Particle Cleaning Technologies to Meet Advanced Semiconductor Device Process Requirements
Source abstract
Abstract
Dealing with nanometer-sized particulate contamination is still one of the major challenges during the manufacturing of yielding semiconductor devices. This is especially true for the increasing number of critical processing steps, where residues of particulate matter need to be removed without mechanically damaging sensitive device patterns and, at the same time, achieve the lowest possible substrate loss. If higher substrate loss would be permitted, a more or less pure chemical mechanism could be employed (e.g. particle undercut by substrate etching and lift-off). However, being only allowed to have statistically seen sub-Angstrom material loss, physical forces need to be integrated jointly with the appropriate chemical support. In this paper we describe particle cleaning techniques, which are based on monodisperse droplet impact, controlled bubble cavitation (acoustic and laser induced), moving contact lines as well as normal-directed extensional flow to meet present and future industry requirements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasound and Cavitation Phenomena · Fluid Dynamics and Heat Transfer · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Li X. Strojwas A. J. Swecker A. L. Reddy M. Milor L. Lin Y. T. , Modeling of defect propagation/growth for yield impact prediction in VLSI manufacturing, in Proc. SPIE 3216, Microelectronic Manufacturing Yield, Reliability, and Failure Analysis III, 167 (September 11, 1997).10.1117/12.284699 ↗
2. International Technology Roadmap for Semiconductors, ITRS 2012 UPDATE, http://www.itrs.net/Links/2012ITRS/Home2012.htm.
3. Meuris · Solid State Technol. · 1995 · 38 · 109
4. Kern W. , Handbook of Semiconductor wafer cleaning technology, Noyes Publications, New Jersey (1993).
5. 10.1016/0009-2509(68)89039-610.1016/0009-2509(68)89039-6 ↗
6. 10.1006/jcis.1997.498410.1006/jcis.1997.4984 ↗
7. 10.1016/0166-6622(84)80096-710.1016/0166-6622(84)80096-7 ↗
8. 10.1023/A:100423083166710.1023/A:1004230831667 ↗
9. 10.1016/S0009-2509(96)00397-110.1016/S0009-2509(96)00397-1 ↗
10. 10.1016/j.jcis.2008.07.03010.1016/j.jcis.2008.07.030 ↗
11. 10.1017/S002211209800873810.1017/S0022112098008738 ↗
12. 10.1016/j.ultsonch.2004.01.00610.1016/j.ultsonch.2004.01.006 ↗
13. 10.1063/1.308982010.1063/1.3089820 ↗
14. 10.1016/j.ultsonch.2010.10.00410.1016/j.ultsonch.2010.10.004 ↗
15. Mettin R. , From a single bubble to bubble structures in acoustic cavitation. In: Kurz T. Parlitz U. Kaatze U. (eds.): Oscillations, Waves and Interactions, Universitätsverlag Göttingen, Göttingen, 2007, pp. 171-198;
16. 10.1016/j.apacoust.2008.09.01610.1016/j.apacoust.2008.09.016 ↗
17. 10.4028/www.scientific.net/SSP.103-104.15510.4028/www.scientific.net/SSP.103-104.155 ↗
18. Nyborg W. L. , Acoustic streaming. In: Mason W. P. (ed.): Physical Acoustics, Band 2B , Seiten 265–331, New York, 1965. Academic Press.10.1016/B978-0-12-395662-0.50015-1 ↗
19. 10.1016/0022-460X(78)90388-710.1016/0022-460X(78)90388-7 ↗
20. 10.1109/58.39310510.1109/58.393105 ↗