journal article·2023-04-01Open access

A CNTFET Based Bit-Line Powered Stable SRAM Design for Low Power Applications

Ashish Sachdeva, Lipika Gupta, Kulbhushan Sharma, M. Elangovan

Abstract

Higher charge mobility, gate control, and better electrostatics are the key reasons that make carbon nanotube field effect transistor (CNTFET) a better candidate to become the successor of conventional CMOS transistors. However, the increased charge mobility also enhances the leakage power. This work uses CNTFET for designing a low-power eight-transistor static random access memory (8T SRAM) cell. The leakage power of the proposed cell is reduced by 2.21×compared to conventional 6T SRAM at 0.3V with similar CNTFET parameters. The read and write power delay product of the proposed design is improved by 1.02×and 1.85×, respectively. Moreover, the read/ write/ hold static noise margin of the proposed cell is also enhanced by 1.98×/ 0.99×/ 1.01×, respectively, compared to the conventional 6T design. The proposed cell is also compared with three already proposed CNTFET based 8T SRAM designs. Cadence Virtuoso simulation tool and Stanford University 32 nm CNTFET verilog-A model file are used to achieve simulation results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Low-power high-performance VLSI design · Advancements in Semiconductor Devices and Circuit Design · Quantum-Dot Cellular Automata

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Orton · 2008
2. Leblebici · 1996
3. Radamson · Micromachines · 2019 · 10 · 29310.3390/mi10050293 ↗
4. Why is cmos scaling coming to an end?10.1109/IDT.2008.4802475 ↗
5. Filipovic · Special Issue on Miniaturized Transistors · 2022 · 2 · 1
6. Hot-electron-induced mosfet degradation-model, monitor, and improvement10.1109/JSSC.1985.1052306 ↗
7. Negative bias temperature instability: Road to cross in deep submicron silicon semiconductor manufacturing10.1063/1.1567461 ↗
8. Design of a stable single sided 11t static random access memory cell with improved critical charge10.1002/jnm.3076 ↗
9. Carbon nanotubes in agriculture: production, potential, and prospects10.1007/978-981-32-9370-0_8 ↗
10. 2023
11. Radiation effects in advanced multiple gate and silicon-on-insulator transistors10.1109/TNS.2013.2255313 ↗
12. Time dependent dielectric breakdown physics-models revisited10.1016/j.microrel.2012.06.007 ↗
13. Highly-efficient cntfet-based unbalanced ternary logic gates10.1149/2162-8777/acc137 ↗
14. Current status of reliability in extended and beyond cmos devices10.1109/TDMR.2014.2348940 ↗
15. Assessment of structure variation in silicon nanowire fets and impact on sram10.1016/j.mejo.2011.12.002 ↗
16. Carbon nanotube field effect transistor: basic characterization and effect of high dielectric material
17. Graphene transistors: status, prospects, and problems10.1109/JPROC.2013.2257633 ↗
18. Performance analysis and yield estimation for a negative capacitance field effect transistor-based eight-transistor static random access memory10.1088/1361-6641/ac0d99 ↗
19. Nonvolatile static random access memory based on spin-transistor architecture10.1063/1.3076895 ↗
20. A single-bitline 9t sram for low-power near-threshold operation in finfet technology10.1007/s13369-022-06821-6 ↗
21. Tunneling field-effect transistors (tfets) with subthreshold swing (ss) less than 60 mv/dec10.1109/LED.2007.901273 ↗
22. Effect of temperature on analog performance of mg2si source heterojunction double gate tunnel field effect transistor10.1016/j.matpr.2020.04.834 ↗
23. Chemical modulation of conducting polymer gate electrode work function based double gate mg2si tfet for gas sensing applications10.1007/s10854-021-07597-5 ↗
24. Performance investigation of hetero gate dielectric dgtfet with drain pocket for analog/rf applications10.1016/j.matpr.2022.08.195 ↗
25. Reliability analysis of cost-efficient ch3nh3pbi3 based dopingless tunnel fet10.1088/1361-6641/ac38bb ↗
