Terahertz and UV–VIS Spectroscopy Evaluation of Copper Doped Zinc Magnesium Titanate Nanoceramics Prepared via Sol-Gel Method
Source abstract
Abstract
In this work, the copper-doped zinc magnesium titanate (ZMT) nanoceramics were prepared by the precursor sol-gel method. The microstructure and surface morphological characteristics of the prepared nanoceramics were established by using X-ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy approaches. XRD confirms the formation of zinc, magnesium, and copper titanate in the prepared nanoceramic calcined at 700 °C. The samples had shown a strong response of charge carriers in the THz range. The change in THz absorbance spectra with increasing Cu content can be related to the internal transitions that occurred in the ZMT matrix. UV–vis evaluation demonstrates an initial increase in bandgap energy at 0.3 wt.% Cu and then decreases by Cu content increase as a result of s-d and p-d exchange interaction. The prepared copper doped zinc magnesium titanate (ZMT) nanoceramics can be employed in optoelectronic and photocatalysis applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Inorganic Chemistry and Materials · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. The structure and properties of zinc titanate doped with strontium10.1016/S0925-8388(02)01362-2 ↗
2. Hammad: Identification of Fe3 + co-doped zinc titanate mesostructures using dielectric and antimicrobial activities10.1007/s13762-020-02786-x ↗
3. Physical, structural, conductive and magneto-optical properties of rare earths (Yb, Gd) doped Ni–Zn spinel nanoferrites for data and energy storage devices10.1016/j.ceramint.2021.01.028 ↗
4. Interface-charge induced giant electrocaloric effect in lead free ferroelectric thin-film bilayers10.1021/acs.nanolett.9b04727 ↗
5. Mixed Mg–Co spinel ferrites: structure, morphology, magnetic and photocatalytic properties10.1016/j.jallcom.2020.157429 ↗
6. Study of optoelectronic and transport properties of MgLu2Z4 (Z = S, Se) spinels for optoelectronic and energy harvesting applications10.1016/j.mssp.2020.105452 ↗
7. Theoretical investigations of optoelectronic and thermoelectric properties of the XIn2O4 (X = Mg, Zn, Cd) spinel oxides10.1016/j.jpcs.2020.109481 ↗
8. Spin-dependent rare-earth-based MgPr2X4 (X = S, Se) spinels investigations for spintronic and sustainable energy systems applications10.1016/j.rinp.2020.103709 ↗
9. Strong magnetic coupling between antiferromagnetic and ferromagnetic phases in polycrystalline hollow nanoparticles composed of spinel solid solution10.1016/j.jallcom.2020.157607 ↗
10. Structure, superconducting properties and stoichiometry of Li1-xTi2O4 spinel single crystals10.1016/0921-4534(91)91481-I ↗
11. Superconducting properties in the Li1+xTi2-xO4 system with the spinel structure10.1016/0022-4596(88)90264-2 ↗
12. Synergistic effect of bulk phase doping and layered-spinel structure formation on improving electrochemical performance of Li-Rich cathode material10.1016/j.ceramint.2020.11.113 ↗
13. Electrochemical behavior of the flower shaped CoMn2O4 spinel structure assembled for effective HER from water splitting10.1016/j.electacta.2021.138168 ↗
14. Enhancing the thermal shock resistance of alumina-rich magnesium aluminate spinel refractories by an aluminum titanate phase10.1016/j.ceramint.2016.06.037 ↗
15. properties of zinc titanates synthesized by microwave assisted hydrothermal method10.1016/j.heliyon.2021.e06521 ↗
16. Luminescence dynamics of Eu3 + activated and co-activated defect spinel zinc titanate nanophosphor for applications in WLEDs10.1016/j.jallcom.2020.156660 ↗
