Review—Airborne Molecular Contamination: Recent Developments in the Understanding and Minimization for Advanced Semiconductor Device Manufacturing
Source abstract
Abstract
This review paper focuses on the recent knowledge about airborne molecular contamination (AMC) and its impacts on 300-mm wafer fabrication processes. The adverse impacts on process materials by both organic and inorganic micro-contaminants, and evidence of cross-contamination between processed wafers and the mainstream wafer handling tools, are two areas of discussion for the study. The review also aims to re-frame the industrial guideline for AMC from chemical-based to risk-based approach, which substantiates the potential impacts of individual families of AMCs that have been well-documented. This approach resonates well with the new AMC classification method recently proposed by the International Roadmap of Devices and Systems (IRDS), building on new knowledge of AMC emerged over time with the advances of analytical and testing capability. The review also brings forth the impact of moisture, the mere presence of which can compromise the integrity of device structures. However, moisture is especially detrimental in the presence of other inorganic ions to trigger unwanted reactions with surface materials. Methods developed to minimize the micro-contaminants and moisture during wafer handling and storage are also reviewed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Experience-Based Knowledge Management · Recycling and Waste Management Techniques · Conservation Techniques and Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Organic airborne molecular contamination in semiconductor fabrication clean rooms: a review10.1149/1.2147286 ↗
2. Effects of organic contaminants during metal oxide semiconductor processes10.1149/1.2904453 ↗
3. Adsorption behavior of two model airborne organic contaminants on wafer surfaces10.1016/j.cej.2012.01.067 ↗
4. Evaluation of molecular interaction between organic molecules Physisorbed on silicon native oxide surface in dry and humid atmosphere10.1149/2.0161503jss ↗
5. Adsorption and desorption rate of multicomponent organic species on silicon wafer surface10.1149/1.1373660 ↗
6. Identification and quantification of FOUP molecular contaminants inducing defects in integrated circuits manufacturing10.1016/j.mee.2012.04.008 ↗
7. Whole air canister sampling coupled with preconcentration GC/MS analysis of part-per-trillion levels of trimethylsilanol in semiconductor cleanroom air10.1021/ac401522p ↗
8. Direct quantitative analysis of phthalate esters as micro-contaminants in cleanroom air and wafer surfaces by auto-thermal desorption-gas chromatography-mass spectrometry10.1016/j.chroma.2005.02.055 ↗
9. Field investigations and dynamic measurements of process activity induced VOCs inside a semiconductor cleanroom10.1016/j.buildenv.2015.08.023 ↗
10. Validation of thermodesorption method for analysis of semi-volatile organic compounds adsorbed on wafer surfaces10.1016/j.talanta.2014.01.029 ↗
11. Monitoring of organic contamination in the ambient air of microelectronic clean room by proton-transfer-reaction/time-of-flight/mass spectrometry (PTR-ToF-MS). Intern10.1016/j.ijms.2015.09.017 ↗
12. Validation of direct analysis real time/time-of-flight mass spectrometry for organophosphate quantitation on wafer surface10.1016/j.talanta.2015.07.080 ↗
13. Applications of Hadamard transform-gas chromatography/mass spectrometry for the detection of hexamethyldisiloxane in a wafer cleanroom10.1016/j.chroma.2011.12.006 ↗
14. Real-time and online screening method for materials emitting volatile organic compounds10.1007/s11051-016-3598-4 ↗
15. Parallel-plate wet denuder coupled ion chromatograph for near-real-time detection of trace acidic gases in clean room air10.2116/analsci.27.805 ↗
16. Analysis of relationship between inorganic gases and fine particles in cleanroom environment10.4209/aaqr.2009.10.0065 ↗
17. Evaluation of hindrance to the growth of SiN passivation layer by contamination of fluoride ions in front opening unified pod (FOUP)10.4209/aaqr.2014.10.0238 ↗
18. Deposition of hydrogen chloride gas on copper wafer depending on humidity and HCl concentration10.1016/j.mee.2019.01.001 ↗
19. Influence of fluoride ions contamination in front opening unified pod (FOUP) generating defective bonding pad10.4209/aaqr.2016.10.0457 ↗
20. Crystalline defect formation on aluminum bond pad during CMOS wafer storage and process strategies for defect elimination10.1116/1.5027149 ↗
21. Identification of a new source of reticle contamination10.1117/12.2247576 ↗
22. Effects of fluorine contamination on spin-on dielectric thickness in semiconductor manufacturing10.1117/12.2297309 ↗
