journal article·2026-12

High-performance stretchable photovoltaic materials enabled by alkoxy-containing segments between amide bonds

Jiye Pan, Hongli Wang, Hongming Kou, Zhuang Chen, Deyu Liu

Dyes and Pigments· Volume 255
Publisher page

Abstract

Stretchable organic solar cells (SOSCs) are highly desirable for wearable electronics and electronic skins. However, their development has long been limited by the lack of high-performance stretchable active layer materials. In this work, we successfully designed and synthesized one novel donor polymer D18-O-C3 by introducing alkoxy segments into the backbone of polymer donor D18. Research has shown that compared to alkyl segments, the introduction of alkoxy segments can more effectively disrupt the ordered aggregation of polymers, reduce crystallinity, and significantly improve the stretchability of polymers. At the same time, the introduction of alkoxy segments also increases the Lc, optimizes the charge transport characteristics, and achieves a high PCE of 15.50% for the D18-O-C3: PY-IT based device. This study reveals the crucial role of alkoxy-containing segments in balancing photovoltaic and mechanical properties, providing new molecular design strategies for the development of high-performance stretchable photovoltaic materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Skin electronics from scalable fabrication of an intrinsically stretchable transistor array10.1038/nature25494 ↗
2. Intrinsically stretchable complementary circuits based on direct photo-patternable polymer semiconductors10.1038/s41928-026-01599-z ↗
3. A wireless haptic interface for programmable patterns of touch across large areas of the skin10.1038/s41928-022-00765-3 ↗
4. High-density soft bioelectronic fibres for multimodal sensing and stimulation10.1038/s41586-025-09481-2 ↗
5. A universal interface for plug-and-play assembly of stretchable devices10.1038/s41586-022-05579-z ↗
6. Recent developments of truly stretchable thin film electronic and optoelectronic devices10.1039/C7NR09472H ↗
7. A thiadiazole-based conjugated polymer with ultradeep homo level and strong electroluminescence enables 18.6% efficiency in organic solar cell10.1002/aenm.202101705 ↗
8. Organic solar cells with 21% efficiency enabled by a hybrid interfacial layer with dual-component synergy10.1038/s41563-025-02305-8 ↗
9. High-performance d-a copolymer donor based on difluoroquinoxaline a-unit with alkyl-chlorothiophene substituents for polymer solar cells10.31635/ccschem.022.202202491 ↗
10. Molecular engineering of y-series acceptors for nonfullerene organic solar cells10.1002/sus2.82 ↗
11. Cleaving fused-ring conjugated structure and introducing aggregation-induced emission effect enable over 20% efficiency organic solar cells10.1021/jacs.5c22943 ↗
12. Enhanced charge generation and transport by incorporating a benzotriazole unit for low-cost and high-efficiency organic solar cells10.1021/acsnano.4c12268 ↗
13. Beyond descriptor-based AI design: Sp2 -hybridized branched side chains enable pre-aggregation–driven seeding effects in green-solvent-processed organic solar cells
14. Oxygen-positional 2D side-chain engineering of n-type acceptors for record >90% near-infrared external quantum efficiency in broadband perovskite–organic photodetectors10.1002/adfm.202521677 ↗
15. Nanoscale balance of energy loss and quantum efficiency for high-efficiency polythiophene-based organic solar cells10.1021/acsnano.4c12705 ↗
16. A structurally simple polymer donor enables high-efficiency organic solar cells with minimal energy losses10.1002/anie.202416883 ↗
17. Kers-inspired nanostructured mineral coatings boost ifn-γ mrna therapeutic index for antitumor immunotherapy
18. Flexible-spacer incorporated polymer donors enable superior blend miscibility for high-performance and mechanically-robust polymer solar cells10.1039/D1EE01062J ↗
19. Intrinsically stretchable and non-halogenated solvent processed polymer solar cells enabled by hydrophilic spacer-incorporated polymers
20. Enhancing mechanical durability and long-term stability in organic solar cells via flexible linker-sequential block copolymerized donors10.1002/anie.202420121 ↗
21. Intrinsically stretchable, highly efficient organic solar cells enabled by polymer donors featuring hydrogen-bonding spacers
22. Resolving the efficiency-mechanical trade-off in organic solar cells: 20.4% enabled by hydrogen-bonding engineering10.1002/anie.202524211 ↗
