Exploring the Physical Properties of Cu 2 WSe 4 for Optoelectronic and Thermoelectric Applications: A DFT Study
Source abstract
Abstract
Full-potential linearized augmented-plane wave method and Boltzmann transport theory are used to study the electrical, thermoelectric and optoelectronic response of the Cu 2 WSe 4 compound. The calculations are performed with the Perdew–Burke–Ernzerhof generalized gradient approximation (PBE-GGA) and modified Becke–Johnson (mBJ) potential. Structural optimization and formation energy calculations justify the stability of the studied compound. An indirect bandgap (N-Γ) of 1.36 eV with GGA and 1.52 eV with mBJ is achieved. The density of states also exposes the bandgap and confirms the semiconducting nature of Cu 2 WSe 4 . The optical properties such as dielectric function, refractive index, absorption coefficient and energy loss are also calculated. The thermoelectric response is calculated through the figure of merit (ZT), Seebeck coefficient, electrical and thermal conductivity and power factor. At high temperatures, a moderate ZT value of 0.65 is achieved with mBJ potential, which shows the possibility to use Cu 2 WSe 4 in the renewable energy device.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Van der Waals stacking-induced topological phase transition in layered ternary transition metal chalcogenides10.1021/acs.nanolett.6b04487 ↗
2. Highly active and stable layered ternary transition metal chalcogenide for hydrogen evolution reaction10.1016/j.nanoen.2016.08.065 ↗
3. Direct transition of a HfGeTe4 ternary transition-metal chalcogenide monolayer with a zigzag van der Waals gap10.1063/1.5023577 ↗
4. Ternary copper tungsten selenide nanosheets synthesized by a facile hot-injection method10.1016/j.jallcom.2016.12.401 ↗
5. Electronic structure of layered quaternary chalcogenide materials for band-gap engineering: the example of Cs2 M II M 3 IV Q 810.1103/PhysRevB.93.165205 ↗
6. Characterization of transparent superconductivity Fe-doped CuCrO2 delafossite oxide10.1016/j.apsusc.2016.01.120 ↗
7. Luminescence of delafossite-type CuAlO2 fibers with Eu substitution for Al cations10.1080/14686996.2016.1172024 ↗
8. Structural, magnetic and thermoelectric properties of delafossite-type oxide, CuCr1-xMgxO2 (0 ≤ x ≤ 0.05)10.1143/JJAP.46.1071 ↗
9. Structure and high temperature thermoelectric properties of delafossite-type oxide CuFe1-xNixO2 (0 ≤ x ≤ 0.05)10.1143/JJAP.46.5226 ↗
10. Anisotropic anomalies of thermoelectric transport properties and electronic structures in layered complex nitrides AMN2 (A = Na, Cu; M = Ta, Nb)10.1021/acs.chemmater.5b02015 ↗
11. Synthesis and characterization of oxygen-rich delafossite CuYO2 + x—application to H2-photo production10.1016/j.solmat.2007.03.014 ↗
12. Hydrogen photoproduction over new catalyst CuLaO210.1016/j.jphotochem.2006.09.017 ↗
13. Photovoltaic performance of Co-doped CuCrO2 for p-type dye-sensitized solar cells application10.1016/j.egypro.2017.03.1129 ↗
14. Design of nitride semiconductors for solar energy conversion.10.1039/C5TA09446A ↗
15. Copper borate as a photocathode in p-type dye-sensitized solar cells10.1039/C5RA24397A ↗
16. Gurinder · 2016 · 409 · 371
17. Gurinder · 2018 · 6 · 297
18. Selenide glass fibers for biochemical infrared sensing
19. Helical states of topological insulator Bi2Se310.1021/nl200584f ↗
20. A new type of thermoelectric material, Eu Zn2 Sb2.10.1063/1.3001608 ↗
