journal article·2024-11

Preparation, structural, electrical, and ferroelectric properties of solid and lead zirconium titanate ink

Mohamed Mustafa Dabour, Mahmoud Ahmed Mousa, Khaled Faisal Qasim

Publisher page

Abstract

The novelty of the work lies in the design and development of a significantly low-cost lead zirconate titanate (PZT) ink similar in its electrical properties to its original solid materials, which can be used for 3-D printing to print electronic circuits, shape memory, and devices quickly. The Zr/Ti=52/48 ratio was achieved during the solid-state reaction to create the PZT powder. XRD, FT-IR, and SEM characterized the synthesized material. The PZT powder was found to form in a tetragonal phase. The PZT powder was used to prepare PZT ink with a 13 % Wt/Wt solid content composition. The ink`s rheological characteristics and physical properties, such as particle size distribution, surface tension, viscosity, and electrical properties, were studied. Dielectric properties like dielectric constant (ε /) and dielectric loss (ε") indicate the poly-dispersive nature of the material. The temperature-dependent dielectric constant (ε /) curve indicates relaxor behavior with a maximum at high temperatures. The poly-dispersive nature of the material was analyzed using Cole-Cole plots. The frequency dependence of AC conductivity follows the universal power law. The temperature dependence of dc-conductivity follows the Arrhenius law, with an activation energy of 0.14 eV at lower temperatures and 0.85 eV at higher temperatures. The electrical conductance study showed that PZT ceramic can be used in electronic circuits because of its high resistivity value and small temperature coefficient of resistance. The piezoelectric measurement displays d33 as 129 pC/N at room temperature .
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. A review on sustainable inks for printed electronics: materials for conductive, dielectric and piezoelectric sustainable inks
2. Environmentally friendly printable piezoelectric inks and their application in the development of all-printed touch screens10.1021/acsaelm.9b00363 ↗
3. Inorganic nanomaterials for printed electronics: a review10.1039/C7NR01604B ↗
4. A review on printed electronics: fabrication methods, inks, substrates, applications and environmental impacts
5. Electrical and electrochemical studies of core–shell structured nanorods of LiMn2O4@PANI composite10.1007/s10854-020-04482-5 ↗
6. Technologies for printing sensors and electronics over large flexible substrates: a review10.1109/JSEN.2014.2375203 ↗
7. Proceedings Piezoelectric lead zirconate titanate as an energy material: a review study10.1016/j.matpr.2020.11.692 ↗
8. “Investigation on Temperature-Dependent Electrical Transport Behavior of Cobalt Ferrite (CoFe2O4) for Thermistor Applications,”10.1149/2162-8777/acd47a ↗
9. Materials development and potential applications of transparent ceramics: A review
10. Study of Ferroelectric and Piezoelectric Properties on Ca Doped PZT Ceramics10.1016/j.matpr.2017.06.037 ↗
11. Ferroelectrics: The role of ceramic science and engineering,”10.1016/j.jeurceramsoc.2007.12.014 ↗
12. Fabrication and characterization of microcantilever integrated with PZT thin film sensor and actuator10.1016/j.tsf.2007.03.138 ↗
13. Ferroelectric ceramics: history and technology10.1111/j.1151-2916.1999.tb01840.x ↗
14. Ferroelectric domain structures and their morphology evolution in Pb(Ni1/3Nb2/3)O3–PbZrO3–PbTiO3 piezoelectric ceramics modified by bismuth and zinc substitutions10.1111/j.1551-2916.2007.02003.x ↗
15. Enhanced energy storage and fast discharge properties of BaTiO3 based ceramics modified by i(Mg1/2Zr1/2)O310.1016/j.jeurceramsoc.2018.11.025 ↗
