b03503 ↗
45. Properties of reactively sputtered oxygenated cadmium sulfide (CdS:O) and their impact on CdTe solar cell performance10.1116/1.4903214 ↗
46. One-pot synthesis of soluble nanoscale CIGS photoactive functional materials10.1007/s11671-007-9108-y ↗
47. Solution-processed Sb2S3 planar thin film solar cells with a conversion efficiency of 6.9 % at an open circuit voltage of 0.7 V achieved via surface passivation by a SbCl3 interface layer10.1021/acsami.9b15148 ↗
48. On the stability of operation of antimony sulfide selenide thin film solar cells under solar radiation10.1002/pssa.201800479 ↗
49. Annealing-free efficient vacuum-deposited planar perovskite solar cells with evaporated fullerenes as electron-selective layers10.1016/j.nanoen.2015.11.008 ↗
50. Quasiepitaxy strategy for efficient full-inorganic Sb2S3 solar cells10.1002/adfm.201901720 ↗
51. 5.91 %-efficient Sb2Se3 solar cells with a radio-frequency magnetron-sputtered CdS buffer layer10.1016/j.apmt.2019.06.001 ↗
52. Investigation of sputtering damage around pn interfaces of Cu(In,Ga)Se2 solar cells by impedance spectroscopy10.1016/j.electacta.2014.04.058 ↗
53. Estimation of defect activation energy around pn interfaces of Cu(In,Ga)Se2solar cells using impedance spectroscopy10.7567/JJAP.55.012301 ↗
54. Interface electric properties of Si/organic hybrid solar cells using impedance spectroscopy analysis10.7567/JJAP.55.056601 ↗
55. F.J.J. Pern, Noufi, Rommel, Characterization of damp-heat degradation of CuInGaSe2 solar cell components and devices by (electrochemical) impedance spectroscopy, in: N. Dhere, Wohlgemuth, JH, Lynn, KW (Ed.) Conference on Reliability of Photovoltaic Cells, Modules, Components and Systems IV, San Diego, CA, 2011. 〈https://doi.org/10.1117/12.895918〉.10.1117/12.895918 ↗
56. Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film
57. Accelerated optimization of TiO2/Sb2Se3 thin film solar cells by high-throughput combinatorial approach