journal article·2021-02

Low ligand field strength ion (I−) mediated 1D inorganic material MoI3: Synthesis and application to photo-detectors

Kyung Hwan Choi, Seungbae Oh, Sudong Chae, Byung Joo Jeong, Bum Jun Kim, Jiho Jeon, Sang Hoon Lee, Sang Ok Yoon, Chaeheon Woo, Xue Dong, Asghar Ghulam, Changmo Lim, Zhixiang Liu, Cong Wang, Ali Junaid, Jae-Hyun Lee, Hak Ki Yu, Jae-Young Choi

Publisher page

Abstract

Abstract A new type of 1D inorganic material, MoI3, which can be separated into individual 1D chains, was synthesized through a vapor transport reaction between molybdenum and iodine. High-purity and centimeter-scale large MoI3 crystals were obtained by controlling the growth temperature and the stoichiometric ratio between molybdenum and iodine. Their semiconductor characteristics were confirmed by measuring the electrical conductivity as a function of temperature (conductivity increased with increased temperature across the range −70 to 30 °C). Furthermore, it was confirmed that MoI3 with a 1.27 eV band gap can be separated to a few nanometer scale through mechanical and chemical exfoliation methods and can be used as a photodetector in the near IR (less than 1000 nm)-to-visible light region. This novel 1D material is expected to play an important role in the development of additional low-dimensional materials and in advanced nano-optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 2D Materials and Applications · MXene and MAX Phase Materials · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Atomically thin MoS 2: a new direct-gap semiconductor10.1103/PhysRevLett.105.136805 ↗
2. Preparation and applications of mechanically exfoliated single-layer and multilayer MoS2 and WSe2 nanosheets10.1021/ar4002312 ↗
3. Role of metal contacts in designing high-performance monolayer n-type WSe2 field effect transistors10.1021/nl304777e ↗
4. Synthesis of MoS2 and MoSe2 films with vertically aligned layers10.1021/nl400258t ↗
5. Air-stable monodispersed Mo6S3I6 nanowires10.1088/0957-4484/15/5/039 ↗
6. Synthesis of a one-dimensional atomic crystal of vanadium selenide (V 2 Se 9)10.1039/C8RA06398B ↗
7. Inorganic molecular chain Nb2Se9: synthesis of bulk crystal and one-atom-thick level exfoliation10.1002/pssr.201800451 ↗
8. Design of dispersant structures for preparing highly concentrated one-dimensional inorganic molecular chains from V 2 Se 9 crystals10.1039/C8CC06767H ↗
9. Single-layer MoS 2 transistors10.1038/nnano.2010.279 ↗
10. High-mobility transport anisotropy and linear dichroism in few-layer black phosphorus10.1038/ncomms5475 ↗
11. Isolation and characterization of few-layer black phosphorus10.1088/2053-1583/1/2/025001 ↗
12. Large-area synthesis of van der Waals two-dimensional material Nb3I8 and its infrared detection applications10.1016/j.jallcom.2020.154877 ↗
13. Ligand field theory of square-planar platinum (II) complexes10.1021/ic50003a001 ↗
14. Spectroscopic, electrochemical, and photochemical properties of molybdenum (II) and tungsten (II) halide clusters10.1021/ja00345a034 ↗
15. Studies on metal carboxylates. 13. A high-yield synthesis of rhenium (III) iodide and the isolation and characterization of. beta.-molybdenum (II) iodide10.1021/ic50179a040 ↗
16. The influence OF PI-stabilized unsaturation and filled
17. Spectroscopic assessment of the degree of. pi.-stabilization of unsaturation in ruthenium complex, RuH (X) CO (P-tert-Bu2Me) 210.1021/ic00041a004 ↗
18. Steric effects of phosphorus ligands in organometallic chemistry and homogeneous catalysis10.1021/cr60307a002 ↗
19. Transition-metal fluoro compounds containing carbonyl, phosphine, arsine, and stibine ligands10.1021/cr00004a005 ↗
20. Ligand and metal effects on the enthalpies of protonation of Cp’M (PR3)(PR’3) X complexes (M= ruthenium or osmium)10.1021/ja00069a028 ↗
21. Halide effects in transition metal catalysis10.1002/1521-3773(20020104)41:1<26::AID-ANIE26>3.0.CO;2-9 ↗
22. About trihalides with TiI3 chain structure: proof of pair forming of cations in β-RuCl3 and RuBr3 by temperature dependent single crystal X-ray analyses10.1002/zaac.200400106 ↗
23. Dimensional diversity in transition metal trihalides10.1021/ic00060a025 ↗
24. Mechanical exfoliation and characterization of single-and few-layer nanosheets of WSe2, TaS2, and TaSe210.1002/smll.201202919 ↗
25. 2D materials via liquid exfoliation: a review on fabrication and applications10.1007/s11434-015-0936-3 ↗
26. Isolation of Nb2Se9 molecular chain from bulk one-dimensional crystal by liquid exfoliation10.3390/nano8100794 ↗
27. Exfoliation and characterization of V2Se9 atomic crystals10.3390/nano8090737 ↗
28. Facile way of synthesis for molybdenum iodides10.1021/acs.inorgchem.6b02229 ↗
29. Molybdenum iodides–from obscurity to bright luminescence10.1002/ejic.201900630 ↗
30. Microstructure, growth mechanism and anisotropic resistivity of quasi-one-dimensional ZrTe5 crystal10.1016/j.jcrysgro.2016.04.042 ↗
31. Tailored synthesis of Zn–N co-doped porous MoC nanosheets towards efficient hydrogen evolution10.1039/C8NR07463A ↗
32. Emerging in-plane anisotropic two-dimensional materials
33. Two-dimensional heterostructure promoted infrared photodetection devices
34. Growth of ultrathin ternary teallite (PbSnS2) flakes for highly anisotropic optoelectronics10.1016/j.matt.2020.01.013 ↗
35. Achieving highly uniform two-dimensional PbI2 flakes for photodetectors via space confined physical vapor deposition10.1016/j.scib.2017.11.011 ↗
36. Bolometric effect in Bi2O2Se photodetectors10.1002/smll.201904482 ↗