journal article·2023-01

Highly efficient SWCNT/GaAs van der Waals heterojunction solar cells enhanced by Nafion doping

Yue Chen, Xianglei Shi, Dayong Zhou, Hao Wei, Guiting Yang, Luoxi Zhang, Mingkui Zhu, Huan Yin, Lijie Sun, Yanjie Su

Publisher page

Abstract

The atomic-level interface and strong interfacial interaction enable van der Waals (vdW) heterostructures to fabricate innovative photovoltaic devices by combing single-walled carbon nanotubes (SWCNTs) with bulk semiconductors, in which the device performance can be enhanced significantly using outstanding photoelectric property of SWCNTs. Herein, we reported a facile method to fabricate SWCNT/GaAs vdW heterojunction solar cell by transferring p-type (6,5)-enriched SWCNT film onto the n-type GaAs substrate, a power conversion efficiency (PCE) of 7.23 % has been achieved without any other treatment. Furthermore, the PCE value can be enhanced to 11.24 % by introducing Nafion as a highly effective dopant with a short-circuit current density of 24.70 mA/cm 2 , an open-circuit voltage of 0.64 V and a fill factor of 0.71. Our results reveal that the introduction of Nafion not only induces a stronger and closer contact at the interface between SWCNTs and GaAs, but also shows strong p-doping effect due to the existence of sulfonic acid functional groups. This p-doping effect of Nafion increases the work function of SWCNTs and subsequently enlarges the barrier height at the heterojunction for more efficient carrier separation. In addition, Nafion can also serve as an antireflection and passivation layer, reducing the incident light loss and the carrier recombination rate. These findings suggest that Nafion could be used to improve the performance of SWCNT-based vdW heterojunction devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Graphene research and applications · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Van Der Waals heterostructures by design: from 1D and 2D to 3D10.1016/j.matt.2020.12.015 ↗
2. Recent progress in the assembly of nanodevices and Van Der Waals heterostructures by deterministic placement of 2D materials10.1039/C7CS00556C ↗
3. Sub-bandgap voltage electroluminescence and magneto-oscillations in a WSe2 light-emitting van der Waals heterostructure10.1021/acs.nanolett.6b04374 ↗
4. An ultrahigh-performance photodetector based on a perovskite-transition-metal-dichalcogenide hybrid structure10.1002/adma.201600992 ↗
5. Van Der Waals BP/InSe heterojunction for tunneling field-effect transistors10.1007/s10853-021-05784-7 ↗
6. Strain-modulated photoelectric responses from a flexible alpha-In2Se3/3R MoS2 heterojunction10.1007/s40820-020-00584-1 ↗
7. Large and uniform single crystals of MoS2 monolayers for ppb-level NO2 sensing10.1021/acsanm.2c01701 ↗
8. Highly sensitive broadband single-walled carbon nanotube photodetectors enhanced by separated graphene nanosheets10.1002/adom.201800791 ↗
9. Carbon-nanotube photonics and optoelectronics10.1038/nphoton.2008.94 ↗
10. Carbon nanotubes in TiO2 nanofiber photoelectrodes for high-performance perovskite solar cells10.1002/advs.201600504 ↗
11. Single‐walled carbon nanotubes in emerging solar cells: synthesis and electrode applications10.1002/aenm.201801312 ↗
12. Carbon nanotube/silicon heterojunctions for photovoltaic applications10.1016/j.nanoms.2019.03.001 ↗
13. Performance enhancement of organic/Si solar cell using CNT embedded hole selective layer10.1016/j.solener.2020.09.024 ↗
14. Solution processable PEDOT:PSS/multiwalled carbon nanotube composite films for flexible electrode applications10.1002/pssa.201701003 ↗
15. Temperature-triggered chemical switching growth of in-plane and vertically stacked graphene-boron nitride heterostructures10.1038/ncomms7835 ↗
16. High-efficiency large-area carbon nanotube-silicon solar cells10.1002/aenm.201600095 ↗
17. Novel approach to enhance efficiency of hybrid silicon-based solar cells via synergistic effects of polymer and carbon nanotube composite film10.1016/j.nanoen.2017.02.003 ↗
18. Facile preparation of lightweight and flexible PVA/PEDOT:PSS/MWCNT ternary composite for high-performance EMI shielding in the X-band through absorption mechanism10.1007/s11664-019-07676-8 ↗