16. Dielectric properties and energy-storage performances by screen printing technique10.1016/j.jallcom.2013.10.107 ↗
17. Ultra-high energy storage performance with mitigated polarization saturation in lead-free10.1039/C9TA01165J ↗
18. Silver niobate lead-free antiferroelectric ceramics: enhancing energy storage density by B ‑ site doping10.1021/acsami.7b17382 ↗
19. Lead-free antiferroelectric silver niobate tantalate with high energy storage performance10.1002/adma.201701824 ↗
20. “Ultrahigh Energy-Storage Density in NaNbO3 -Based Lead-Free Relaxor Antiferroelectric Ceramics with Nanoscale Domains
21. Large energy-storage density in transition-metal oxide modified NaNbO3–Bi(Mg0.5Ti0.5)O3 lead-free ceramics through regulating the antiferroelectric phase structure10.1039/D0TA02285C ↗
22. Structural, Electrical and Ferroelectric Characteristics of Bi(Fe0.9La 0.1)O310.1016/j.ceramint.2018.08.185 ↗
23. An environmentally-benign NaNbO3 based perovskite antiferroelectric alternative to traditional lead-based counterparts10.1039/C9TC05672F ↗
24. “Processing of Pb(Zr0.52Ti0.48)O3 (PZT) ceramics from microwave and conventional hydrothermal powders,”10.1016/S0025-5408(99)00143-9 ↗
25. Microwave-hydrothermal synthesis and characterization of barium titanate powders10.1016/S0025-5408(01)00729-2 ↗
26. Pb (Zr0.95Ti0.05)O3 powders synthesized by Pechini method: Effect of molecular weight of polyester on the phase and morphology10.1007/s10971-006-1509-3 ↗
27. Effect of urea on lead zirconate titanate—Pb(Zr0.52Ti0.48)O3—nanopowders synthesized by the Pechini method10.1016/j.jeurceramsoc.2004.02.021 ↗
28. Synthesis and characterization of lead zirconate titanate (PZT) obtained by two chemical methods10.1016/j.ceramint.2013.07.068 ↗
29. X-ray diffraction procedures for polycrystalline and amorphous materials10.1021/ja01612a110 ↗
30. Polyaniline impact on graphitic C3N4’ s structural and physicochemical properties for high stability energy storage systems: Practical and theoretical studies
31. Study structural, dielectric and ferroelectric properties of Pb (Zr1-x Tix)O3 ceramics near the morphotropic phase boundary10.25130/tjps.v21i3.1005 ↗
32. Characterization and X-ray peak broadening analysis in PZT nanoparticles prepared by modified sol-gel method10.1016/j.ceramint.2010.03.022 ↗
33. Effect of oxidizer on PANI for producing BaTiO3@PANI perovskite composites and their electrical and electrochemical properties10.1007/s10904-022-02335-8 ↗
34. Electrical properties of Li2BiV5O15 ceramics10.1016/j.physb.2007.02.065 ↗
35. Structural, electrical and magneto-electric characteristics of complex multiferroic perovskite Bi0.5Pb0.5Fe0.5Ce0.5O310.1007/s10854-016-5241-7 ↗
36. A new ferroelectric oxide Li2Pb2Pr2W2Ti4Nb4O30: Synthesis and characterization10.1016/j.jpcs.2012.01.013 ↗
37. J.C. Anderson, “Dielectrics,” Champan Hall Ltd, 1964.
38. Electrical and ferroelectric characteristics of (LaLi)1/2(Fe2/3Mo1/3)O310.1007/s10854-016-4894-6 ↗
39. Effect of Cr 2 O 3 and Fe 2 O 3 doping on the thermal activation of un-polarized PZT charge carriers10.1016/j.bsecv.2017.11.001 ↗
40. Microstructure and physical properties of the multicomponent PZT-type ceramics doped by calcium, sodium, bismuth and cadmium10.1007/s00339-018-2203-3 ↗
41. Dielectric and electrical properties of gadolinium-modified lead-zirconate-titanate system10.1016/j.jallcom.2014.03.078 ↗
42. Complex impedance studies on tungsten-bronze electroceramic: Pb2Bi3LaTi5O1810.1007/s10853-005-2620-5 ↗
43. Retraction Note: Effect of La-substitution on structural, dielectric and electrical properties of (Bi0.5Pb0.5) (Fe0.5Zr0.25Ti0.25)O310.1007/s00339-023-06384-9 ↗
