journal article·2017-09

Constructing aligned single-crystalline TiO 2 nanorod array photoelectrode for PbS quantum dot-sensitized solar cell with high fill factor

Ru Zhou, Yuanzhang Huang, Lei Wan, Haihong Niu, Fengwei Ji, Jinzhang Xu

Publisher page

Abstract

Abstract Low bandgap PbS quantum dots (QDs) have attracted special interests serving as promising sensitizers for developing high performance near-infrared responsive photovoltaics. However, the commonly studied successive ionic layer adsorption and reaction (SILAR) processed PbS QD-sensitized solar cells (QDSCs) constructed with mesoporous TiO 2 nanoparticle-photoelectrodes generally experience poor fill factor (FF) values lower than 0.50, arising from severe interfacial charge recombination because of the structural disorder of nanoparticles. This work demonstrates the construction of aligned TiO 2 nanorod arrays (NRAs), vertically grown on substrates, for SILAR processed PbS QDSCs with high FF. The microscopic, structural, and optical characterizations reveal a rutile phase of single-crystalline structure in nature for TiO 2 NRAs. The as-designed solar cell affords the advantages of panchromatic absorption for adequate light harvesting, reasonable band structure for efficient electron injection, and one dimensional (1D) oriented architecture for radial directional charge transport. A solar cell based on a 1.9 μm TiO 2 NRA photoelectrode yields a considerable power conversion efficiency of 1.15% under 1 sun, coupled with a significantly enhanced FF of 0.51 in contrast to a conventional TiO 2 nanoparticle-based device (FF = 0.38). The high FF is attributed to the outstanding electron transport behavior from QD sensitizers to conducting substrates via a shortest pathway (i.e., through radial direction of NRAs), thereby suppressing charge recombinations in solar devices. Therefore, the architecture of aligned 1D TiO 2 NRAs is of great prospect to construct high performance PbS QDSCs. The performance improvement is promisingly expected through fully understanding of the radial directional charge transport mechanism and further optimization of NRA photoelectrodes and QD assemblies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Quantum Dots Synthesis And Properties · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Photovoltaic materials: present efficiencies and future challenges10.1126/science.aad4424 ↗
2. Colloidal quantum dot solar cells10.1021/acs.chemrev.5b00063 ↗
3. O. Ergen, S.M. Gilbert, T. Pham, S.J. Turner, M.T.Z. Tan, M.A. Worsley, A. Zettl, Graded bandgap perovskite solar cells, Nat. Mater. http://dx.doi.org/10.1038/NMAT4795.10.1038/nmat4795 ↗
4. Quantum dot sensitized solar cell: recent advances and future perspectives in photoanode10.1016/j.solmat.2016.05.062 ↗
5. Tailoring band structure of ternary CdSxSe1−x quantum dots for highly efficient sensitized solar cells10.1016/j.solmat.2016.04.049 ↗
6. Multiple exciton collection in a sensitized photovoltaic system10.1126/science.1191462 ↗
7. Lead telluride quantum dot solar cells displaying external quantum efficiencies exceeding 120%10.1021/acs.nanolett.5b03161 ↗
8. Mesoporous TiO2 beads for high efficiency CdS/CdSe quantum dot co-sensitized solar cells10.1039/c3ta13460a ↗
9. Influence of cationic precursors on CdS quantum-dot-sensitized solar cell prepared by successive ionic layer adsorption and reaction10.1021/jp410615b ↗
10. Mn-doped quantum dot sensitized solar cells: a strategy to boost efficiency over 5%10.1021/ja211224s ↗
11. Enhanced performance of CdTe quantum dot sensitized solar cell via anion exchanges10.1016/j.jpowsour.2014.12.022 ↗
12. 10.6% Certified colloidal quantum dot solar cells via solvent-polarity-engineered halide passivation10.1021/acs.nanolett.6b01957 ↗
