Study on the magnetoelectric effect, ferroelectric and optical investigation of (1− x ) BCT + x NZLFO multiferroic composite

Abstract This study investigates the magnetoelectric coupling effect in dual‐phase multiferroic composites prepared using a solid‐state reaction method. The composites were fabricated with the formula (1− x )Ba₀.₇₇Ca₀.₂₃TiO₃(BCT) + x Ni₀.₆Zn₀.₂₅La₀.₁₅Fe₂O₄(NZLFO), where x varied from 0% to 100% in 10% increments. Ca‐doped BaTiO₃ served as the ferroelectric phase, while La‐doped Ni–Zn ferrite acted as the ferromagnetic phase. The effects of varying ferrite content ( x ) on structural, optical, ferroelectric, electrical, and magnetoelectric properties were comprehensively analyzed. X‐ray diffraction (XRD) with Rietveld refinement revealed a spinel cubic structure for the ferrite phases and a tetragonal structure for the perovskite phases. The study observed a moderate influence of ferrite concentration on the lattice parameters of BCT and an opposing effect on the lattice parameters of NZLFO. Optical measurements indicated higher light absorption in the visible range compared to the UV region and wide optical bandgap. Magnetic properties, characterized by saturation magnetization, exhibited a dependence on temperature, with a Curie temperature ( T c) of 700 K. Electrical resistivity displayed a maximum at x = 50% and remained constant at high frequencies. The study also confirmed the presence of electric polarization induced by a magnetic field, with the highest magnetoelectric coefficient observed at x = 10%. These findings demonstrate the successful fabrication of dual‐phase multiferroic composites with tunable properties through controlled ferrite content. The observed magnetoelectric coupling suggests potential applications in multifunctional devices.