Laser processing as a tool for designing donor-substituted calcium manganite-based thermoelectrics
Source abstract
Abstract
Abstract In this work, the laser floating zone technique (LFZ) for donor-substituted calcium manganite-based thermoelectrics were assessed using Ca1-xPrxMnO3 (x = 0.03, 0.06, 0.1) as a model system. Fibres were grown by LFZ with pulling rates of 25, 100 and 200 mm h−1 in various atmospheres (air, vacuum and argon). Strongly non-equilibrium conditions imposed by LFZ promoted the formation of impurities in (Ca, Pr)MnO3 ceramic fibres, in several cases possessing dendritic structures. The results clearly indicate that careful optimization of the laser processing conditions is needed to produce the manganites with reasonable thermoelectric performance. Negative effects of the phase impurities, promoted by LFZ, on the transport properties can be minimized by additional heat treatment of the laser-processed fibres. The guidelines suggest that LFZ is a suitable technique for processing of thermoelectric perovskite-type manganites if optimized control over growth parameters and re-equilibration conditions is imposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Thermoelectric materials: energy conversion between heat and electricity
2. New and old concepts in thermoelectric materials10.1002/anie.200900598 ↗
3. Realising the potential of thermoelectric technology: a Roadmap
4. An inconvenient truth about thermoelectrics TL - 810.1038/nmat2361 ↗
5. Recent aspects of oxide thermoelectric materials for power generation from mid-to-high temperature heat source10.2109/jcersj2.119.770 ↗
6. Boosting the thermoelectric performance of (Na,K)-Codoped polycrystalline SnSe by synergistic tailoring of the band structure and atomic-scale defect phonon scattering10.1021/jacs.7b05339 ↗
7. Band structure engineering through orbital interaction for enhanced thermoelectric power factor10.1063/1.4866861 ↗
8. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
9. Thermal conductivity of electron-doped CaMnO3perovskites: local lattice distortions and optical phonon thermal excitation10.1016/j.actamat.2010.07.052 ↗
10. Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg2Si1-xSnxsolid solutions10.1103/PhysRevLett.108.166601 ↗
11. Band engineering and rational design of high-performance thermoelectric materials by first-principles10.1016/j.jmat.2016.05.004 ↗
12. Complex thermoelectric materials10.1038/nmat2090 ↗
13. Phase formation, stability, and oxidation in (Ti, Zr, Hf)NiSn half-Heusler compounds
14. Material and manufacturing cost considerations for thermoelectrics10.1016/j.rser.2013.12.030 ↗
15. Thermoelectric properties of the Ca1−x R x MnO3 perovskite system (R: Pr, Nd, Sm) for high-temperature applications10.1007/s11664-010-1446-3 ↗
16. Effects of praseodymium doping on thermoelectric transport properties of CaMnO3 compound system10.1016/S1002-0721(12)60374-3 ↗
17. Electrical conductivity and Seebeck coefficient of (La, Ca) (Cr, Co)O310.1007/BF00541609 ↗
18. New method to improve the grain alignment and performance of thermoelectric ceramics10.1016/j.matlet.2012.05.131 ↗
19. New environmentally friendly Ba-Fe-O thermoelectric material by flexible laser floating zone processing10.1016/j.scriptamat.2017.10.011 ↗
20. Thermoelectric properties of La3+ and Ce3+ co-doped CaMnO3 prepared by tape casting10.1016/j.jeurceramsoc.2019.08.021 ↗
21. Enhanced thermoelectric property of nanostructured CaMnO3 by sol-gel hydrothermal method10.1016/j.physb.2019.411707 ↗
22. Thermoelectric properties of non-stoichiometric CaMnO3-δ composites formed by redox-activated exsolution10.1016/j.jeurceramsoc.2019.11.027 ↗
23. Laser-heated floating zone production of single-crystal fibers
24. Growth rate effects on the thermoelectric performance of CaMnO3-based ceramics10.1016/j.jeurceramsoc.2019.06.011 ↗
25. Thermoelectric properties of Bi, Nb co-substituted CaMnO3at high temperature10.1016/j.jallcom.2009.08.012 ↗
26. Effect of A- or B-site doping of perovskite calcium manganite on structure, resistivity, and thermoelectric properties10.1111/jace.15015 ↗
27. Improved thermoelectric performance in Pr and Sr Co-doped CaMnO3 materials10.1016/j.jallcom.2019.07.188 ↗
28. High Tc superconducting fibers processed by conventional and electrical assisted laser floating zone
29. Amaral · 2018 · 199
30. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
31. Formation mechanism of grown-in defects in CZ silicon crystals based on thermal gradients measured by thermocouples near growth interfaces10.1016/S0921-5107(99)00428-6 ↗
32. 2012
33. Oxygen reduction reaction at LaxCa1-xMnO3nanostructures: interplay between A-site segregation and B-site valency10.1039/C6CY01105E ↗
34. Porous calcium-manganese oxide microspheres for electrocatalytic oxygen reduction with high activity10.1039/C2SC21475J ↗
35. Nonstoichiometry and reductive decomposition of CaMnO3-δ10.1016/j.ssi.2004.07.001 ↗
36. Unusual redox behaviour of the magnetite/hematite core-shell structures processed by the laser floating zone method10.1039/C7DT04775D ↗
37. Magnetite/hematite core/shell fibres grown by laser floating zone method10.1016/j.apsusc.2013.01.108 ↗
38. Diffusion phenomena and crystallization path during the growth of LFZ Bi-Sr-Ca-Cu-O superconducting fibres10.1088/0953-2048/14/11/305 ↗
39. Microstructure, interfaces and magnetic behaviour of thick Ag/BSCCO composite fibres10.1016/0921-4534(94)90879-6 ↗
40. High temperature metal-insulator transition induced by rare-earth doping in perovskite CaMnO310.1021/jp809049s ↗
41. Recent development of n-type perovskite thermoelectrics
42. Phase diagram updates
43. High-temperature thermoelectric properties of Ca1-xPrxMnO3-δ(0≤x<1)10.1016/j.physb.2004.06.033 ↗
44. Magnetic, transport, and thermodynamic properties of CaMn2 O4 single crystals10.1103/PhysRevB.79.104427 ↗
45. High-temperature thermoelectric property of layered La2-2xCa1+2xMn2O7 Manganites (0.75 ≤ x ≤ 1.0)10.1143/JJAP.50.041101 ↗
46. Structural, electronic and thermoelectric behaviour of CaMnO3and CaMnO(3-δ)10.1039/C4TA01514B ↗
47. A study on PrMnO3-based perovskite oxides used in SOFC cathodes10.1016/S0925-8388(02)00411-5 ↗
48. Seebeck coefficient of Ca1–xPrxMnO3–δ paramagnetic manganites10.1134/S0020168517060097 ↗
49. Tunable thermoelectric properties of Ca0.9Yb0.1MnO3through controlling the particle size via ball mill processing10.1016/j.ceramint.2014.08.033 ↗
50. Role of Bi doping in thermoelectric properties of CaMnO310.1016/j.jallcom.2014.12.141 ↗