Reducing the MAPbI3 microstrain by fast crystallization
Source abstract
Abstract
Control over perovskite crystal growth, resulting in thin film morphology, has been at the very foundation of the evolution of perovskite photovoltaics (PVs). Methylammonium lead triiodide (MAPbI 3 ) perovskite has been the workhorse material for this class of semiconductors, offering good efficiency with a relatively simple composition, which attracts industrial scale production. Despite that, instability has hampered their further exploitation. In this work, we explored the effect of different types and timing of the antisolvents on MAPbI 3 perovskite crystallization. This approach enabled control of the crystalline microstrain while reducing unwanted trap density. This effect impacted device performances, enabling the achievement of MAPbI 3 solar cell with power conversion efficiency (PCE) approaching 22%. Importantly, we demonstrated that an efficient MAPbI 3 perovskite solar cell is also a stable one . Our solar cells showed an efficiency loss of only 10% after 900 h at 85°C, putting MA-based PSCs back among promising PV technologies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · 2D Materials and Applications · Luminescence and Fluorescent Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
2. Compositional Gradient of Mixed Halide 2D Perovskite Interface Boosts Outdoor Stability of Highly Efficient Perovskite Solar Cells
3. On the synergistic interplay between annealing temperature and time and additive concentration for efficient and stable FAPbI3 perovskite solar cells
4. Showcasing the research on thermal decomposition of CH 3 NH 3 PbI 3 perovskite by Dr Thermal degradation of CH 3 NH 3 PbI 3 perovskite into NH 3 and CH 3 I gases observed by coupled thermogravimetry-mass spectrometry analysis †10.1039/C6EE02016J ↗
5. Smart Materials to Empowering Perovskite Solar Cells with Self-Healing Capability10.1002/sstr.202300448 ↗
6. Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
7. The Electronic Structure of MAPI-Based Perovskite Solar Cells: Detailed Band Diagram Determination by Photoemission Spectroscopy Comparing Classical and Inverted Device Stacks10.1002/aenm.202002129 ↗
8. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
9. Perovskite Solar Cells Very Important Paper Methylamine-Gas-Induced Defect-HealingBehavior of CH 3 NH 3 PbI 3 Thin Films for Perovskite Solar Cells10.1002/ange.201504379 ↗
10. Reduced Defects of MAPbI 3 Thin Films Treated by FAI for High-Performance Planar Perovskite Solar Cells10.1002/adfm.201805810 ↗
11. Regulating strain in perovskite thin films through charge-transport layers10.1038/s41467-020-15338-1 ↗
12. Fabrication Strategy for Efficient 2D/3D Perovskite Solar Cells Enabled by Diffusion Passivation and Strain Compensation10.1002/aenm.202002004 ↗
13. Excellent Intrinsic Long-Term Thermal Stability of Co-Evaporated MAPbI 3 Solar Cells at 85 °C
14. Anti-Solvent Crystallization Strategies for Highly Efficient Perovskite Solar Cells10.3390/cryst7100291 ↗
15. Understanding the effect of chlorobenzene and isopropanol anti-solvent treatments on the recombination and interfacial charge accumulation in efficient planar perovskite solar cells10.1039/C8TA03782E ↗
16. Antisolvent with an Ultrawide Processing Window for the One-Step Fabrication of Efficient and Large-Area Perovskite Solar Cells10.1002/adma.201802763 ↗
17. How reliable are efficiency measurements of perovskite solar cells? The first inter-comparison, between two accredited and eight non-accredited laboratories10.1039/C7TA05609E ↗
18. Coordination Chemistry as a Universal Strategy for a Controlled Perovskite Crystallization10.1002/adma.202302889 ↗
19. Stability follows efficiency based on the analysis of a large perovskite solar cells ageing dataset10.1038/s41467-023-40585-3 ↗
20. Efficient solar cells are more stable: the impact of polymer molecular weight on performance of organic photovoltaics10.1039/C6TA00721J ↗
21. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
22. Molecular cation and low-dimensional perovskite surface passivation in perovskite solar cells10.1038/s41560-024-01529-3 ↗
23. 23.7% Efficient inverted perovskite solar cells by dual interfacial modification10.1126/sciadv.abj7930 ↗
24. Revealing the charge carrier kinetics in perovskite solar cells affected by mesoscopic structures and defect states from simple transient photovoltage measurements10.1038/s41598-020-74603-x ↗
25. Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21%10.1021/jacs.8b10520 ↗
26. Quantifying Charge Extraction and Recombination Using the Rise and Decay of the Transient Photovoltage of Perovskite Solar Cells10.1002/adma.202300872 ↗
27. Photocurrent transient measurements in MAPbI3 thin films
28. Consistent Device Simulation Model Describing Perovskite Solar Cells in Steady-State, Transient, and Frequency Domain10.1021/acsami.9b04991 ↗
29. Transient Photocurrent Response in a Perovskite Single Crystal-Based Photodetector: A Case Study on the Role of Electrode Spacing and Bias10.1002/aelm.202300226 ↗
30. Two-dimensional additive diethylammonium iodide promoting crystal growth for efficient and stable perovskite solar cells10.1039/C9RA01186B ↗
31. Sustainable and Circular Management of Perovskite Solar Cells via Green Recycling of Electron Transport Layer-Coated Transparent Conductive Oxide10.1002/adfm.202306040 ↗
32. Identification and characterization of the intermediate phase in hybrid organic–inorganic MAPbI3 perovskite10.1039/C5DT04420K ↗
33. Growth and properties of lead iodide thin films by spin coating10.1007/s12034-016-1282-z ↗
34. Enhanced Crystallinity in Organic–Inorganic Lead Halide Perovskites on Mesoporous TiO 2 via Disorder–Order Phase Transition10.1021/cm501541p ↗
35. Unit-cell refinement from powder diffraction scans10.1107/S0021889881009618 ↗
36. Interaction between cation orientation, octahedra tilting and hydrogen bonding in methylammonium lead triiodide10.1002/crat.201600177 ↗
37. Probing the Microstructure of Methylammonium Lead Iodide Perovskite Solar Cells10.1002/ente.201800989 ↗
38. Highly efficient (200) oriented MAPbI3 perovskite solar cells10.1016/j.cej.2021.133845 ↗
39. A step beyond in steady-state and time-resolved electro-optical spectroscopy: Demonstration of a customized simple, compact, low-cost, fiber-based interferometer system10.1063/4.0000134 ↗
40. Shining Light on the Photoluminescence Properties of Metal Halide Perovskites10.1002/adfm.201910004 ↗
41. Recombination Kinetics in Organic-Inorganic Perovskites: Excitons, Free Charge, and Subgap States10.1103/PhysRevApplied.2.034007 ↗
42. Charge-Carrier Dynamics in Organic-Inorganic Metal Halide Perovskites10.1146/annurev-physchem-040215-112222 ↗
43. Ion Migration in Organometal Trihalide Perovskite and Its Impact on Photovoltaic Efficiency and Stability10.1021/acs.accounts.5b00420 ↗
44. The two faces of capacitance: New interpretations for electrical impedance measurements of perovskite solar cells and their relation to hysteresis10.1063/1.5063259 ↗
45. Influence of Charge Transport Layers on Capacitance Measured in Halide Perovskite Solar Cells10.1016/j.joule.2020.01.012 ↗
46. Efficient MAPbI3-based perovskite solar cells exceeding 21% efficiency via aging treatment10.1016/j.cej.2023.146451 ↗
47. Engineering Stress in Perovskite Solar Cells to Improve Stability
48. Gwyddion: An open-source software for SPM data analysis10.2478/s11534-011-0096-2 ↗