13. PbSe quantum dot solar cells with more than 6% efficiency fabricated in ambient atmosphere10.1021/nl503085v ↗
14. Efficient charge-carrier extraction from Ag2S quantum dots prepared by the SILAR method for utilization of multiple exciton generation10.1039/C4NR04463K ↗
15. High-efficiency “green” quantum dot solar cells10.1021/ja504310w ↗
16. Zn−Cu−In−Se quantum dot solar cells with a certified power conversion efficiency of 11.6%10.1021/jacs.6b00615 ↗
17. A novel anion-exchange strategy for constructing high performance PbS quantum dot-sensitized solar cells10.1016/j.nanoen.2016.10.052 ↗
18. Quantum-dot-sensitized solar cell with unprecedentedly high photocurrent10.1038/srep01050 ↗
19. Enhanced performance of PbS-sensitized solar cells via controlled successive ionic-layer adsorption and reaction10.1039/C5CP00941C ↗
20. Surface engineering of PbS quantum dot sensitized solar cells with a conversion efficiency exceeding 7%10.1039/C6TA02465C ↗
21. Band-structure tailoring and surface passivation for highly efficient near-infrared responsive PbS quantum dot photovoltaics10.1016/j.jpowsour.2016.09.160 ↗
22. Influence of deposition strategies on CdSe quantum dot-sensitized solar cells: a comparison between successive ionic layer adsorption and reaction and chemical bath deposition10.1039/C5TA01461A ↗
23. Design, fabrication and modification of metal oxide semiconductor for improving conversion efficiency of excitonic solar cells10.1016/j.ccr.2016.02.016 ↗
24. Exploring the effect of manganese in lead sulfide quantum dot sensitized solar cell to enhance the photovoltaic performance10.1039/C4RA16999A ↗
25. High performance PbS quantum dot sensitized solar cells exceeding 4% efficiency: the role of metal precursors in the electron injection and charge separation10.1039/c3cp51651b ↗
26. Graded bandgap structure for PbS/CdS/ZnS quantum-dot-sensitized solar cells with a PbxCd1–xS interlayer10.1063/1.4804149 ↗
27. Panchromatic sensitized solar cells based on metal sulfide quantum dots grown directly on nanostructured TiO2 electrodes10.1021/jz2000112 ↗
28. Comparison of solid-state quantum-dot-sensitized solar cells with ex situ and in situ grown PbS quantum dots10.1021/jp5051904 ↗
29. PbS colloidal quantum-dot-sensitized inorganic–organic hybrid solar cells with radial-directional charge transport10.1002/cphc.201300825 ↗
30. Oriented rutile TiO2 nanorod arrays for efficient quantum dot-sensitized solar cells with extremely high open-circuit voltage10.1016/j.ceramint.2016.04.159 ↗
31. High efficiency solid-State sensitized solar cell-based on sub-micrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer10.1021/nl400286w ↗
32. Photoelectrochemical properties of PbS quantum dot sensitized TiO2 nanorods photoelectrodes10.1039/C6RA02543A ↗
33. Enhanced photoelectric performance of PbS/CdS quantum dot co-sensitized solar cells via hydrogenated TiO2 nanorod arrays10.1039/C4CC02217C ↗
34. Hierarchical rutile TiO2 flower cluster-based high efficiency dye-sensitized solar cells via direct hydrothermal growth on conducting substrates10.1002/smll.201201590 ↗
35. Growth of oriented single-crystalline rutile TiO2 nanorods on transparent conducting substrates for dye-sensitized solar cells10.1021/ja8078972 ↗
36. Shi · Nano Energy · 2016 · 22 · 2710.1016/j.nanoen.2016.02.009 ↗
37. Electron injection from colloidal PbS quantum dots into titanium dioxide nanoparticles10.1021/nn800336b ↗
38. All-solid-state hybrid solar cells based on a new organometal halide perovskite sensitizer and one-dimensional TiO2 nanowire arrays10.1039/c3nr00218g ↗
39. Significantly enhanced open circuit voltage and fill factor of quantum dot sensitized solar cells by linker seeding chemical bath deposition10.1021/jp3094319 ↗