journal article·2020-10

Multistep electrophoretic deposition of TiO2 film and its surface modification for dye sensitized solar cells

Sehar Shakir, Hafiz M. Abd-ur-Rehman, Rehan Zahid, Mitsumasa Iwamoto, Vengadesh Periasamy

Publisher page

Abstract

Abstract TiO2 is a wide bandgap semiconductor commonly used as a photoanode material in dye sensitized solar cells (DSSCs). However, low absorption of TiO2 in visible range of solar spectrum limits its performance in DSSCs. A multistep electrophoretic deposition (EPD) process was used to improve the morphology of the mesoporous films and high quality TiO2 films were fabricated. Meanwhile, the optical absorbance was enhanced by a convenient and simple surface modification method using tin (Sn). The prepared films were subjected to morphological, optical, elemental, and phase analyses. It was observed that multistep EPD produced high quality films at various electric fields. Moreover, the surface modification was achieved using sonochemical deposition of Sn+ on the film which enhanced its photo-absorption. The current density (J) versus voltage (V) characteristics of Sn/TiO2 film deposited at 20 V based DSSC showed approximately twofold increase in the efficiency of the solar cells. Improved open-circuit voltage (Voc), short-circuit current density (Jsc) and efficiency (η) of the DSSCs as well as significantly high fill factor indicated that the surface modified EPD film is a potential candidate as a photoanode film in DSSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Electrophoretic Deposition in Materials Science · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte10.1039/B209322G ↗
2. Electro-catalytic and structural studies of DNA templated gold wires on platinum/ITO as modified counter electrode in dye sensitized solar cells10.1007/s10854-017-8411-3 ↗
3. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
4. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
5. Stable dynamics performance and high efficiency of ABX3-type super-alkali perovskites first obtained by introducing H5O2 cation10.1002/aenm.201900664 ↗
6. Performance improvement of perovskite solar cells through enhanced hole extraction: the role of iodide concentration gradient10.1016/j.solmat.2018.05.025 ↗
7. Two-dimensional lead-free hybrid halide perovskite using superatom anions with tunable electronic properties10.1016/j.solmat.2018.10.021 ↗
8. Efficient solar cells sensitized by a promising new type of porphyrin: dye-aggregation suppressed by double strapping10.1039/C8SC04969F ↗
9. Effect of MgO surface modification on the TiO2 nanowires electrode for self-powered UV photodetectors10.1021/acssuschemeng.7b04188 ↗
10. Hydrothermal synthesis of high electron mobility Zn-doped SnO2 nanoflowers as photoanode material for efficient dye-sensitized solar cells10.1021/cm201366z ↗
11. Elevated temperature anodized Nb2O5: a photoanode material with exceptionally large photoconversion efficiencies10.1021/nn300408p ↗
12. Facile synthesis of chrysanthemum flowers-like TiO2 hierarchical microstructures assembled by nanotube for high performance dye-sensitized solar cells10.1016/j.orgel.2018.01.012 ↗
13. Highly luminescent S, N co-doped graphene quantum dots with broad visible absorption bands for visible light photocatalysts10.1039/c3nr04402e ↗
14. Two-stepsol− gel method-based TiO2 nanoparticles with uniform morphology and size for efficient photo-energy conversion devices10.1021/cm902842k ↗
15. Electrospun TiO2 electrodes for dye-sensitized solar cells10.1088/0957-4484/15/12/030 ↗
16. Development of copper doped titania based photoanode and its performance for dye sensitized solar cell applications10.1016/j.jallcom.2015.08.243 ↗
17. Low-temperature fabrication of dye-sensitized plastic electrodes by electrophoretic preparation of mesoporous TiO2 layers10.1149/1.1796931 ↗
