journal article·2023-10

Core-shell ferroelectric nanowire arrays for photovoltaic applications

Jizhuang He, Jiahua Li, Yunfei He, Yin Ren, Sisi Li, Shulin Xing, Rongli Gao, Wei Cai, Chunlin Fu

Publisher page

Abstract

Bismuth ferrite (BFO), as an inorganic perovskite metal oxide without Pb, is a potential photovoltaic material for solar cells. However, the low optical absorption and carrier transport ability of BFO limits the improvement of its photoelectric conversion efficiency. In this work, a transmission layer/ferroelectric layer/transmission layer shell-core nanowire array is constructed to verify its application in photovoltaics. With its large specific surface area, this structure can enhance light absorption. In particular, TiO 2 nanowire arrays are used as an electron transport layer, BFO as a light absorption layer, and WO 3 as a hole transport layer. With an increase in external bias, the device`s photovoltaic performance first increases before decreasing. TiO 2/BFO/WO 3 device produced an open-circuit voltage ( V oc) and short-circuit current density ( J sc) of 1.32 V and 1.14 mA/cm 2 , respectively, when the scanning bias is 1.75 V. The photoelectric conversion efficiency (PCE) reached 0.93 %, which is significantly higher than that of previous reports on BFO-based photovoltaic devices. As a result of this work, core-shell nanowire arrays have potential applications in the photovoltaics field.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Multiferroics and related materials · Ferroelectric and Piezoelectric Materials · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. In-plane ferroelectricity in few-layered GeS and its van der Waals ferroelectric diodes10.1039/D1NR03807A ↗
2. Recent progress of bulk photovoltaic effect in acentric single crystals and optoelectronic devices10.1016/j.matt.2022.06.011 ↗
3. High-performance self-powered ultraviolet photodetector based on coupled ferroelectric depolarization field and heterojunction built-in potential10.1002/aelm.202100717 ↗
4. Impact of ferroelectric domain structure on bulk photovoltaic effect of epitaxial BiFe1−xCoxO3 films10.1002/aelm.202101043 ↗
5. Anomalous photovoltaic effect with high fill factor in Fe3+-Li+ co-doped ZnO films10.1016/j.nanoen.2022.107685 ↗
6. Scavenging energy sources using ferroelectric materials10.1002/adfm.202100905 ↗
7. Large ferroelectric-polarization-modulated photovoltaic effects in bismuth layered multiferroic/semiconductor heterostructure devices10.1039/D0TC05638C ↗
8. Single nanowire solar cells beyond the Shockley-Queisser limit10.1038/nphoton.2013.32 ↗
9. A novel high performance photodetection based on axial NiO/β-Ga2O3 p-n junction heterostructure nanowires array10.1088/1361-6528/ac5b54 ↗
10. Dual-regulation charges separation tactics with synergistic effect of 1D/0D heterostructure and inserted ferroelectric layer for boosting photoelectrochemical water oxidation10.1039/D0TA11933D ↗
11. Switchable ferroelectric photovoltaic in the low bandgap cobalt-substituted BiFeO3 epitaxial thin films10.1016/j.apsusc.2022.154898 ↗
12. Effect of Ca doping on photovoltaic effect of BiFeO310.1007/s00339-021-04651-1 ↗
13. Photoresponse of high quality epitaxial BiFeO3 films grown through hydrothermal method and rapid microwave assisted method10.1016/j.ceramint.2021.11.325 ↗
14. Above-band-gap voltage from oriented bismuth ferrite ceramic photovoltaic cells10.1021/acsaem.1c02395 ↗
15. Progress in BiFeO3-based heterostructures: materials, properties and applications10.1039/C9NR08800H ↗