21. Zintl phase compounds AM2Sb2 (A = Ca, Sr, Ba, Eu, Yb; M = Zn, Cd) and their substitution variants: a class of potential thermoelectric materials10.1016/S1002-0721(12)60398-6 ↗
22. On the ferrimagnetism of some suphides and oxides: 3. Oxygen and sulphur spinels containing chromium (MCr2O4 and MCr2S4)
23. Structural and magnetic studies of metal-insulator transition in thiospinel CuIr2S410.1143/JPSJ.63.3333 ↗
24. Formation of isomorphic Ir 3+ and Ir 4+ octamers and spin dimerization in the spinel CuIr2S410.1038/416155a ↗
25. Superconductivity in spinel-type compounds CuRh2S4 and CuRh2Se410.1103/PhysRevB.51.12673 ↗
26. Chalcogenide materials and their application to non-volatile memories10.1016/j.mee.2010.06.042 ↗
27. Chalcogenide microstructured optical fibers for infrared applications10.1533/9780857093561.2.411 ↗
28. The synthesis and characterisation of Cu 2 MX 4 (M = W or Mo; X = S, Se or S/Se) materials prepared by a solvothermal method10.1039/b507129a ↗
29. Two-dimensional square ternary Cu 2 MX 4 (M = Mo, W; X = S, Se) monolayers and nanoribbons predicted from density functional theory10.1103/PhysRevB.89.125423 ↗
30. Electronic structure calculations of solids using the WIEN2k package for material sciences.10.1016/S0010-4655(02)00206-0 ↗
31. BoltzTraP. A code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. First-principles study of the optical properties of pure α-Al2O3 and La aluminates10.1140/epjb/e2005-00076-8 ↗
34. Electronical and thermoelectric properties of half-Heusler ZrNiPb under pressure in bulk and nanosheet structures for energy conversion10.1007/s12598-019-01235-0 ↗
35. Copper molybdenum sulfide: a new efficient electrocatalyst for hydrogen production from water10.1039/c2ee22611a ↗
36. Investigation of optical and device parameters of colloidal copper tungsten selenide ternary nanosheets10.1007/s10854-017-7970-7 ↗
37. Two-dimensional square ternary Cu2 MX 4 (M = Mo, W; X = S, Se) monolayers and nanoribbons predicted from density functional theory10.1103/PhysRevB.89.125423 ↗
38. Finite elastic strain of cubic crystals10.1103/PhysRev.71.809 ↗
39. The synthesis and characterisation of Cu2 MX 4 (M = W or Mo; X = S, Se or S/Se) materials prepared by a solvothermal method10.1039/b507129a ↗
40. Investigation of optical and device parameters of colloidal copper tungsten selenide ternary nanosheets10.1007/s10854-017-7970-7 ↗
41. Thermal properties of semiconductor low-dimensional structures
42. Computational prediction of structural, electronic, and optical properties and phase stability of double perovskites K 2 SnX 6 (X = I, Br, Cl).10.1039/C9RA09232C ↗
43. Optical properties of solids10.1119/1.1691372 ↗
44. Screened coulomb hybrid DFT investigation of band gap and optical absorption predictions of CuVO3, CuNbO3 and Cu5 Ta 11 O 30 materials10.1039/C4CP02497D ↗
45. Highly ordered lead-free double perovskite halides by design10.1016/j.jmat.2020.05.008 ↗
46. Electronic structure, optical and dielectric properties of BaTiO3/CaTiO3/SrTiO3 ferroelectric superlattices from first-principles calculations10.1039/C5TC01622C ↗
47. Resonant levels in bulk thermoelectric semiconductors10.1039/C1EE02612G ↗
48. New and old concepts in thermoelectric materials10.1002/anie.200900598 ↗
49. Band engineering of thermoelectric materials10.1002/adma.201202919 ↗
50. Complex thermoelectric materials
51. First-principles calculations of thermoelectric properties of IV–VI chalcogenides 2D materials10.3389/fmech.2017.00015 ↗