17. Structural and optoelectronic properties of the zinc titanate perovskite and spinel by modified Becke–Johnson potential10.1016/j.physb.2013.03.042 ↗
18. Thermodynamic properties of strontium titanates: Sr2TiO4, Sr3Ti2O7, Sr4Ti3O10, and SrTiO310.1016/j.jct.2010.08.011 ↗
19. Comparative Raman spectroscopic study on ilmenite-type MgSiO3 (akimotoite), MgGeO3, and MgTiO3 (geikielite) at high temperatures and high pressures10.2138/am.2008.2490 ↗
20. Facile synthesis and potential application of Ni0.6Zn0.4Fe2O4 and Ni0.6Zn0.2Ce0.2Fe2O4 magnetic nanocubes as a new strategy in sewage treatment10.1016/j.jenvman.2020.110816 ↗
21. Influence of MgO addition on the synthesis and electrical properties of sintered zinc-titanate ceramics10.1016/j.jallcom.2008.03.090 ↗
22. Microwave composite dielectrics based on magnesium titanates10.1016/j.jeurceramsoc.2006.11.022 ↗
23. High performance of talented copper/magneso-zinc titanate nanostructures as biocidal agents for inactivation of pathogens during wastewater disinfection10.1007/s13204-020-01454-3 ↗
24. Effect of TiO2 on electrical and magnetic properties of Ni0.35Cu0.12Zn0.35Fe2O4 synthesized by the microwave-hydrothermal method10.1016/j.jpcs.2013.04.014 ↗
25. Low temperature nanostructured zinc titanate by an aqueous particulate sol-gel route: optimisation of heat treatment condition based on Zn:Ti molar ratio10.1016/j.jeurceramsoc.2009.09.031 ↗
26. Synthesis, formation and characterization of ZnTiO3 ceramics10.1016/j.ceramint.2004.01.002 ↗
27. Synthesis and high (pressure, temperature) stability of ZnTiO3 polymorphs studied by Raman spectroscopy10.1016/j.solidstatesciences.2015.03.014 ↗
28. Effect of phase transformation on optical and dielectric properties of pulsed laser deposited ZnTiO3 thin films10.1016/j.spmi.2016.02.018 ↗
29. Mechanical and electrochemical properties of cubic and tetragonal LixLa0.557TiO3 perovskite oxide electrolytes10.1016/j.ceramint.2017.10.129 ↗
30. Effect of the sintering temperature on the photocatalytic activity of ZnO + Zn2TiO4 thin films10.1016/j.solmat.2007.04.021 ↗
31. Facile synthesis of noble-metal free polygonal Zn2TiO4 nanostructures for highly efficient photocatalytic hydrogen evolution under solar light irradiation10.1016/j.ijhydene.2018.05.035 ↗
32. ZnO–TiO2 composites and ternary ZnTiO3 electrospun nanofibers: the influence of annealing on the photocatalytic response and reusable functionality10.1039/C8CE00920A ↗
33. Improved visible-light photocatalytic activity in ZnTiO3 nanopowder prepared by sol-electrospinning10.1016/j.solmat.2017.01.020 ↗
34. Ferrites Obtained by Sol–Gel Method10.1007/978-3-319-19454-7_125-1 ↗
35. Decontamination of ubiquitous harmful microbial lineages in water using an innovative Zn2Ti0.8Fe02O4 nanostructure: dielectric and terahertz properties10.1016/j.heliyon.2019.e02501 ↗
36. Adjustment of morphological and dielectric properties of ZnTiO3 nanocrystalline using Al2O3 nanoparticles10.1007/s00339-018-2350-6 ↗
37. Phase structure and the dielectric properties of the (Zn, Mg) 2(Ti, Sn)O4 ceramics10.1016/j.jallcom.2014.05.091 ↗
38. Influence of the anion nature on styryl dye crystal packing and feasibility of the direct and back [2 + 2] photocycloaddition reactions without single crystal degradation10.1039/C4CE00266K ↗
39. Data descriptor: high-throughput computational X-ray absorption spectroscopy10.1038/sdata.2018.151 ↗
40. Computational approach for epitaxial polymorph stabilization through substrate selection10.1021/acsami.6b01630 ↗