16. Enhanced photovoltaic performances of La-doped bismuth ferrite/zinc oxide heterojunction by coupling piezo-phototronic effect and ferroelectricity10.1021/acsnano.0c05398 ↗
17. Plasmonic gold nanorods mediated p-BFCrO/n-rGO heterojunction in realizing efficient ferroelectric photovoltaic devices10.1016/j.mssp.2020.104937 ↗
18. Effect of laser fluence on multiferroic BiFeO3 ferroelectric photovoltaic cells10.1016/j.jpcs.2020.109602 ↗
19. Enhanced ferroelectric photovoltaic effect in semiconducting single-wall carbon nanotube/BiFeO3 heterostructures enabled by wide-range light absorption and efficient charge separation10.1039/D0TA00116C ↗
20. A transparent photovoltaic device of NiO/MgO quantum dots/TiO2 arrays pn junction with carrier injection of MgO QDs10.1007/s10854-021-07333-z ↗
21. A review on the properties and applications of WO3 nanostructure-based optical and electronic devices10.3390/nano11082136 ↗
22. Synergistically enhanced charge separation in BiFeO3/Sn:TiO2 nanorod photoanode via bulk and surface dual modifications10.1016/j.nanoen.2019.02.025 ↗
23. Bandgap tuning of Sm and Co Co-doped BFO nanoparticles for photovoltaic application10.1007/s11664-018-6597-7 ↗
24. Photoelectrochemical degradation of organic pollutants on a La3+ doped BiFeO3 perovskite10.3390/catal11091069 ↗
25. Comparison of ferroelectric photovoltaic performance in BFO/BTO multilayer thin film structure fabricated using CSD & PLD techniques10.1007/s11664-021-08793-z ↗
26. Enhancement in photovoltaic properties of bismuth ferrite/zinc oxide heterostructure solar cell device with graphene/indium tin oxide hybrid electrodes10.1016/j.ceramint.2019.12.166 ↗
27. Large‐area, flexible broadband photodetector based on ZnS–MoS2 hybrid on paper substrate10.1002/adfm.201701611 ↗
28. Understanding the efficacy of electron and hole transport layers in realizing efficient chromium doped BiFeO3 ferroelectric photovoltaic devices10.1016/j.solener.2020.07.032 ↗
29. P–i–n heterojunctions with BiFeO3 perovskite nanoparticles and p-and n-type oxides: photovoltaic properties10.1021/am506066m ↗
30. Enhanced photovoltaic response of lead-free ferroelectric solar cells based on (K,Bi)(Nb,Yb)O3 films10.1039/C9CP06291B ↗
31. Effect of top electrodes on photovoltaic properties of polycrystalline BiFeO3 based thin film capacitors
32. Enhanced photovoltaic effect in Ca and Mn co-doped BiFeO3 epitaxial thin films10.1016/j.apsusc.2020.147194 ↗
33. Switchable ferroelectric diode and photovoltaic effect in BiFeO310.1126/science.1168636 ↗
34. Bulk photovoltaic effect at visible wavelength in epitaxial ferroelectric BiFeO3 thin films10.1002/adma.200902985 ↗
35. Design of oxygen vacancy in BiFeO3-based films for higher photovoltaic performance10.1016/j.apsusc.2021.151713 ↗
36. Ferroelectric BiFeO3 as an oxide dye in highly tunable mesoporous all‐oxide photovoltaic heterojunctions10.1002/smll.201602355 ↗
37. Enhancement of photovoltage of dye-sensitized solid-state solar cells by introducing high-band-gap oxide layers10.1016/j.solmat.2004.11.009 ↗
38. A highly efficient transition metal oxide layer for hole extraction and transport in inverted polymer bulk heterojunction solar cells10.1039/c3ta10863e ↗
39. Photovoltaic effect in an indium-tin-oxide/ZnO/BiFeO3/Pt heterostructure10.1063/1.4899146 ↗
40. Modelling and comparative performance analysis of tin based mixed halide perovskite solar cells with IGZO and CuO as charge transport layers10.1002/er.6909 ↗
41. Improving the photovoltaic effect by resistive switching10.1063/1.5039590 ↗