Polymer solar cells with NiO hole-collecting interlayers processed by atomic layer deposition

Abstract We report on the photovoltaic properties of polymer solar cells that use NiO-coated indium tin oxide (ITO) as the hole-collecting electrode. The NiO films were prepared by atomic layer deposition (ALD) on top of ITO with thicknesses varying from 6 to 25 nm. The NiO films increase the work function (WF) of the ITO, allowing NiO-coated ITO to act as an efficient hole-collecting electrode. Devices made with pristine NiO showed poor current–voltage characteristics. However, subsequent O2-plasma treatment further increased the WF of NiO, tuning NiO-coated ITO into an efficient hole-collecting electrode for polymer solar cells based on the donor poly(3-hexylthiophene-2,5-diyl) (P3HT). The polymer solar cells with the O2-plasma treated NiO-coated ITO hole-collecting electrodes yield a power conversion efficiency of 4.1 ± 0.2% under simulated air mass 1.5 G 100 mW/cm2 illumination, which is comparable to reference devices with poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)-coated ITO hole-collecting electrodes.