journal article·2022-12

Low temperature preparation of W-doped In2O3 transparent electrodes for p-i-n structured perovskite solar cells

Chao Song, Lubing Jiang, Jianhua Shi, Weijie Du, Liping Zhang, Yiwen Zhang, Zhengxin Liu

Publisher page

Abstract

W-doped In 2O 3 (IWO) films prepared by reactive plasma deposition (RPD) technique at 150 °C have been studied to replace Sn-doped In 2O 3 (ITO) serving as transparent electrodes for p-i-n structured perovskite solar cells. The optical and electrical properties of IWO films were found to depend on the oxygen partial pressure of deposition process. Compared with the reference ITO films, the IWO films obtained at an oxygen partial pressure of 0.12 Pa exhibited prominent performance, including higher near-infrared transmittance and carrier mobility. Furthermore, the IWO films showed higher work function than that of the ITO films, resulting in the enhancement of open-circuit voltage (0.982 V vs 0.901 V) and conversion efficiency (12.9 % vs 11.9 %). It can be attributed to that high work function of the IWO films reduced the carrier transport barrier at the interface between transparent electrode and PEDOT:PSS and enhanced the carrier collection near the edge of the perovskite bandgap. The excellent properties of the RPD-prepared IWO films indicate that it is a promising transparent electrode material for p-i-n structured perovskite solar cells, especially for applications requiring low-temperature fabrication.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Towards stable and commercially available perovskite solar cells10.1038/nenergy.2016.152 ↗
3. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
4. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
5. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
6. Ultra-high open-circuit voltage of tin perovskite solar cells via an electron transporting layer design10.1038/s41467-020-15078-2 ↗
7. CH3NH3Cl-assisted one-step solution growth of CH3NH3PbI3: structure, charge-carrier dynamics, and photovoltaic properties of perovskite solar cells10.1021/jp502696w ↗
8. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
9. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2 % power conversion efficiency10.1038/s41563-018-0115-4 ↗
10. Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers10.1039/C6EE02100J ↗
11. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
12. Polymeric surface modification of niox-based inverted planar perovskite solar cells with enhanced performance10.1021/acssuschemeng.8b04078 ↗
13. Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers10.1039/C6EE02100J ↗
14. Halide perovskite solar cells for building integrated photovoltaics: transforming building façades into power generators10.1002/adma.202104661 ↗
15. Flexible and efficient ITO-free semitransparent perovskite solar cells10.1016/j.solmat.2016.07.010 ↗
16. Solution process of selective color-gamut perovskite solar cell modulated with organic fabry-perot electrode for building-integrated photovoltaic10.1016/j.solmat.2021.111192 ↗
17. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
18. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
19. The effect of transparent conductive oxide on the performance CH3NH3PbI3 perovskite solar cell without electron/hole selective layers10.1016/j.solener.2016.06.044 ↗
20. Defect passivation by alcohol-soluble small molecules for efficient p–i–n planar perovskite solar cells with high open-circuit voltage10.1039/C9TA06718C ↗
21. High open-circuit voltage of 1.134 v for inverted planar perovskite solar cells with sodium citrate-doped PEDOT:PSS as a hole transport layer10.1021/acsami.9b06526 ↗
22. Liquid metal acetate assisted preparation of high-efficiency and stable inverted perovskite solar cells10.1039/C9TA04192C ↗
23. Cerium oxide and hydrogen co-doped indium oxide films for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2016.01.005 ↗
24. Electron scattering mechanisms in indium–tin-oxide thin films prepared at the various process conditions10.1016/j.apsusc.2005.03.203 ↗
25. Effects of heat treatment on properties of ITO films prepared by rf magnetron sputtering10.1016/j.vacuum.2004.01.081 ↗
26. Electrical properties of vacuum-annealed titanium-doped indium oxide films10.1016/j.apsusc.2011.06.035 ↗
27. Highly conductive and broadband transparent Zr-doped In2O3 as front electrode for solar cells10.1109/JPHOTOV.2018.2851306 ↗
28. High mobility and visible–near infrared transparent titanium doped indium oxide thin films produced by spray pyrolysis10.1016/j.tsf.2012.10.013 ↗
29. High-mobility, sputtered films of indium oxide doped with molybdenum10.1063/1.1687984 ↗
30. Improved near-infrared transparency in sputtered In2O3-based transparent conductive oxide thin films by Zr-doping10.1063/1.2711768 ↗
31. High mobility W-doped In2O3 thin films: effect of growth temperature and oxygen pressure on structural, electrical and optical properties10.1016/j.apsusc.2007.07.146 ↗
32. Solution processed W-doped In2O3 thin films with high carrier mobility10.1016/j.ceramint.2019.09.201 ↗
33. Flexible W-doped In2O3 films grown on ion beam treated polyethylene terephthalate substrate using roll to roll sputtering10.1016/j.mssp.2018.09.015 ↗
34. Flexible and transparent IWO films prepared by plasma arc ion plating for flexible perovskite solar cells10.1063/1.5054347 ↗
35. Dependence of oxygen flow rate on piezoelectric photothermal spectra of ZnO thin films grown by a reactive plasma deposition10.1016/j.mseb.2004.12.014 ↗
36. Improvement of ZnO TCO film growth for photovoltaic devices by reactive plasma deposition (RPD)10.1016/j.tsf.2004.11.072 ↗
37. Effects of carrier concentration on the dielectric function of ZnO:Ga and In2O3:Sn studied by spectroscopic ellipsometry: analysis of free-carrier and band-edge absorption10.1103/PhysRevB.71.075109 ↗
38. Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: a comparison10.1016/S0379-6779(99)00354-9 ↗
39. Work function study of rhenium oxidation using an ultra high vacuum scanning kelvin probe10.1063/1.1289486 ↗
40. Changes in the structural and electrical properties of vacuum post-annealed tungsten- and titanium-doped indium oxide films deposited by radio frequency magnetron sputtering10.1016/j.tsf.2011.08.060 ↗
41. Tungsten-doped In2O3 transparent conductive films with high transmittance in near-infrared region10.1016/j.jcrysgro.2008.05.012 ↗
42. Performance of electron beam deposited tungsten doped indium oxide films as anodes in organic solar cells10.1016/j.solmat.2011.03.020 ↗
43. Transparent conductive oxide thin films of tungsten-doped indium oxide10.1016/j.tsf.2006.07.014 ↗
44. Dependence of electrical and optical properties on thickness of tungsten-doped indium oxide thin films10.1016/j.tsf.2008.07.023 ↗
45. Phase stabilization and phonon properties of single crystalline rhombohedral indium oxide10.1021/cg700910n ↗
46. Atomistic processes in the early stages of thin-film growth10.1126/science.276.5311.377 ↗
47. On the initial growth of indium tin oxide on glass10.1063/1.116274 ↗
48. Structural, electrical and optical properties of highly crystalline indium tin oxide films fabricated by RPD at room temperature10.1016/j.matlet.2016.06.084 ↗
49. Effects of substrate treatment on the initial growth mode of indium-tin-oxide films10.1063/1.1835003 ↗
50. High-performance of PEDOT/PSS free organic solar cells on an air-plasma-treated ITO substrate10.1021/am4049964 ↗
51. Energy level engineering of PEDOT:PSS by antimonene quantum sheet doping for highly efficient OLEDs10.1039/C9TC06049A ↗