All inkjet-printed perovskite-based bolometers
Source abstract
Abstract
Abstract We show flexible bolometer devices produced entirely using digital inkjet printing on polymer substrates. The bolometers consist of a silver interdigital electrode thermistor covered with a methylammonium lead trihalide perovskite absorber layer which shows good absorber characteristics at visible wavelengths. Both the standalone thermistor and the complete bolometer devices show polymer PTC thermistor-like behavior over a temperature range of 17 to 36 °C, with a change in resistance up-to six orders of magnitude over this temperature range. The addition of the perovskite absorber to the thermistor structure provides the illumination-dependent behavior proper to bolometers.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Transition Metal Oxide Nanomaterials · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Trudeau, C. et al. Inkjet-printing of methylammonium lead trihalide perovskite as active layers for optoelectronic devices. MRS Adv. 3, 1–6 (2018).10.1557/adv.2018.172 ↗
2. Bernacka-Wojcik, I., Wojcik, P. J., Aguas, H., Fortunato, E. & Martins, R. Inkjet printed highly porous TiO2 films for improved electrical properties of photoanode. J. Colloid Interf. Sci. 465, 208–214 (2016).10.1016/j.jcis.2015.11.070 ↗
3. Mathies, F. et al. Multipass inkjet printed planar methylammonium lead iodide perovskite solar cells. J. Mater. Chem. A 4, 19207–19213 (2016).10.1039/C6TA07972E ↗
4. Hashmi, S. G. et al. Long term stability of air processed inkjet infiltrated carbon-based printed perovskite solar cells under intense ultra-violet light soaking. J. Mater. Chem. A 5, 4797–4802 (2017).10.1039/C6TA10605F ↗
5. Eggenhuisen, T. M. et al. High efficiency, fully inkjet printed organic solar cells with freedom of design. J. Mater. Chem. A 3, 7255–7262 (2015).10.1039/C5TA00540J ↗
6. Yang, W. S. et al. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science 356, 1376–1379 (2017).10.1126/science.aan2301 ↗
7. Leenen, M. A., Arning, V., Thiem, H., Steiger, J. & Anselmann, R. Printable electronics: flexibility for the future. Phys. Status Solidi 206, 588–597 (2009).10.1002/pssa.200824428 ↗
8. Vaz, A. et al. Full passive UHF tag with a temperature sensor suitable for human body temperature monitoring. IEEE Trans. Circuits Syst. II 57, 95–99 (2010).10.1109/TCSII.2010.2040314 ↗
9. Kokkoris, C. P. et al. Long-term ambulatory temperature monitoring in a subject with a hypernychthemeral sleep-wake cycle disturbance. Sleep 1, 177–190 (1978).10.1093/sleep/1.2.177 ↗
10. Lim, C. L., Byrne, C. & Lee, J. K. Human thermoregulation and measurement of body temperature in exercise and clinical settings. Ann. Acad. Med. Singap. 37, 347 (2008).10.47102/annals-acadmedsg.V37N4p347 ↗
11. Uribe, O. H., Martin, J. P. S., Garcia-Alegre, M. C., Santos, M. & Guinea, D. Smart building: decision-making architecture for thermal energy management. Sensors 15, 27543–27568 (2015).10.3390/s151127543 ↗
12. Moreno, M. V., Skarmeta, A. F., Venturi, A., Schmidt, M., & Schuelke, A., Context sensitive indoor temperature forecast for energy efficient operation of smart buildings. 2015 IEEE 2nd World Forum on Internet of Things (WF-IoT), 705–710 (IEEE, Milan, 2015).10.1109/WF-IoT.2015.7389140 ↗
13. Bessonov, A. A. & Kirikova, M. N. Flexible and printable sensors. Nanotechnol. Russ. 10, 165–180 (2015).10.1134/S1995078015020044 ↗
14. Yan, C., Wang, J. & Lee, P. S. Stretchable graphene thermistor with tunable thermal index. ACS Nano 9, 2130–2137 (2015).10.1021/nn507441c ↗
15. Li, Y., Samad, Y. A. & Liao, K. From cotton to wearable pressure sensor. J. Mater. Chem. A 3, 2181–2187 (2015).10.1039/C4TA05810K ↗
16. Wang, X. et al. Dynamic pressure mapping of personalized handwriting by a flexible sensor matrix based on the mechanoluminescence process. Adv. Mater. 27, 2324–2331 (2015).10.1002/adma.201405826 ↗
17. Van Hoof, C., De Moor, P. Handbook of Infrared Detection Technologies Ch. 12 (Elsevier Science Publisher, Amsterdam, 2002).