18. Three-dimensional electrodes for dye-sensitized solar cells: synthesis of indium–tin-oxide nanowire arrays and ITO/TiO2 core–shell nanowire arrays by electrophoretic deposition10.1088/0957-4484/20/5/055601 ↗
19. Optimizing photovoltaic performance in CuInS2 and CdS quantum dot-sensitized solar cells by using an agar-based gel polymer electrolyte10.1039/C6RA27635K ↗
20. Electrophoretic deposition of chitosan-based composite coatings for biomedical applications: a review10.1016/j.pmatsci.2019.01.001 ↗
21. Fabrication of highly efficient flexible dye-sensitized solar cells10.1016/j.jallcom.2010.02.044 ↗
22. A simple electrophoretic deposition method to prepare TiO2–B nanoribbon thin films for dye-sensitized solar cells10.1016/j.tsf.2010.08.104 ↗
23. Electrophoretically deposited TiO2 photo-electrodes for use in flexible dye-sensitized solar cells10.1016/j.jphotochem.2004.12.023 ↗
24. Modified multistep electrophoretic deposition of TiO2 nanoparticles to prepare high quality thin films for dye-sensitized solar cell10.1007/s10853-012-6484-1 ↗
25. Effect of Cu and Mn amounts doped to TiO2 on the performance of DSSCs10.1016/j.solener.2019.12.043 ↗
26. Synthesis, characterization, and application of transition metals (Ni, Zr, and Fe) doped TiO2 photoelectrodes for dye-sensitized solar cells10.1016/j.molliq.2019.112177 ↗
27. Novel synergistic combination of Cu/S co-doped TiO2 nanoparticles incorporated as photoanode in dye sensitized solar cell10.1016/j.solener.2020.04.043 ↗
28. 300 keV cobalt ions irradiations effect on the structural, morphological, optical and photovolatic properties of Zn doped TiO2 thin films based dye sensitized solar cells10.1016/j.ceramint.2020.03.256 ↗
29. Sn-doped TiO2 photoanode for dye-sensitized solar cells10.1021/jp212517k ↗
30. Electrophoretic deposition of titanium oxide nanoparticle films for dye-sensitized solar cell applications
31. Annealing effects on the crystallite size and dielectric properties of ultrafine Ba1− x Srx TiO3 (0< x< 1) powders synthesized through an oxalate-complex precursor10.1039/B506578J ↗
32. Understanding the effect of surface/bulk defects on the photocatalytic activity of TiO2: anatase versus rutile10.1039/c3cp50927c ↗
33. Quantification of phase content in TiO2 thin films by Raman spectroscopy
34. Raman spectroscopy: a new approach to measure the percentage of anatase TiO2 exposed (001) facets10.1021/jp301256h ↗
35. A polymer gel electrolyte composed of a poly (ethylene oxide) copolymer and the influence of its composition on the dynamics and performance of dye-sensitized solar cells10.1016/j.jpowsour.2009.09.008 ↗
36. Fabrication of un-doped and magnesium doped TiO2 films by aerosol assisted chemical vapor deposition for dye sensitized solar cells10.1016/j.jallcom.2017.12.165 ↗
37. Enhanced photocatalytic activity of powders (P25) via calcination treatment10.1155/2012/265760 ↗
38. Surface modification of aerosol-assisted CVD produced TiO2 thin film for dye sensitised solar cell10.1155/2014/586707 ↗
39. Photodegradation of pharmaceutical drugs using Sn-modified TiO2 powders under visible light irradiation10.1016/j.fuel.2017.01.059 ↗
40. Preparation of crystalline Sn-doped TiO2 and its application in visible-light photocatalysis10.1155/2011/432947 ↗
41. Large-scale synthesis of single-crystal rutile SnO2 nanowires by oxidizing SnO nanoparticles in flux10.1016/j.jcrysgro.2007.10.040 ↗
42. Synthesis and photocatalytic properties of Sn-doped TiO2 nanotube arrays10.1016/j.jallcom.2009.04.027 ↗
43. Effect of Fe-doped TiO2 nanoparticle derived from modified hydrothermal process on the photocatalytic degradation performance on methylene blue10.1016/j.jhazmat.2007.11.095 ↗
44. Effect of TiO2 microbead pore size on the performance of DSSCs with a cobalt based electrolyte10.1039/C4NR04436C ↗