Flexible Cu2AgBiI6-based perovskite-inspired solar cells using large-scale processing methods
Source abstract
Abstract
Abstract In this work, emerging perovskite-inspired Cu 2 AgBiI 6 (CABI) solar cells were successfully fabricated on flexible substrates, demonstrating that the transition from rigid to flexible materials does not compromise device performance. This underscores the versatility of CABI on two different kinds of substrates. Additionally, to optimize charge extraction, we selected a polymeric hole-transport material (HTM), PPDT2FBT, whose energy levels align with CABI. The PPDT2FBT-based devices outperformed those using the well-known poly(3-hexylthiophene) (P3HT), leading to power conversion efficiencies as high as approximately 0.8%. These results suggest that PPDT2FBT may hold promise as a HTM for use in low-toxicity, perovskite-inspired photovoltaic systems, such as those based on CABI. Furthermore, roll-to-roll processing techniques, crucial for scalable production, were tested. However, controlling the morphology of the active layer remains a significant challenge. These findings represent critical steps toward the large-scale manufacturing and commercialization of flexible, PIM-based solar cells.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Bati, A. S. R. et al. Next-generation applications for integrated perovskite solar cells. Commun. Mater. 4, 2 (2023).10.1038/s43246-022-00325-4 ↗
2. Yang, C. et al. Achievements, challenges, and future prospects for industrialization of perovskite solar cells. Light Sci. Appl. 13, 227 (2024).10.1038/s41377-024-01461-x ↗
3. Kumar, S. et al. A review on perovskite solar cells (PSCs), materials and applications. J. Materiomics 7, 940–956 (2021).10.1016/j.jmat.2021.04.002 ↗
4. Peng, Y. et al. Lead-free perovskite-inspired absorbers for indoor photovoltaics. Adv. Energy Mater. 11, 2002761 (2021).10.1002/aenm.202002761 ↗
5. Huang, Y. T. et al. Perovskite-inspired materials for photovoltaics and beyond-from design to devices. Nanotechnology 32, 132004 (2021).10.1088/1361-6528/abcf6d ↗
6. Chakraborty, A. et al. Rudorffites and beyond: perovskite-inspired silver/copper pnictohalides for next-generation environmentally friendly photovoltaics and optoelectronics. Adv. Funct. Mater. 32, 2203300 (2022).10.1002/adfm.202203300 ↗
7. Xu, J. et al. Air-stable lead-free antimony-based perovskite inspired solar cells and modules. ACS Energy Lett. 9, 671–678 (2024).10.1021/acsenergylett.3c02409 ↗
8. Sansom, H. C. et al. Highly absorbing lead-free semiconductor Cu2AgBiI6 for photovoltaic applications from the quaternary CuI−AgI−BiI3 phase. J. Am. Chem. Soc. 143, 3983–3992 (2021).10.1021/jacs.1c00495 ↗
9. Grandhi, G. K. et al. Enhancing the microstructure of perovskite-inspired Cu-Ag-Bi-I absorber for efficient indoor photovoltaics. Small 18, 2203768 (2022).10.1002/smll.202203768 ↗
10. Mahmoudi, T. et al. Suppression of Sn2+/Sn4+ oxidation in tin-based perovskite solar cells with graphene-tin quantum dots composites in active layer. Nano Energy 90, 106495 (2021).10.1016/j.nanoen.2021.106495 ↗
11. Fujihara, T. et al. Fabrication of high coverage MASnI3 perovskite films for stable, planar heterojunction solar cells. J. Mater. Chem. C 5, 1121–1127 (2017).10.1039/C6TC05069G ↗
12. Saha, P. et al. Performance optimization of MASnI3 perovskite solar cells: insights into device architecture. Micro Nanostruct. 191, 207827 (2024).10.1016/j.micrna.2024.207827 ↗
13. Grandhi, G. K. et al. Perovskite-inspired Cu2AgBiI6 for mesoscopic indoor photovoltaics under realistic low-light intensity conditions. Sustain. Energy Fuels 7, 66–73 (2023).10.1039/D2SE00995A ↗
14. Vidal, R. et al. Assessing the environmental impact of pnictogen-based perovskite-inspired materials for indoor photovoltaics. Adv. Energy Mater. 2403981 https://doi.org/10.1002/aenm.202403981 (2024).10.1002/aenm.202403981 ↗
15. Pai, N. et al. Solution processable direct bandgap copper-silver- bismuth iodide photovoltaics: compositional control of dimensionality and optoelectronic properties. Adv. Energy Mater. 12, 2201482 (2022).10.1002/aenm.202201482 ↗
16. Al-Anesi, B. et al. Antimony-bismuth alloying: the key to a major boost in the efficiency of lead-free perovskite-inspired photovoltaics. Small 19, 2303575 (2023).10.1002/smll.202303575 ↗
17. Wang, M. et al. Lead-free perovskite materials for solar cells. Nano-Micro Lett. 13, 62 (2021).10.1007/s40820-020-00578-z ↗
18. Parvazian, E. et al. Selecting non-halogenated low-toxic hole transporting materials for Roll-to-Roll perovskite solar cells using carbon electrodes. Commun. Mater. 5, 82 (2024).10.1038/s43246-024-00516-1 ↗
19. Xu, D. et al. Constructing molecular bridge for high-efficiency and stable perovskite solar cells based on P3HT. Nat. Commun. 13, 7020 (2022).10.1038/s41467-022-34768-7 ↗
20. Wang, Y. et al. PTAA as efficient hole transport materials in perovskite solar cells: a review. Sol. RRL 6, 2200234 (2022).10.1002/solr.202200234 ↗
21. Hu, L. et al. High efficiency perovskite solar cells with PTAA hole transport layer enabled by PMMA:F4-TCNQ buried interface layer. J. Mater. Chem. C 10, 9714–9722 (2022).10.1039/D2TC01494G ↗
22. Hu, X. et al. Molecular weight effect of poly-TPD hole-transporting layer on the performance of inverted perovskite solar cells. Sol. Energy 218, 368–374 (2021).10.1016/j.solener.2021.02.064 ↗
23. Ganesan, P., Nazeeruddin, M. K. & Ganesan, P. Perovskite solar cells: challenges facing polymeric hole selective materials in p–i–n configuration. Adv. Energy Mater. 12, 2409939 (2024).