41. Vesta: a three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
42. Wang · Prog. Org. Coatings · 2009 · 64 · 32710.1016/j.porgcoat.2008.08.010 ↗
43. Optically transparent silica aerogels based on sodium silicate by a two step sol-gel process and ambient pressure drying10.1016/j.solidstatesciences.2012.12.016 ↗
44. Fabrication and characterization of ZnTiO3/Zn2Ti3O8/ZnO ternary photocatalyst for synergetic removal of aqueous organic pollutants and Cr(VI) ions10.1016/j.scitotenv.2019.136026 ↗
45. Fe-doped and ZnO-pillared titanates as visible-light-driven photocatalysts10.1016/j.jcis.2011.03.021 ↗
46. Terahertz electro-optic properties of PbZr0.52Ti0.48O3 and BaTiO3 ferroelectric thin films10.1063/1.4896036 ↗
47. Subterahertz dielectric relaxation in lead-free Ba(Zr,Ti)O3 relaxor ferroelectrics10.1038/ncomms11014 ↗
48. High efficiency THz-wave modulators based on conjugated polymer-based organic films10.1088/0022-3727/49/7/075111 ↗
49. Structural study of Ca0.7Nd0.3Ti0.7 Al0.3O3 dielectric ceramics using synchrotron X-ray diffraction10.1016/S0955-2219(03)00148-1 ↗
50. Electrically tuned transmission and dielectric properties of illuminated and non-illuminated barium titanate thin film in terahertz regime10.1016/j.jallcom.2018.02.002 ↗
51. Magnetization states of canted antiferromagnetic YFeO3 investigated by terahertz time-domain spectroscopy10.1063/1.4937158 ↗
52. Sol–gel synthesis and physical characterization of high impact polystyrene nanocomposites based on Fe2O3 doped with ZnO10.1007/s00339-020-03822-w ↗
53. Effect of Cu incorporation on morphology and optical band gap properties of nano-porous lithium magneso-silicate (LMS) thin films10.1088/2053-1591/aae343 ↗
54. Structural studies of sol gel prepared nano-crystalline silica zinc titanate ceramic
55. Characterization of electrical and optical absorption of organic based methyl orange for photovoltaic application10.1016/j.synthmet.2011.08.015 ↗
56. Electrical conductivity, dielectric properties and optical absorption of organic based nanocrystalline sodium copper chlorophyllin for photodiode application10.1016/j.jallcom.2011.10.058 ↗
57. Uniformly embedded cellulose/polypyrrole-TiO2 composite in sol-gel sodium silicate nanoparticles: structural and dielectric properties10.1007/s12633-018-9910-4 ↗
58. Structural and optical properties of nanosized ZnO/ZnTiO3 composite materials synthesized by a facile hydrothermal technique10.1007/s10854-017-7207-9 ↗
59. Fabrication and Characterization of a Photodiode Based on 5′,5′′-dibromo-o-cresolsulfophthalein (BCP)10.1007/s12633-018-0016-9 ↗
60. Thermal, dielectric and antimicrobial properties of polystyrene-assisted/ITO:Cu nanocomposites10.1007/s00339-018-2350-6 ↗
61. Green sol–gel synthesis of novel nanoporous copper aluminosilicate for the eradication of pathogenic microbes in drinking water and wastewater treatment10.1007/s11356-019-04431-8 ↗
62. Effect of Cu-doping on structural, optical and photoluminescence properties of zinc titanates synthesized by solid state reaction10.1007/s10854-016-4290-2 ↗
63. Amrani: Effect of the magnetic order on the optical-absorption edge in Cd1-xMnxTe10.1103/PhysRevB.31.7995 ↗
64. Structural, FTIR and photoluminescence studies of Cu doped ZnO nanopowders by co-precipitation method10.1016/j.optmat.2012.06.004 ↗
65. Structural and optical properties of pure and copper doped zinc oxide nanoparticles10.1016/j.rinp.2018.04.010 ↗
66. Magnetism and band gap narrowing in Cu-doped ZnO10.1063/1.3112603 ↗
67. Dependence of energy gap on x and T in Zn1-xMnxSe: the role of exchange interaction10.1103/PhysRevB.33.8207 ↗