journal article·2023-03-01

Investigation on the Processing Quality of Nanosecond Laser Stealth Dicing for 4H-SiC Wafer

Qi Song, Zhe Zhang, Ziye Xu, Zhidong Wen, Haiyan Shi, Kunpeng Zhang, Man Li, Zichen Zhang, Yu Hou, Zhengxun Song

Publisher page

Abstract

Silicon carbide (SiC), due to its characteristic materials performance, gets more attention in Radio Frequecy (RC) and High-power device fabrication. However, SiC wafer dicing has been a tricky task because of the high hardness and brittleness. The blade dicing suffers from poor efficiency and debris contaminants. Furthermore, the laser ablation dicing and Thermal Laser Separation (TSL) can have thermal damage and irregular crack propagation. In this study, Stealth Dicing (SD) with nanosecond pulse laser method was applied to 4H-SiC wafer. A series of experiments were conducted to analyze the influences of different parameters on cross section and surface. An edge defect less than 3 μm and cross section with roughness of about 0.8 μm was achieved. And the three-point stress test was applied to obtain the die strength. Besides, a novel method of double pulse inducing cracks growth was proposed for the first time to optimize the surface edge. Finite Element Analysis (FEA) verifed the feasibility. Through experiments, the edge defect decreased to less than 2 μm. This work contributes to the wafer Stealth Dicing application for SiC and advance semiconductor materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Laser Material Processing Techniques · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. SEM, AFM and TEM studies for repeated irradiation effect of femtosecond laser on 4H-SiC surface morphology at near threshold fluence10.1149/2.0421712jss ↗
2. S Feng. Micromachining of 4H-SiC using femtosecond laser10.1016/j.ceramint.2018.06.245 ↗
3. Comparison of different novel chip separation methods for 4H-SiC10.4028/www.scientific.net/MSF.821-823.520 ↗
4. Thermal laser separation - a novel dicing technology fulfilling the demands of volume manufacturing of 4h-sic devices10.4028/www.scientific.net/MSF.821-823.528 ↗
5. 4H-SiC wafer slicing by using femtosecond laser double-pulses10.1364/OME.7.002450 ↗
6. High quality and high speed cutting of 4H-SiC JFET wafers including PCM structures by using Thermal Laser Separation10.1557/opl.2014.566 ↗
7. Advanced dicing technology for semiconductor wafer—stealth dicing10.1109/TSM.2007.901849 ↗
8. The stealth dicing technologies and their application
9. Laser-matter interaction in the bulk of a transparent solid: Confined microexplosion and void formation10.1103/PhysRevB.73.214101 ↗
10. Die singulation technologies for advanced packaging: A critical review10.1116/1.3700230 ↗
11. Brittle fracture and the behaviour of cracks in structures10.1533/9781782423911.1.45 ↗
12. Internal modified-layer formation mechanism into silicon with nanosecond laser10.1299/kikaic.74.446 ↗
13. Analysis of processing mechanism in stealth dicing of ultra thin silicon wafer10.1299/JAMDSM.2.540 ↗
14. Internal modification of ultra thin silicon wafer by permeable pulse laser10.2493/jjspe.74.275 ↗
15. Analysis of internal crack propagation in silicon due to permeable pulse laser irradiation: study on processing mechanism of stealth dicing10.1117/12.887431 ↗
16. Characterization and control of laser induced modification inside silicon10.2351/7.0004080 ↗
17. Numerical simulation and validation of subsurface modification and crack formation induced by nanosecond-pulsed laser processing in monocrystalline silicon10.1063/1.5130701 ↗
18. A new approach to wafer sawing: stealth laser dicing technology10.1109/IMPACT.2015.7365231 ↗
19. Alternative dicing solution of Multi-Project Wafer (MPW) by Stealth Dicing10.1109/EPTC.2016.7861488 ↗
20. GaN-based light-emitting diodes prepared with shifted laser stealth dicing10.1109/JDT.2015.2478598 ↗
21. Good-quality and high-efficiency dicing for thick linbo3 wafers using picosecond laser pulses10.3390/mi11010051 ↗
22. Precision layered stealth dicing of sic wafers by ultrafast lasers10.3390/mi13071011 ↗
23. One-step femtosecond laser stealth dicing of quartz10.3390/mi11030327 ↗
24. Dual laser beam asynchronous dicing of 4h-sic wafer10.3390/mi12111331 ↗
25. Multi-strata subsurface laser die singulation to enable defect-free ultra-thin stacked memory dies10.1063/1.4921205 ↗
26. Multistrata subsurface laser-modified microstructure with backgrind-assisted controlled fracture for defect-free ultrathin die fabrication10.1109/TCPMT.2015.2435369 ↗
27. Multi-strata stealth dicing before grinding for singulation-defects elimination and die strength enhancement: experiment and simulation10.1109/TSM.2015.2438875 ↗
28. Die stress in stealth dicing for MEMS10.1109/ITHERM.2016.7517595 ↗
29. Thermo-elastic-plastic analysis on internal processing phenomena of single-crystal silicon by nanosecond laser10.2961/jlmn.2006.03.0016 ↗
30. The optical absorption bands and their anisotropy in the various modifications of SiC10.1016/0038-1098(65)90092-X ↗
31. Numerical simulation and validation of subsurface modification and crack formation induced by nanosecond-pulsed laser processing in monocrystalline silicon10.1063/1.5130701 ↗
32. Effects of stealth dicing parameters on singulation defects and die strength10.1109/ICEPT50128.2020.9202940 ↗
33. Analysis of the influence of burst-mode laser ablation by modern quality tools10.1016/j.phpro.2011.03.119 ↗