44. Electrical and Electrochemical Behavior of Binary Li4Ti5O12–Polyaniline Composite10.1007/s10904-020-01478-w ↗
45. Impedance spectroscopy study of NaBa2V5O15 ceramic10.1016/j.jallcom.2006.07.028 ↗
46. Study of complex impedance spectroscopic properties of LiBa2Nb5O15 ceramics10.1016/j.matchemphys.2007.05.036 ↗
47. Structural, morphological and electrical properties of Sn-substituted Ni-Zn ferrites synthesized by double sintering technique10.1016/j.jmmm.2016.10.027 ↗
48. Studies of structural, thermal and electrical behavior of polymer nanocomposite electrolytes10.3144/expresspolymlett.2008.76 ↗
49. Effect of PVA blending on structural and ion transport properties of CS:AgNt-based polymer electrolyte membrane10.3390/polym9110622 ↗
50. Double doping effect on the structural and dielectric properties of PZT ceramics10.1088/0022-3727/37/22/019 ↗
51. Structural, characterization and electrical properties of a novel defect pychlore10.1006/jssc.1995.1216 ↗
52. Structural, electrical and magnetic properties of eco-friendly complex multiferroic material: Bi(Co0.35Ti0.35Fe0.30)O310.1016/j.ceramint.2018.09.249 ↗
53. Note on the parameterization of the constant-phase admittance element10.1016/0167-2738(84)90049-3 ↗
54. Nd substitution response on structural, dielectric, and electrical features of bismuth iron titanate10.1016/j.ceramint.2023.10.259 ↗
55. Structural and electrical properties of nanocrystalline PLZT ceramics synthesized via mechanochemical,” J. Appl. D Appl. Phys.
56. Structural, electrical and ferroelectric characteristics of Bi(Fe0.9La 0.1)O310.1016/j.ceramint.2018.08.185 ↗
57. Structural, dielectric, electrical and magnetic characteristics of lead-free multiferroic: Bi(Cd0.5Ti0.5)O3–BiFeO3 solid solution,”10.1016/j.jallcom.2018.03.114 ↗
58. Determination of equivalent circuit model components of piezoelectric materials by using impedance spectroscopy10.1080/10584587.2014.874274 ↗
59. AC electrical conductivity and dielectric properties of doping induced molecular ferroelectric diisopropylammonium bromide AC electrical conductivity and dielectric properties of doping induced molecular ferroelectric diisopropylammonium bromide10.1088/2053-1591/ab2c79 ↗
60. Electrical and dielectric properties of self-assembled polyaniline on barium sulphate surface10.1016/j.ejpe.2021.09.001 ↗
61. Physicochemical Properties of Oriented Crystalline Assembled Polyaniline/Metal Doped Li4Ti5O12 Composites for Li-ion Storage10.1007/s10904-023-02720-x ↗
62. “Structural, Dielectric and Pyroelectric Properties of Praseodymium Based Complex Tungsten Bronze Ferroelectrics10.1080/00150193.2012.738588 ↗
63. Equivalent circuit model of a PbZr0.6Ti0.4O3 ceramic using impedance spectroscopy
64. A 10 years-developmental study on conducting polymers composites for supercapacitors electrodes: A review for extensive data interpretation10.1016/j.jiec.2023.03.008 ↗
65. Structural refinement, investigation of dielectric and magnetic properties of NBT doped BaFe12O19 novel composite system10.1016/j.jallcom.2020.154214 ↗
66. Impedance and Raman spectroscopic studies of (Na0.5Bi0.5)TiO310.1088/0022-3727/44/35/355402 ↗
67. Study of structural, dielectric, electrical, and magnetic properties of samarium-doped double perovskite material for thermistor applications
68. Preparation and properties of gamma-PVDF/lead zirconium titanate composites
69. Complex impedance spectroscopy studies of PLZT (5/52/48) ceramics synthesized by sol–gel route10.1007/s10854-013-1442-5 ↗
70. Phase transition and electrical properties of strontium orthovanadate10.1016/j.jallcom.2013.06.050 ↗
71. Structural, electrical and thermistor behavior of BiFeO3–PbZrO3 for energy-storage devices