journal article·2023-04

Effects of Al content on microstructure and tensile properties of Ni-based ODS superalloys

Li Yu, Zheng Lu, Jiabei Xian, Xuanyu Chen, Shibo Peng, Xiaolong Li, Hui Li

Publisher page

Abstract

Two kinds of Ni-based oxide dispersion strengthening (ODS) superalloys with high/low Al contents, ODS-HA (Ni-20Cr-4.5Al-0.5Ti-0.6Y 2O 3-0.6Zr, wt%) and ODS-LA (Ni-20Cr-0.3Al-0.5Ti-0.6Y 2O 3 -0.6Zr), were manufactured by mechanical alloying and hot isostatic pressing to investigate the effects of Al content on microstructure and tensile property. The results showed that ODS-HA is strengthened by both Ni 3 Al precipitates and nanoscale oxides together with refined grain size, and ODS-LA is strengthened mainly by nanoscale oxides. Type and size of nanoscale oxides depend on Al content. Y 4Zr 3O 12, Y 2TiO 5 , monoclinic Y 4Al 2O 9 (YAM), hexagonal YAlO 3 (YAH) and YAlO 3 perovskite (YAP) are observed in ODS-LA while only Y 4Zr 3O 12 and YAP are found in ODS-HA. This causes the change of size and number density of oxides in two kinds of ODS alloys. High Al content results in increased tensile strength and decreased ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Fusion materials and technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Microstructural characterization of a new mechanically alloyed Ni-base ODS superalloy powder10.1016/j.matchar.2014.12.008 ↗
2. Selected Area Electron Diffraction, a technique for determination of crystallographic texture in nanocrystalline powder particle of Alloy 617 ODS and comparison with Precession Electron Diffraction10.1016/j.matchar.2019.109883 ↗
3. Microstructural investigation of oxide dispersion strengthened alloy 617 after creep rupture at high temperature10.1016/j.matchar.2018.02.031 ↗
4. The formation of the complex oxide in Ni-based alloy powder during mechanical milling and heat treatment10.1016/j.jallcom.2021.160333 ↗
5. Microstructure and mechanical properties of ODS Ni-based superalloy foil produced by EB-PVD10.1016/j.jallcom.2007.11.122 ↗
6. The microstructure and mechanical properties of Al-containing 9Cr ODS ferritic alloy10.1016/j.jallcom.2015.06.214 ↗
7. Microstructure characterization and tensile properties of 18Cr-4Al-oxide dispersion strengthened ferritic steel10.1016/j.jallcom.2015.06.248 ↗
8. Nano oxide particles in 18Cr oxide dispersion strengthened (ODS) steels with high yttria contents10.1016/j.matchar.2022.111936 ↗
9. Evolution of ultrafine grained microstructure and nano-sized semi-coherent oxide particles in austenitic oxide dispersion strengthened steel10.1016/j.matchar.2016.04.022 ↗
10. Effect of Y/Ti atomic ratio on microstructure of oxide dispersion strengthened alloys10.1016/j.matchar.2017.10.004 ↗
11. Microstructural development of a heavily neutron-irradiated ODS ferritic steel (MA957) at elevated temperature10.1016/j.jnucmat.2007.03.145 ↗
12. Development of 9Cr-ODS martensitic steel claddings for fuel pins by means of ferrite to austenite phase transformation10.1080/18811248.2002.9715260 ↗
13. Effects of contents of Al, Zr and Ti on oxide particles in Fe–15Cr–2W–0.35Y2O3 ODS steels10.1016/j.jnucmat.2020.152025 ↗
14. Effects of aluminum on microstructure and mechanical behavior of 14Cr–ODS steels10.1016/j.jnucmat.2014.12.079 ↗
15. Effects of Zr addition on the microstructure of 14%Cr4%Al ODS ferritic steels10.2320/matertrans.MBW200923 ↗
16. Effect of hafnium addition on the microstructure and tensile properties of aluminum added high-Cr ODS steels10.1016/j.jallcom.2017.01.298 ↗
17. Refinement of oxide particles by addition of Hf in Ni-0.5 mass%Al-1 mass% Y2O3 alloys10.2320/matertrans.M2010163 ↗
