journal article·2024-03

In situ synthesis of polyoxometalate-derived MoS2/phosphomolybdic acid composites for highly sensitive NO2 detection

Liwei Zhang, Tianqi Wang, Ying Yang, Meijie Wei, Feng Li, Hui Yu, Xiangting Dong

Publisher page

Abstract

MoS 2 is a promising gas sensing material due to its low resistance and low operating temperature. But the sensitivity of MoS 2 is limited by fast electron-hole complexation. In this work, phosphomolybdic acid (PMo 12 ) was used as precursor. After sulfurizing by one-step hydrothermal method, the generated MoS 2 and unspent PMo 12 can in-situ form MoS 2/PMo 12 composite nanospheres. The gas sensing performances of the composite were comprehensively investigated. By adjusting hydrothermal reaction temperature, optimized sensitivity (MoS 2/PMo 12-240) to NO 2 gas can be gained. At a low operating temperature of 80 °C, the optimized response value to 100 ppm NO 2 gas is 2.466, which is higher than most reported MoS 2-based NO 2 sensors. Moreover, MoS 2/PMo 12-240 composite also exhibits good selectivity, repeatability, long-term stability and humidity resistance. The mechanism of sensing performance enhancement was also analyzed and discussed. As a semiconductor-like material, PMo 12 can form heterojunction together with MoS 2 . The valence band of PMo 12 can capture the holes in MoS 2 and effectively suppresses electron-hole complexation. Thus the sensing performance can be improved. This work provides a new strategy for designing and constructing high performance sulfide composite gas sensors by introducing POMs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Conversion of MoS2 to ternary alloyed MoS2-xSex for resistive NO2 sensors
2. The influence of different ZnO nanostructures on NO2 sensing performance10.1016/j.snb.2020.129145 ↗
3. Fast detection of NO2 by porous SnO2 nanotoast sensor at low temperature10.1016/j.jhazmat.2021.126414 ↗
4. Hydrothermally engineered WO3 nanoflowers: a selective detection towards toxic NO2 gas10.1016/j.snb.2022.132584 ↗
5. Design of hetero-nanostructures on MoS2 nanosheets to boost NO2 room-temperature sensing.10.1021/acsami.8b05811 ↗
6. Large and Uniform Single Crystals of MoS2 Monolayers for ppb-Level NO2 Sensing10.1021/acsanm.2c01701 ↗
7. Highly active 2D layered MoS2-rGO hybrids for energy conversion and storage applications10.1038/s41598-017-08677-5 ↗
8. Highly effective shielding of electromagnetic waves in MoS2 nanosheets synthesized by a hydrothermal method.10.1016/j.jpcs.2019.05.041 ↗
9. Electronic sensitization enhanced p-type ammonia gas sensing of zinc doped MoS2/RGO composites10.1016/j.aca.2023.340932 ↗
10. Light-assisted room temperature gas sensing performance and mechanism of direct Z-scheme MoS2/SnO2 crystal faceted heterojunctions10.1016/j.jhazmat.2022.129246 ↗
11. In-situ synthesis of covalently-bonded SnS2/FeS2 heterostructures for high rate sodium storage10.1016/j.cej.2023.141827 ↗
12. Ultrathin ZIF-8 film containing polyoxometalate as an enhancer for selective formaldehyde sensing10.1039/C8TC00987B ↗
13. Application of poyoxometalates in chemiresistive gas sensors: a review10.1021/acssensors.2c02341 ↗
14. First one-dimensional Cu2ZnSnS4-based gas sensor and enhanced performance at room temperature by polyoxometalate electron acceptor10.1016/j.snb.2023.133405 ↗
15. Polyoxometalate as pivotal interface in SnO2@PW12@TiO2 coaxial nanofibers: From heterojunction design to photocatalytic and gas sensing applications10.1016/j.snb.2023.133928 ↗
16. Polyoxometalate as electron acceptor in dye/TiO2 films to accelerate room-temperature NO2 gas sensing10.1016/j.snb.2022.132795 ↗
17. Polyoxometalate electron acceptor incorporated improved properties of Cu2ZnSnS4-based room temperature NO2 gas sensor10.1016/j.snb.2021.130683 ↗
18. Composition-and phase-controlled synthesis and applications of alloyed phase heterostructures of transition metal disulphides10.1039/C7NR01015J ↗
19. Tetragonal Nanosized Zirconia: Hydrothermal Synthesis and Its Performance as a Promising Ceramic Reinforcement10.3390/inorganics11050217 ↗
20. Study of the mechanisms of the t-ZrO2→ c-ZrO2 type polymorphic transformations in ceramics as a result of irradiation with heavy Xe22+ ions10.1016/j.solidstatesciences.2021.106791 ↗
21. Highly Sensitive NO2 Gas Sensors Based on MoS2@ MoO3 Magnetic Heterostructure10.3390/nano12081303 ↗
22. Highly sensitive and low detection limit of resistive NO2 gas sensor based on a MoS2/graphene two-dimensional heterostructures10.1016/j.apsusc.2019.06.230 ↗
23. Hierarchical 3D flower-like MoS2 spheres: post-thermal treatment in vacuum and their NO2 sensing properties10.1016/j.matlet.2016.07.086 ↗
24. Hierarchical hollow MoS2 microspheres as materials for conductometric NO2 gas sensors10.1016/j.snb.2018.11.069 ↗
25. Nanocomposites of Quasicrystal Nanosheets and MoS2 Nanoflakes for NO2 Gas Sensors10.1021/acsanm.3c00346 ↗
26. Synthesis and photoelectrochemical catalytic properties of polyoxometalate supported on zeolitic imidazolate Framework, ZIF-9–PMo1210.1016/j.mseb.2023.116385 ↗
27. Sandwich-type cobalt-polyoxometalate as an effective hole extraction layer for enhancing BiVO4-based photoelectrochemical oxidation10.1016/j.jallcom.2019.05.063 ↗
28. Effect of humidity on light-activated NO and NO2 gas sensing by hybrid materials10.3390/nano10050915 ↗