19. Single-walled carbon nanotubes in solar cells10.1007/s41061-017-0181-0 ↗
20. Scalable and solid-state redox functionalization of transparent single-walled carbon nanotube films for highly efficient and stable solar cells10.1002/aenm.201700449 ↗
21. High-efficiency and stable silicon heterojunction solar cells with lightly fluorinated single-wall carbon nanotube films10.1016/j.nanoen.2019.104442 ↗
22. Multifunctional effect of P‐doping, antireflection, and encapsulation by polymeric acid for high efficiency and stable carbon nanotube‐based silicon solar cells10.1002/aenm.201902389 ↗
23. Breakthrough carbon nanotube-silicon heterojunction solar cells10.1002/aenm.201903261 ↗
24. Dispersing and doping carbon nanotubes by poly(P-styrene-sulfonic acid) for high-performance and stable transparent conductive films10.1016/j.carbon.2020.03.063 ↗
25. High efficiency CNT-Si heterojunction solar cells by dry gas doping10.1016/j.carbon.2019.02.078 ↗
26. High-efficiency CNT-Si solar cells based on a collaborative system enabled by oxide penetration10.1007/s12274-021-3749-5 ↗
27. Harnessing light energy with a planar transparent hybrid of graphene/single wall carbon nanotube/n-type silicon heterojunction solar cell10.1016/j.electacta.2015.08.082 ↗
28. Impact of SWCNT processing on nanotube-silicon heterojunctions10.1039/C5NR08703A ↗
29. Carbon nanotube/silicon heterojunction solar cell with an active area of 4 cm2 realized using a multifunctional molybdenum oxide layer10.1016/j.carbon.2021.08.056 ↗
30. Direct and dry deposited single-walled carbon nanotube films doped with Moo(x) as electron-blocking transparent electrodes for flexible organic solar cells10.1021/jacs.5b03739 ↗
31. Efficient eouble junction InGaP/GaAs solar cell using a thin carbon nano tube layer10.1016/j.ijleo.2016.04.039 ↗
32. Heterogeneous carbon nano-tube window layer with higher sheet resistance improve the solar cell performance10.1088/1757-899X/211/1/012023 ↗
33. Electrical and optical transport of GaAs/carbon nanotube heterojunctions10.1021/nl0802178 ↗
34. Current distribution in GaAs solar cell with carbon nanotube transport layer
35. A numerical study on the influence of interface recombination on performance of carbon nanotube/GaAs solar cells10.1007/s11082-016-0656-1 ↗
36. Interface effects in SWCNT/GaAs heterojunction solar cell: a simulation study10.1016/j.ijleo.2015.02.058 ↗
37. Polymeric acid-doped transparent carbon nanotube electrodes for organic solar cells with the longest doping durability10.1039/C8TA03383H ↗
38. Front and back‐junction carbon nanotube‐silicon solar cells with an industrial architecture10.1002/adfm.202000484 ↗
39. Self-powered broadband photodetector based on single-walled carbon nanotube/GaAs heterojunctions10.1021/acssuschemeng.0c04495 ↗
40. From ultrasoft pseudopotentials to the project arguemented-wave method10.1103/PhysRevB.59.1758 ↗
41. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
42. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
43. Enhancing the grain size of organic halide perovskites by sulfonate-carbon nanotube incorporation in high performance perovskite solar cells10.1039/C6CC00268D ↗
44. High-performance solution-based silicon heterojunction solar cells using carbon nanotube with polymeric acid doping10.1016/j.carbon.2020.12.056 ↗
45. 18.5% efficient graphene/GaAs Van Der Waals heterostructure solar cell10.1016/j.nanoen.2015.07.003 ↗
46. Effects of a molecular monolayer modification of NiO nanocrystal layer surfaces on perovskite crystallization and interface contact toward faster hole extraction and higher photovoltaic performance10.1002/adfm.201505215 ↗
47. Functionalized CNTs as effective additives to improve the efficiency of perovskite solar cells10.1021/acsaem.0c01675 ↗
48. Guanidinium thiocyanate selective ostwald ripening induced large grain for high performance perovskite solar cells10.1016/j.nanoen.2017.10.006 ↗
49. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
50. Extremely stable graphene electrodes doped with macromolecular acid10.1038/s41467-018-04385-4 ↗