journal article·2023-02Open access

Interfacial α-FAPbI3 phase stabilization by reducing oxygen vacancies in SnO2−x

Jung Hwan Lee, SunJe Lee, Taehee Kim, Hyungju Ahn, Gyu Yong Jang, Kwang Hee Kim, Yoon Jun Cho, Kan Zhang, Ji-Sang Park, Jong Hyeok Park

Joule· Volume 7· Issue 2

Abstract

Reducing nonradiative recombination in SnO2−x has been a critical point for fabricating efficient and stable perovskite solar cells (PSCs). Controlling oxygen vacancies in SnO2−x is an efficient strategy, but most research only presents the consequential results without scrutinizing the phenomenological part of the strategy. Here, we deeply examined and revealed a new beneficial effect of controlling oxygen vacancies in SnO2−x. Oxygen atoms of SnO2−x were responsible for retaining α-FAPbI3 at the FAPbI3/SnO2−x interface by controlling the formation of iodine interstitials, which are strong initiators of unfavorable perovskite phase transitions. Using crystallographic analysis, we observed suppression of these phase transitions when oxygen vacancies were mitigated in SnO2−x by oxidized black phosphorus quantum dots. Furthermore, formamidinium (FA) cation retention was also observed as a beneficial effect of the strategy by introducing hydrogen bonding sources for FA cations at the interface. Our findings suggest the genuine necessity of oxygen vacancy reduction in SnO2−x. Reducing nonradiative recombination in SnO2−x has been a critical point for fabricating efficient and stable perovskite solar cells (PSCs). Controlling oxygen vacancies in SnO2−x is an efficient strategy, but most research only presents the consequential results without scrutinizing the phenomenological part of the strategy. Here, we deeply examined and revealed a new beneficial effect of controlling oxygen vacancies in SnO2−x. Oxygen atoms of SnO2−x were responsible for retaining α-FAPbI3 at the FAPbI3/SnO2−x interface by controlling the formation of iodine interstitials, which are strong initiators of unfavorable perovskite phase transitions. Using crystallographic analysis, we observed suppression of these phase transitions when oxygen vacancies were mitigated in SnO2−x by oxidized black phosphorus quantum dots. Furthermore, formamidinium (FA) cation retention was also observed as a beneficial effect of the strategy by introducing hydrogen bonding sources for FA cations at the interface. Our findings suggest the genuine necessity of oxygen vacancy reduction in SnO2−x.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic and Molecular Conductors Research · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Stability of solution-processed MAPbI3 and FAPbI3 layers10.1039/C6CP00721J ↗
2. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
3. Cubic perovskite structure of black formamidinium lead iodide, α-[HC(NH2)2]PbI3, at 298 K10.1021/acs.jpclett.5b01432 ↗
4. Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells10.1126/science.abc4417 ↗
5. Methylammonium chloride induces intermediate phase stabilization for efficient perovskite solar cells10.1016/j.joule.2019.06.014 ↗
6. Entropic stab. mixed cation ABX3 metal halide perovskites for high performance perovskite solar cells10.1039/C5EE03255E ↗
7. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air10.1038/s41560-018-0192-2 ↗
8. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
9. Pathways toward 30% efficient single-junction perovskite solar cells and the role of mobile ions10.1002/solr.202100219 ↗
10. Reducing surface halide deficiency for efficient and stable iodide-based perovskite solar cells10.1021/jacs.9b13418 ↗
11. Buried interfaces in halide perovskite photovoltaics10.1002/adma.202006435 ↗
12. TiO2 surface oxygen vacancy passivation towards mitigated interfacial lattice distortion and efficient perovskite solar cell10.1016/j.apsusc.2020.148583 ↗
13. Perovskite films with reduced interfacial strains via a molecular-level flexible interlayer for photovoltaic application10.1002/adma.202001479 ↗
14. Efficient electron extraction of SnO2 electron transport layer for lead halide perovskite solar cell10.1038/s41524-020-00370-y ↗
15. Enhanced band-filling effect in halide perovskites via hydrophobic conductive linkers. Cell reps
16. A two-photon tandem black phosphorus quantum dot-sensitized BiVO4 photoanode for solar water splitting10.1039/D1EE03014K ↗
17. Edge stabilization in reduced-dimensional perovskites10.1038/s41467-019-13944-2 ↗
18. Phosphate-passivated SnO2 electron transport layer for high-performance perovskite solar cells10.1021/acsami.9b11817 ↗
19. Modification of SnO2 with phosphorus-containing Lewis acid for high-performance planar perovskite solar cells with negligible hysteresis10.1002/solr.202100942 ↗
20. Novel molecular doping mechanism for n-doping of SnO2 via triphenylphosphine oxide and its effect on perovskite solar cells10.1002/adma.201805944 ↗
21. Black phosphorus nanoparticles as a novel fluorescent sensing platform for nucleic acid detection10.1039/C6QM00341A ↗
22. Differentiation of tin oxides using electron energy-loss spectroscopy10.1103/PhysRevB.69.233304 ↗
23. Interpreting time-resolved photoluminescence of perovskite materials10.1039/D0CP04950F ↗
24. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
25. Band alignment engineering between planar SnO2 and halide perovskites via two-step annealing10.1021/acs.jpclett.9b02488 ↗
26. Stabilization of formamidinium lead triiodide α-phase with isopropylammonium chloride for perovskite solar cells10.1038/s41560-021-00802-z ↗
27. Shallow iodine defects accelerate the degradation of α-phase formamidinium perovskite10.1016/j.joule.2020.08.016 ↗
28. On the origin of hysteresis in perovskite solar cells10.1002/adfm.201602231 ↗
29. Influence of charge transport layer on open-circuit voltage and hysteresis in perovskite solar cells10.1016/j.joule.2018.02.013 ↗