journal article·2022-04-01

Plasma-Induced Modifications on High Density Polyethylene and Polyethylene Terephthalate

E. Abdeltwab, A. Atta

Publisher page

Abstract

This work presents comprehensive study of high density polyethylene (HDPE) and polyethylene terephthalate (PET) surface properties after exposed to 1.5, 3, 4.5 and 6 min oxygen (O 2 ) plasma. The polymer surface structure is analyzed by Raman spectroscopy, which revealed surface restructuring modifications. The contact angle of HDPE and PET decreased gradually, and the work of adhesion is improved with O 2 plasma. The water contact angle is reduced from 61.6° to 36.3° for HDPE and from 72.4° to 37.5° for PET by increasing plasma time from 1.5 to 6 min. The surface free energy is enhanced from 27.8 mJ m −2 to 69.0 mJ m −2 for HDPE and from 29.8 mJ m −2 to 67.2 mJ m −2 for PET, when the plasma time increased from 0 to 6 min. The polar groups significantly reduced the hydrophobicity of the irradiated films, and consequently the surface wettability is improved. The results showed observed improvement in surface properties of HDPE and PET polymeric films to be use in different applications such as printings, coatings and optoelectronics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Recent advances in the fabrication and functionalization of flexible optical biosensors: toward smart life-sciences applications10.3390/bios11040107 ↗
2. Conductive polymer nanocomposites for stretchable electronics: material selection, design, and applications10.1021/acsami.1c15014 ↗
3. Polymer prioritization framework: a novel multi-criteria framework for source mapping and characterizing the environmental risk of plastic polymers10.1016/j.jhazmat.2022.128330 ↗
4. Novel application of a thermoplastic composite with improved matrix-fiber interface10.1016/j.jmrt.2019.09.022 ↗
5. Atmospheric pressure dielectric barrier discharges for the deposition of organic plasma polymer coatings for biomedical application10.1007/s11090-020-10135-6 ↗
6. Atmospheric plasma torch treatment of polyethylene/boron composites: effect on thermal stability10.1016/j.surfcoat.2013.11.020 ↗
7. Long-term surface modification of PEEK polymer using plasma and PEG silane treatment10.1016/j.surfin.2021.101253 ↗
8. Cold atmospheric pressure plasma technology for modifying polymers to enhance adhesion: a critical review10.7569/RAA.2021.097306 ↗
9. Evaluation of cross-linking and degradation processes occurring at polymer surfaces upon plasma activation via size-exclusion chromatography.10.1016/j.polymdegradstab.2021.109543 ↗
10. Functionalization of crumb rubber surface for the incorporation into asphalt layers of reduced stiffness: an overview of existing treatment approaches10.3390/recycling6010019 ↗
11. Different techniques used for plasma modification of polyolefin surfaces
12. Oxygen plasma surface treatment of polymer films—pellethane 55DE and EPR-g-VTMS10.1016/j.apsusc.2020.147782 ↗
13. Surface modification of PS polymer by oxygen-atom treatment from remote plasma: initial kinetics of functional groups formation10.1016/j.apsusc.2021.150058 ↗
14. Direct bonding and de‐bonding on demand of polystyrene and polyamide surfaces, treated with oxygen plasma10.1002/app.51753 ↗
15. Atmospheric pressure plasma hydrophilic modification of a silicone surface10.1080/00218464.2012.659994 ↗
16. Mechanism of adhesion of natural polymer coatings to chemically modified siloxane polymer10.1021/acs.langmuir.1c00047 ↗
17. Development of improved polypropylene adhesive bonding by abrasion and atmospheric plasma surface modifications10.1016/j.ijadhadh.2011.10.002 ↗
18. Oxygen plasma irradiation-induced surface modifications on HDPE and PET polymeric films10.1007/s40042-021-00224-w ↗
19. SRIM–The stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
20. Study of high energy (MeV) N6 + ion and gamma radiation induced modifications in low density polyethylene (LDPE) polymer10.1016/j.nimb.2013.02.014 ↗
21. Oxygen ion induced variations in the structural and linear/nonlinear optical properties of the PVA/PANI/Ag nanocomposite film10.1016/j.inoche.2021.108926 ↗
22. Nitrogen plasma effect on the structural, thermal, and dynamic mechanical properties of PVA/starch/graphene oxide nanocomposite10.1007/s00339-021-04671-x ↗
23. Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment10.1016/j.eurpolymj.2006.02.001 ↗
24. Modification of poly (dimethylsiloxane) by mesostructured siliceous films for constructing protein-interactive surfaces10.1380/ejssnt.2018.41 ↗
25. Characterization of hybrid biocomposite Poly-Butyl-Succinate/Carbon fibers/Flax fibers10.1016/j.compositesb.2021.109033 ↗
26. Modulation of structure, morphology and wettability of polytetrafluoroethylene surface by low energy ion beam irradiation10.1016/j.nimb.2013.02.004 ↗
27. Improved surface energy analysis for plasma treated PET films10.1002/ppap.200732405 ↗
28. Plasma-etching and modification of polyethylene for improved surface structure, wettability and optical behavior10.1142/S0218625X18502207 ↗
29. Atmospheric pressure plasma surface treatment of polymers and influence on cell cultivation10.3390/molecules26061665 ↗
30. III. An essay on the cohesion of fluids10.1098/rstl.1805.0005 ↗
31. Attractive forces at interfaces10.1021/ie50660a008 ↗
32. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
33. The effect of PVD layer constitution on surface free energy10.1016/S0040-6090(99)00543-X ↗
34. Influence of ion irradiation on the surface properties of silver-coated flexible PDMS polymeric films10.1007/s13538-021-01011-5 ↗
35. Extreme durability of wettability changes on polyolefin surfaces by atmospheric pressure plasma torch10.1016/j.surfcoat.2010.06.069 ↗
36. Aging effects on low-and high-density polyethylene, polypropylene and polystyrene under UV irradiation: an insight into decomposition mechanism by Py-GC/MS for microplastic analysis.10.1016/j.jaap.2021.105207 ↗