23. Design high-performance stretchable light-harvesting polymers for organic solar cells via synergistic effect of flexible alkyl segment and hydrogen bond10.1002/smll.202412767 ↗
24. Design high-performance stretchable light-harvesting polymers for organic solar cells through tailored amide units with varied alkyl chain lengths10.1021/acs.macromol.5c03260 ↗
25. Strategy for enhancing the dielectric constant of organic semiconductors without sacrificing charge carrier mobility and solubility10.1002/adfm.201402244 ↗
26. 3D conjugated nonflat biphenyl side chains: their exclusive role in inducing negative electrostatic potential in efficient organic solar cells10.1002/smll.202509667 ↗
27. Acceptor-induced reorientation enables vertically and laterally optimized charge-transport devices with a single polymer10.1007/s11426-025-3253-6 ↗
28. Dual-donor organic solar cells with 19.13% efficiency through optimized active layer crystallization behavior10.1016/j.nanoen.2023.109226 ↗
29. Three-in-one strategy enables single-component organic solar cells with record efficiency and high stability10.1002/adma.202312938 ↗
30. Optimizing photovoltaic performance through functional end-capping units of polymer donor materials10.1002/smtd.202501209 ↗
31. Establishing co-continuous network of conjugated polymers and elastomers for high-performance polymer solar cells with extreme stretchability
32. Dispersity-driven stabilization of coexisting morphologies in asymmetric diblock copolymer thin films10.1021/acs.macromol.0c01722 ↗
33. Perovskite-based phototransistors and hybrid photodetectors10.1002/adfm.201903907 ↗
34. Photocurrent enhancement of bodipy-based solution-processed small-molecule solar cells by dimerization via the meso position10.1021/am506585u ↗
35. Design strategy of incorporating flexible chain polymer donors for high-efficiency, large-area flexible organic solar cells with non-halogen solvent processability
36. Influence of alkyl chain branching positions on the hole mobilities of polymer thin-film transistors10.1002/adma.201202689 ↗
37. Molecular understanding of organic solar cells: the challenges10.1021/ar900099h ↗
38. Gixrd study of pm6: Y12 films for stretchable opv applications10.1002/app.57324 ↗
39. Tackling energy loss in organic solar cells via volatile solid additive strategy10.1002/advs.202401330 ↗
40. Correlating crack onset strain and cohesive fracture energy in polymer semiconductor films10.1021/acs.macromol.7b01282 ↗
41. Employing fully asymmetric building block toward high-performance stretchable active layer for organic solar cells10.1002/agt2.70158 ↗
42. Chlorinated polymerized small molecule acceptor enabling ternary all-polymer solar cells with over 16.6% efficiency10.1007/s11426-022-1219-7 ↗
43. Manipulating polymer backbone configuration via halogenated asymmetric end-groups enables over 18% efficiency all-polymer solar cells10.1002/adma.202211296 ↗
44. Suppressing nongeminate recombination with two well-compatible polymer donors enables 16.6% efficiency all-polymer solar cells10.1016/j.cej.2023.144186 ↗
45. Optimized bicontinuous interpenetrating network morphology formed by gradual chlorination to boost photovoltaic performance10.1016/j.cej.2022.135198 ↗
46. High efficiency polymer solar cells with efficient hole transfer at zero highest occupied molecular orbital offset between methylated polymer donor and brominated acceptor10.1021/jacs.9b09939 ↗
47. Effect of alkylthio side chain isomerization of nonfused electron acceptors for organic solar cells10.1016/j.dyepig.2023.111563 ↗
48. Photovoltaics based on hybridization of effective dye-sensitized titanium oxide and hole-conductive polymer p3ht10.1002/adfm.200900283 ↗
49. Enhancing photovoltaic performance by tuning the domain sizes of a small-molecule acceptor by side-chain-engineered polymer donors10.1039/C8TA11059J ↗
50. All-polymer solar cells with 19% efficiency via introducing pincer-shaped non-covalent bond interactions10.1039/D4EE01117A ↗
51. Polymer-like tetramer acceptor enables stable and 19.75% efficiency binary organic solar cells10.1038/s41467-025-57118-9 ↗
52. Suppressing trap density and energy loss via skeleton asymmetry strategy enables highly efficient all-small-molecule organic solar cells10.1016/j.cej.2023.145520 ↗
53. Quantitative determination of organic semiconductor microstructure from the molecular to device scale10.1021/cr3001109 ↗
54. From stretch to fracture: unraveling and quantifying the mechanical limits of conjugated polymer films for stretchable electronics