23. A Study of airborne molecular contamination to Cr etching process10.1117/12.2530983 ↗
24. A new method for sampling low-volume AMCs in a front opening unified pod10.1016/j.mee.2016.09.012 ↗
25. Advanced wafer container contamination control methods and strategies in power device manufacturing10.1109/ISSM.2018.8651151 ↗
26. Soft X-ray-assisted detection method for airborne molecular contaminations (AMCs)10.1007/s11051-015-2936-2 ↗
27. Investigation of airborne molecular contamination in cleanroom air environment through portable soft X-ray radiolysis detector.10.3390/app10030978 ↗
28. Novel method to address wafer surface condition10.1109/ASMC.2019.8791754 ↗
29. A study on the defects induced by ambient moisture and ammonia in the perhydropolysilazane spin on glass process10.1109/ASMC.2014.6847029 ↗
30. Humidity induced defect generation and its control during organic bottom anti-reflective coating in the photolithography process of semiconductors10.6109/jicce.2012.10.3.295 ↗
31. Effect of H, O intentionally doping on photoelectric properties in MOVPE-growth GaN layer10.1117/12.2284460 ↗
32. Investigation of the capacitance-voltage electrical characteristics of thin-film transistors caused by hydrogen diffusion under negative bias stress in a moist environment10.1021/acsami.9b11637 ↗
33. Moisture absorption and desorption predictions for plastic ball grid array packages10.1109/95.623021 ↗
34. Evaluating IC-package interface delamination by considering moisture-induced molding-compound swelling10.1109/6144.796546 ↗
35. Moisture ingress, behavior, and prediction inside semiconductor packaging: a review10.1115/1.4035598 ↗
36. Influence of humidity on the performance of composite polymer electrolyte-gated field-effect transistors and circuits10.1109/TED.2019.2903456 ↗
37. Techniques for the measurement of trace moisture in high-purity electronic specialty gases10.1063/1.1597939 ↗
38. Validation, improvement and implementation of sorption mathematical models using a quartz crystal microbalance (QCM)10.1016/j.mee.2015.10.001 ↗
39. Experimental investigations and model study of moisture behaviors in polymeric materials10.1016/j.microrel.2009.03.006 ↗
40. Defects caused by sources other than processing10.1109/ASMC.2019.8791773 ↗
41. IEEE
42. A comparative study of the HF sorption and outgassing ability of different entegris FOUP platforms and materials10.1016/j.mee.2012.12.005 ↗
43. FOUP decontamination solutions to control AMCs in semiconductor fabs: gas purge or wet cleaning?10.1016/j.mee.2018.03.002 ↗
44. Ammonia sorption outgassing and cross contamination ability of entegris FOUPs evaluation and its volatile acids comparisons10.1016/j.mee.2018.11.012 ↗
45. Defectivity and yield impact from the AMC inside the FOUP in advanced technologies10.1109/TSM.2017.2759242 ↗
46. Ultra-pure air for AMC control in nano-processing environment10.1080/02533839.2012.747046 ↗
47. To mitigate airborne molecular contamination through ultra-pure air system10.1016/j.buildenv.2012.08.016 ↗
48. Reduction of moisture and airborne molecular contamination on the purge system of 450 mm front opening unified pod10.1016/j.vacuum.2016.02.003 ↗
49. Reduction of airborne molecular contamination on an extreme ultraviolet reticle dual pod using clean dry air purging technology10.1016/j.mee.2015.10.009 ↗
50. Reticle purging approaches by nitrogen with enhanced efficiency10.4209/aaqr.2009.01.0007 ↗
51. Purging of front-opening unified pod with nitrogen for 300 mm wafer manufacturing10.1143/JJAP.45.5269 ↗
52. Design and evaluation of a nitrogen purge system for the front opening unified pod (FOUP)10.1016/j.applthermaleng.2006.10.028 ↗
53. Purging of foup for 450 mm wafer manufacturing10.1109/ASMC.2013.6552791 ↗
54. Reducing airborne molecular contamination by efficient purging of FOUPs for 300-mm wafers - the influence of materials properties10.1109/66.892628 ↗
55. Purging of front-opening unified pod with nitrogen for 300 mm wafer manufacturing10.1143/JJAP.45.5269 ↗
56. Humidity control for front opening unified pod after opening its door in a mini-environment10.3390/app8071149 ↗
57. Experimental study on the moisture removal of a 450-mm FOUP during the purge or vacuum process10.1016/j.applthermaleng.2016.07.059 ↗
58. Air curtain application in a purged unified pod10.1016/j.applthermaleng.2016.10.022 ↗
59. Moisture prevention in a pre-purged front-opening unified pod (FOUP) during door opening in a mini-environment10.1109/TSM.2018.2791985 ↗
60. Performance of different front-opening unified pod (FOUP) moisture removal techniques with local exhaust ventilation system10.1109/TSM.2020.2977122 ↗