18. Morón, C., Payán, A., García, A. & Bosquet, F. Domotics project housing block. Sensors 16, 741 (2016).10.3390/s16050741 ↗
19. Fang, Y., Dong, Q., Shao, Y., Yuan, Y. & Huang, J. Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination. Nat. Photonics 9, 679–686 (2015).10.1038/nphoton.2015.156 ↗
20. Saidaminov, M. I. et al. Planar-integrated single-crystalline perovskite photodetectors. Nat. Commun. 6, 8724 (2015).10.1038/ncomms9724 ↗
21. Ka, I., Gerlein, L. F., Nechache, R. & Cloutier, S. G. High-performance nanotube-enhanced perovskite photodetectors. Sci. Rep. 7, 45543 (2017).10.1038/srep45543 ↗
22. Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N. & Seok, S. I. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells. Nano Lett. 13, 1764–1769 (2013).10.1021/nl400349b ↗
23. Zhao, X. G. et al. Cu–In halide perovskite solar absorbers. J. Am. Chem. Soc. 139, 6718–6725 (2017).10.1021/jacs.7b02120 ↗
24. Gao, P., Grätzel, M. & Nazeeruddin, M. K. Organohalide lead perovskites for photovoltaic applications. Energy Environ. Sci. 7, 2448–2463 (2014).10.1039/C4EE00942H ↗
25. Yin, W. J., Yang, J. H., Kang, J., Yan, Y. & Wei, S. H. Halide perovskite materials for solar cells: a theoretical review. J. Mater. Chem. A 3, 8926–8942 (2015).10.1039/C4TA05033A ↗
26. Soltman, D. & Subramanian, V. Inkjet-printed line morphologies and temperature control of the coffee ring effect. Langmuir 24, 2224–2231 (2008).10.1021/la7026847 ↗
27. Derby, B. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annu. Rev. Mater. Res. 40, 395–414 (2010).10.1146/annurev-matsci-070909-104502 ↗
28. Kwon, J. S., Lee, D. & Oh, J. Formation and characterization of inkjet-printed nanosilver lines on plasma-treated glass substrates. Appl. Sci. 8, 280 (2018).10.3390/app8020280 ↗
29. Hyseni, G., Caka, N. & Hyseni, K. Infrared thermal detectors parameters: semiconductor bolometers versus pyroelectrics. WSEAS Trans. Circuits Syst. 9, 238–247 (2010).
30. Dayeh, S. A., Butler, D. P., Celik-Butler, Z. & Wisian-Neilson, P. Uncooled micromachined bolometer arrays on flexible substrates. SPIE 5074, 537–547 (2003).
31. Li, H., Tang, Z., Liu, Z. & Zhi, C. Evaluating flexibility and wearability of flexible energy storage devices. Joule 3, 613–619 (2019).10.1016/j.joule.2019.01.013 ↗
32. Harris, K. D., Elias, A. L. & Chung, H. J. Flexible electronics under strain: a review of mechanical characterization and durability enhancement strategies. J. Mater. Sci. 51, 2771–2805 (2016).10.1007/s10853-015-9643-3 ↗
33. Li, F. & Liu, M. Recent efficient strategies for improving the moisture stability of perovskite solar cells. J. Mater. Chem. A 5, 15447–15459 (2017).10.1039/C7TA01325F ↗
34. Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N. & Snaith, H. J. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338, 643–647 (2012).10.1126/science.1228604 ↗
35. Zeng, Y. et al. Positive temperature coefficient thermistors based on carbon nanotube/polymer composites. Sci. Rep. 4, 6684 (2014).10.1038/srep06684 ↗
36. Struempler, R. G. Polymer composites for temperature and current sensors. SPIE 2779, 377–382 (1996).
37. Voshell, A., Dhar, N. & Rana, M. M. Materials for microbolometers: vanadium oxide or silicon derivatives. SPIE 10209, 102090M (2017).
38. Takshi, A., Bebeau, J. & Rahimi, F. Perovskite based photosensor for electrochemical studies. SPIE 9944, 99440R (2016).
39. Yang, Z., Dou, J. & Wang, M. Two Dimensional Materials for Photodetector (IntechOpen, London, 2018)
40. Niklaus, F. et al. Uncooled infrared bolometer arrays operating in a low to medium vacuum atmosphere: performance model and tradeoffs. SPIE 6542, 65421M (2007).
41. Eriksson, P., Andersson, J. Y. & Stemme, G. Thermal characterization of surface-micromachined silicon nitride membranes for thermal infrared detectors. J. Microelectromech. Syst. 6, 55–61 (1997).10.1109/84.557531 ↗
42. Aliane, A. et al. Mechanical modeling and characterization of suspended cooled silicon bolometers for sub-millimeter and millimeter waves polarization detection. Sens. Actuat. A 296, 254–264 (2019).10.1016/j.sna.2019.07.024 ↗
43. Agnese, P., Buzzi, C., Rey, P., Rodriguez, L. & Tissot, J. L. New technological development for far-infrared bolometer arrays. SPIE 3698, 284–290 (1999).
44. de Mulatier, S., Ramuz, M., Coulon, D., Blayac, S. & Delattre, R. Mechanical characterization of soft substrates for wearable and washable electronic systems. APL Mater. 7, 031505 (2019).10.1063/1.5063671 ↗
45. Park, M. H. et al. Flexible lamination encapsulation. Adv. Mater. 27, 4308–4314 (2015).10.1002/adma.201501856 ↗
46. Zardetto, V., Brown, T. M., Reale, A. & Di Carlo, A. Substrates for flexible electronics: a practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties. J. Polym. Sci. Pol. Phys. 49, 638–648 (2011).10.1002/polb.22227 ↗