journal article·2023-06

High-capacity anode materials for lithium-ion batteries: perovskite strontium vanadate with crystalline-amorphous dual-phase structure

X. Li, Z. Lin, N. Jin, L. Sun, X. Yang, Y. Liu

Publisher page

Abstract

Breaking the capacity barrier in intercalation-type anode materials for lithium-ion batteries while preserving other essential electrochemical properties remains a significant challenge. Here, using perovskite SrVO3 as a model, we demonstrate the feasibility of employing defect engineering to provide extra active sites for electrochemical reactions. Defective SrxVO3-δ samples with a unique amorphous-crystalline dual-phase structure are successfully prepared by regulating the nonstoichiometric Sr/V ratio and using a non-equilibrium solution combustion strategy to alleviate nucleation. The dual-phase SrxVO3-δ electrodes, which take advantage of both the high defect concentration advantage of amorphous and the high electrical/ionic conductivity of crystalline, give a high specific capacity of 508 mAh/g at a safe potential of 1.0 V vs. Li/Li+, showing a 40% increase over SrVO3 electrodes and outperforming most state-of-the-art intercalation-based anodes. In addition, when coupling with LiFePO4 cathode, the SrxVO3-δ electrodes can operate over 10,000 cycles with 91% capacity retention, overcoming the limited structural stability exhibited in typical defective electrodes. The study demonstrates the viability of modulating the crystallinity in intercalation-based anodes to enhance electrochemical performance and paves the way for the advancement of Li-ion battery technology.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
2. Materials for lithium-ion battery safety, Science Advances
3. Modeling dendrite growth during lithium electrodeposition at sub-ambient temperature10.1016/j.jpowsour.2013.07.056 ↗
4. Niobium tungsten oxides for high-rate lithium-ion energy storage10.1038/s41586-018-0347-0 ↗
5. Sun · Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage, Science · 2017 · 356 · 599
6. A disordered rock salt anode for fast-charging lithium-ion batteries10.1038/s41586-020-2637-6 ↗
7. H. Li, X. Liu, T. Zhai, D. Li, H. Zhou, Li3VO4: A Promising Insertion Anode Material for Lithium-Ion Batteries, Adv. Energy Mater. 3 (2013) 428–432, doi:10.1002/aenm.201200833.10.1002/aenm.201200833 ↗
8. Liang · Conductive Li3.08Cr0.02Si0.09V0.9O4 Anode Material: Novel “Zero-Strain” Characteristic and Superior Electrochemical Li+ Storage, Adv. Energy Mater. · 2020 · 10
9. Perovskite-type SrVO3 as high-performance anode materials for lithium-ion batteries
10. Amorphous anion-rich titanium polysulfides for aluminum-ion batteries10.1126/sciadv.abg6314 ↗
11. Boosting the lithium-ion storage performance of perovskite SrxVO3−δ via Sr cation and O anion deficient engineering10.1016/j.scib.2022.11.006 ↗
12. On structure and properties of amorphous materials10.3390/ma4091564 ↗
13. Recent progress in some amorphous materials for supercapacitors
14. Mechanisms for lithium insertion in carbonaceous materials10.1126/science.270.5236.590 ↗
15. Electrochemical Na insertion and solid electrolyte interphase for hard-carbon electrodes and application to Na-Ion batteries10.1002/adfm.201100854 ↗
16. From crystalline to amorphous: an effective avenue to engineer high-performance electrode materials for sodium-Ion batteries10.1002/admi.201800639 ↗
17. Amorphous vanadium titanates as a negative electrode for lithium-ion batteries10.33961/JECST.2016.7.4.306 ↗
18. Defect-selectivity and “order-in-disorder” engineering in carbon for durable and fast potassium storage10.1002/adma.202108621 ↗
19. Optical and electrical properties of the transparent conductor SrVO3 without long-range crystalline order10.1063/1.5016245 ↗
20. VESTA3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
21. B. Toby, EXPGUI, a graphical user interface for GSAS, J. Appl. Crystallogr. 34 (2001) 210–213, doi:10.1107/S0021889801002242.10.1107/S0021889801002242 ↗
22. B. Ravel, M. Newville, ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT, J. Synchrotr. Radiat. 12 (2005) 537–541, doi:10.1107/S0909049505012719.10.1107/S0909049505012719 ↗
23. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗
24. Inoue · Bandwidth control in a perovskite-type 3d1-correlated metal Ca1−xSrxVO3, Phys. Rev. B · 1998 · 58 · 4372
25. A review of Raman spectroscopy of vanadium oxides10.1002/jrs.5616 ↗
26. XPS studies of V2O5, V6O13, VO2 and V2O310.1016/0368-2048(94)02291-7 ↗
27. Stoichiometric vanadium oxides studied by XPS10.1002/sia.3844 ↗
28. Vanadium oxide surface studies10.1016/j.progsurf.2003.09.001 ↗
29. Asymmetric response of electrical conductivity and V valence state to strain in cation-deficient Sr1–yVO3 ultrathin films based on absorption measurements at the V L2- and L3- edges10.1107/S1600577519007094 ↗
30. Investigation of the vanadium L23-edge x-ray absorption spectrum of SrVO3 using configuration interaction calculations: Multiplet, valence, and crystal-field effects10.1103/PhysRevB.97.245138 ↗
31. Mesoporous Li3VO4/C submicron-ellipsoids supported on reduced graphene oxide as practical anode for high-power lithium-ion batteries10.1002/advs.201500284 ↗
32. An intercalation pseudocapacitance-driven perovskite NaNbO3 anode with superior kinetics and stability for advanced lithium-based dual-ion batteries10.1039/C9TA09233A ↗
33. Nanoscale LiFePO4 and Li4Ti5O12 for high rate Li-ion batteries10.1149/1.3223987 ↗
34. Template free and binderless NiO nanowire foam for Li-ion battery anodes with long cycle life and ultrahigh rate capability
35. Controlled synthesis of micro/nanostructured CuO anodes for lithium-ion batteries10.1016/j.nanoen.2014.08.009 ↗
36. Higher than 90% initial coulombic efficiency with staghorn-coral-like 3D porous LiFeO2−x as anode materials for Li-ion batteries
37. Design of red phosphorus nanostructured electrode for fast-charging lithium-ion batteries with high energy density10.1016/j.joule.2019.01.017 ↗
38. High-capacity molecular scale conversion anode enabled by hybridizing cluster-type framework of high loading with amino-functionalized graphene10.1021/acsnano.6b01321 ↗
39. Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries10.1021/acs.chemrev.9b00618 ↗
40. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes10.1149/2.0321602jes ↗
41. M. Singh, J. Kaiser, H. Hahn, Thick electrodes for high energy lithium ion batteries, J. Electrochem. Soc. 162 (2015) A1196–A1201, doi:10.1149/2.0401507jes.10.1149/2.0401507jes ↗
42. Multiscale understanding and architecture design of high energy/power lithium-ion battery electrodes10.1002/aenm.202000808 ↗
43. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
44. Review—SEI: past, present and future10.1149/2.1441707jes ↗
45. Quantifying inactive lithium in lithium metal batteries10.1038/s41586-019-1481-z ↗
46. Rejuvenating dead lithium supply in lithium metal anodes by iodine redox10.1038/s41560-021-00789-7 ↗
47. Electrochemically induced crystalline-to-amorphous transition of dinuclear polyoxovanadate for high-rate lithium-ion batteries