Understanding electromigration failure behaviors of narrow cobalt lines and the mechanism of reliability enhancement for extremely dilute alloying of manganese oxide

Self-forming barriers for copper (Cu) interconnect metallization are well developed. However, the self-forming-barrier process and associated electromigration behaviors of narrow lines of cobalt (Co), a new interconnect wiring material for sub-10-nm semiconductor device nodes, are yet to be explored. In this study, we present an all-wet electroless trench-filling process to fabricate narrow (100 nm) lines of Co and MnO-added Co [Co(MnO)], then thermally annealed to some extent (400 °C/30 min) prior to electromigration testing. Empirical data obtained from accelerated electromigration testing, including failure lifetimes, current-density scaling factors, activation energies and physical failure profiles, consistently show that electromigration reliability of the Co lines is markedly enhanced by 0.1% added MnO. Transmission electron microscopy and focused ion beam imaging, along with dynamic adhesion strength data, reveal that the enhancement is related to annealing-induced segregation and dispersion of MnO particles at the interface with SiO ₂, ensuring adhesion of Co on SiO ₂ , preventing interfacial interdiffusion and stuffing electromigration pathways. The adhesion strength, microstructures and Joule-heating data of Co and Co(MnO) are provided for the discussion of the differences in their electromigration performance and failure mechanism. Comments on electroless-plated Co as a new interconnect material are also given.