26. Impact of a process variation on nanowire and nanotube device performance10.1109/TED.2007.901882 ↗
27. Comparing carbon nanotube transistors-the ideal choice: a novel tunneling device design10.1109/TED.2005.859654 ↗
28. Design and analysis of low-power adiabatic logic circuits by using cntfet technology10.1007/s00034-019-01059-4 ↗
29. A universal method for designing low-power carbon nanotube fet-based multiple-valued logic circuits10.1049/iet-cdt.2013.0023 ↗
30. A compact spice model for carbon-nanotube field-effect transistors including nonidealities and its applicationpart i: Model of the intrinsic channel region10.1109/TED.2007.909030 ↗
31. Carbon nanotube-based polymer composites: synthesis, properties and applications10.5772/62497 ↗
32. A carbon nano-tube field effect transistor based stable, low-power 8t static random access memory cell with improved write access time10.1016/j.aeue.2023.154565 ↗
33. A compact spice model for carbon-nanotube field-effect transistors including nonidealities and its applicationpart ii: Full device model and circuit performance benchmarking10.1109/TED.2007.909043 ↗
34. 2023
35. A low power 8t sram cell design technique for cnfet
36. Stable sram cell design for the 32 nm node and beyond10.1109/.2005.1469239 ↗
37. A comparison of cntfet and cmos technology through the design of a sram cell10.1149/2.0141901jss ↗
38. Optimization of the aspect ratio to enhance the power and noise-margin of a standard 6t (s6t)-sram cell10.1109/ICERECT56837.2022.10060859 ↗
39. Design of a cntfet-based sram cell by dual-chirality selection10.1109/TNANO.2009.2025128 ↗
40. Reliable high-yield cntfet-based 9t sram operating near threshold voltage region10.1007/s10825-017-1127-z ↗
41. A novel robust and low-leakage sram cell with nine carbon nanotube transistors10.1109/TVLSI.2014.2350674 ↗
42. Carbon nanotube sram design with metallic cnt or removed metallic cnt tolerant approaches10.1109/TNANO.2012.2197636 ↗
43. Performance evaluation of single-ended disturb-free cntfet-based multi-v t sram10.1016/j.mejo.2019.05.015 ↗
44. A study on the circuit design method of cntfet sram considering carbon nanotube density10.7471/ikeee.2021.25.3.473 ↗
45. Realistic cnfet based sram cell design for better write stability10.1109/ASQED.2009.5206307 ↗
46. A multi-bit error upset immune 12t sram cell for 5g satellite communications10.1007/s11277-021-08462-8 ↗
47. Energy-efficient single-ended read/write 10t near-threshold sram10.1109/TCSI.2023.3247807 ↗
48. One-sided schmitt-trigger-based 9t sram cell for near-threshold operation10.1109/TCSI.2020.2964903 ↗
49. Characterization of half-select free write assist 9t sram cell10.1109/TED.2019.2942493 ↗
50. A reliable low standby power 10t sram cell with expanded static noise margins10.1109/TCSI.2021.3138849 ↗
51. Pseudo differential multi-cell upset immune robust sram cell for ultra-low power applications10.1016/j.aeue.2017.09.022 ↗
52. A 32 kb 10t sub-threshold sram array with bit-interleaving and differential read scheme in 90 nm cmos10.1109/JSSC.2008.2011972 ↗
53. 40 nm bit-interleaving 12t subthreshold sram with data-aware write-assist10.1109/TCSI.2014.2332267 ↗
54. Characterization of stable 12t sram with improved critical charge10.1142/S0218126622500232 ↗
55. An 8t low-voltage and low-leakage half-selection disturb-free sram using bulk-cmos and finfets10.1109/TED.2014.2321295 ↗
56. A single-ended low leakage and low voltage 10t sram cell with high yield10.1007/s10470-020-01669-y ↗
57. A highly stable low-energy 10t sram for near-threshold operation10.1109/TCSI.2022.3207992 ↗
58. Design of a 32nm 7t sram cell based on cntfet for low power operation10.1109/ICDCSyst.2012.6188756 ↗
59. Darlington based 8t cntfet sram cells with low power and enhanced write stability10.1007/s42341-021-00329-w ↗
60. Design and analysis of cntfet based 10t sram for high performance at nanoscale10.1002/cta.2696 ↗