24. Al-Anesi, B. et al. Dissecting the role of the hole-transport layer in Cu2AgBiI6 solar cells: an integrated experimental and theoretical study. J. Phys. Chem. C. 128, 9446–9453 (2024).10.1021/acs.jpcc.4c01871 ↗
25. Lee, T. H. et al. Investigation of charge carrier behavior in high performance ternary blend polymer solar cells. Adv. Energy Mater. 6, 1600637 (2016).10.1002/aenm.201600637 ↗
26. Nguyen, L. et al. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device. Energy Environ. Sci. 7, 3040–3051 (2014).10.1039/C4EE01529K ↗
27. Koh, C. W. et al. Enhanced efficiency and long-term stability of perovskite solar cells by synergistic effect of nonhygroscopic doping in conjugated polymer-based hole-transporting layer. ACS Appl. Mater. Interfaces 9, 43846–43854 (2017).10.1021/acsami.7b12973 ↗
28. Sepalage, G. A. et al. Can laminated carbon challenge gold? Toward universal, scalable, and low-cost carbon electrodes for perovskite solar cells. Adv. Mater. Technol. 7, 2101148 (2021).10.1002/admt.202101148 ↗
29. Predeep, P. et al. Measurement of hole mobility in P3HT based photovoltaic cell using space charge limited current method. AIP Conf. Proc. 2162, 020142 (2019).10.1063/1.5130352 ↗
30. Zhang, F. et al. Low-temperature solution-processed Cu2AgBiI6 films for high performance photovoltaics and photodetectors. ACS Appl. Mater. Interfaces 14, 18498–18505 (2022).10.1021/acsami.2c01481 ↗
31. Putland, B. W. J. et al. Compositional transformation and impurity-mediated optical transitions in co-evaporated Cu2AgBiI6 thin films for photovoltaic applications. Adv. Energy Mater. 14, 2303313 (2024).10.1002/aenm.202303313 ↗
32. De Rossi, F. et al. Modified P3HT materials as hole transport layers for flexible perovskite solar cells. J. Power Sources 494, 229735 (2021).10.1016/j.jpowsour.2021.229735 ↗
33. Gao, Y. et al. Flexible perovskite solar cells: from materials and device architectures to applications. ACS Energy Lett. 7, 1412–1445 (2022).10.1021/acsenergylett.1c02768 ↗
34. Green, M. A. Commercial progress and challenges for photovoltaics. Nat. Energy 1, 15015 (2016).10.1038/nenergy.2015.15 ↗
35. Kim, Y. Y. et al. Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window. Nat. Commun. 11, 5146 (2020).10.1038/s41467-020-18940-5 ↗
36. Bisconti, F. et al. Polymer-assisted single-step slot-die coating of flexible perovskite solar cells at mild temperature from dimethyl sulfoxide. ChemPlusChem 86, 1442–1450 (2021).10.1002/cplu.202100251 ↗
37. Saki, Z. et al. Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells. Energy Environ. Sci. 14, 5690–5722 (2021).10.1039/D1EE02018H ↗
38. Phillips, R. et al. Influence of temperature and point defects on the X-ray diffraction pattern of graphite. Carbon Trends 5, 100124 (2021).10.1016/j.cartre.2021.100124 ↗
39. Grandhi, G. K. Wide-bandgap perovskite-inspired materials: defect-driven challenges for high-performance optoelectronics. Adv. Funct. Mater. 34, 2307441 (2024).10.1002/adfm.202307441 ↗
40. Buizza, L. R. V. et al. Charge-carrier mobility and localization in semiconducting Cu2AgBiI6 for photovoltaic applications. ACS Energy Lett. 6, 1729–1739 (2021).10.1021/acsenergylett.1c00458 ↗
41. Grandhi, G. K. et al. Role of self-trapped excitons in the broadband emission of lead-free perovskite-inspired Cu2AgBiI6. J. Phys. Chem. Lett. 14, 4192–4199 (2023).10.1021/acs.jpclett.3c00439 ↗
42. Zhanh, Q. et al. Hypophosphorous acid additive engineering for efficient Cu2AgBiI6 solar cells. Advanced Science News, no. 2504863, https://doi.org/10.1002/adfm.202504863 (2025).10.1002/adfm.202504863 ↗
43. Bisconti, F. et al. One-step polymer assisted roll-to-roll gravure-printed perovskite solar cells without using anti-solvent bathing. Cell Rep. Phys. Sci. 2, 100639 (2021).10.1016/j.xcrp.2021.100639 ↗
44. Mohammed, M. K. A. et al. Boosting the performance of CH3NH3PbI3 perovskite solar cells with a well-aligned polymeric hole-transporting layer. Indian. J. Phys. 99, 3009–3018 (2024).10.1007/s12648-024-03500-0 ↗