18. Improvement of high temperature mechanical properties of Ni-based oxide dispersion strengthened alloys by preferential formation of Y-Ti-O complex oxide10.1016/j.msea.2018.10.004 ↗
19. Effect of Al/Ti ratio on γ′ and oxide dispersion strengthening in Ni-based ODS superalloys10.1016/j.msea.2022.143240 ↗
20. Evolution of γ/γ' phases, their misfit and volume fractions in Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy10.1016/j.matchar.2019.06.009 ↗
21. Microstructure characterisation and mechanical properties of ODS Eurofer steel subject to designed heat treatments10.1016/j.msea.2019.138568 ↗
22. Martin, W.J., Micromechanisms in particle-hardened alloys, Micromechanisms in particle-hardened alloys, 1980.
23. Directional recrystallization by zone annealing in a Ni-based ODS superalloy10.1016/j.jallcom.2018.01.406 ↗
24. Annealing behavior of the ODS nickel-based superalloy PM 100010.1016/j.msea.2003.11.052 ↗
25. Competition between recovery and recrystallization10.1016/S0921-5093(01)01860-3 ↗
26. Evaluation of processing conditions on the γ′ morphology of an oxide dispersion strengthened Ni-based superalloy10.1002/adem.202000559 ↗
27. Examination of the Zener relationship between grain size and particle dispersion10.2320/matertrans1989.38.950 ↗
28. Re-precipitation mechanisms of the γ′ phase with sphere, near-sphere, cubic, octets and finally-dendrite in as-cast Ni-based superalloys10.1016/j.jallcom.2021.160104 ↗
29. Kinetics and Mechanisms of γ′ Reprecipitation in a Ni-based Superalloy10.1038/srep28650 ↗
30. Accuracy of density functional theory in predicting formation energies of ternary oxides from binary oxides and its implication on phase stability10.1103/PhysRevB.85.155208 ↗
31. Hydrocarbon retention in lacustrine shales during thermal maturation: Insights from semi-open system pyrolysis10.1016/j.petrol.2019.106480 ↗
32. L. Yang, J. Feng, X. Zhao, H. Zhao, Oil shale horizontal pyrolyzing system, has tail-gas discharge outlet connected with lower end of drying pre-heating chamber for flowing tail-gas from bottom portion to top portion in drying pre-heating chamber, in.
33. The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys—with special reference to the new γ′-hardened cobalt-base superalloys10.1016/j.actamat.2014.08.005 ↗
34. Oxide dispersion strengthened nickel based alloys via spark plasma sintering10.1016/j.msea.2015.01.066 ↗
35. Multi-component solid solution hardening10.1007/BF00540987 ↗
36. Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation10.1016/j.msea.2014.04.054 ↗
37. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver
38. Mughrabi · 1993
39. Effect of rare earth oxide addition on microstructure and mechanical properties of Ni-based alloy10.1016/j.jallcom.2020.156980 ↗
40. Effect of environment on the mechanical behavior of Ni–20Cr thin strip10.1016/S0921-5093(00)01319-8 ↗
41. Effects of annealing temperature on nanoscale particles in oxide dispersion strengthened Fe-15Cr alloy powders with Ti and Zr additions10.1016/j.jallcom.2016.09.133 ↗
42. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
43. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
44. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
45. High-temperature strength characterization of advanced 9Cr-ODS ferritic steels10.1016/j.msea.2008.04.126 ↗
46. Tensile properties and deformation mechanisms of a 14Cr ODS ferritic steel10.1016/j.jnucmat.2010.07.027 ↗
47. Bimodal-grained high-strength nickel-base ODS alloy fabricated by mechanical alloying and hot extrusion
48. Tensile properties and temperature-dependent yield strength prediction of GH4033 wrought superalloy10.1016/j.msea.2016.08.105 ↗