journal article·2021-12

New benzodithiophene fused electron acceptors for benzodithiophene-based polymer

Cheng Sun, Sanseong Lee, Myeong-Jong Kim, Jaeyoung Kim, Juhui Oh, Byoungwook Park, Hyung Jin Cheon, Jong Min Ryu, Hongkyu Kang, Soo-Young Jang, Kihyun Kim, Kwanghee Lee, Yun-Hi Kim

Dyes and Pigments· Volume 196
Publisher page

Abstract

Abstract We designed and synthesised two fused electron acceptors based on 6,6,12,12-tetrakis (3-hexylphenyl)-indacenobis (benzodithiophene) with two-dimensional alkylthiophene or alkylthiothiophene substituents, named ETBDTIC and ESTBDTIC, respectively. ESTBDTIC exhibited red-shift absorption and deeper the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) levels compared with ETBDTIC. The ESTBDTIC based device exhibited slightly lower open-circuit voltage (Voc) because of its deeper LUMO level that originated from the electron-withdrawing thioalkyl group, while short-circuit current density (Jsc) and fill factor (FF) of ESTBDTIC were much higher than the Jsc and FF of ETBDTIC. The ETBDTIC -based device displayed power conversion efficiency (PCE) of 5.11% with a Voc of 0.96 V, Jsc of 11.24 mA/cm2, and FF of 47.30%; the corresponding values of ESTBDTIC -based device were 7.78%, 0.92 V, 13.92 mA/cm2, and 60.50%. The electronic properties, charge transport, crystallinity, film morphology, and surface energy, and photovoltaic characteristics were studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
2. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
3. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
4. Nonfullerene tandem organic solar cells with high performance of 14.11%
5. Dithieno[3,2-b:2′,3′-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells
6. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte10.1038/nphoton.2015.126 ↗
7. High-performance polymer tandem solar cells employing a new n-type conjugated polymer as an interconnecting layer10.1002/adma.201506270 ↗
8. 10.20% Efficiency polymer solar cells via employing bilaterally hole-cascade diazaphenanthrobisthiadiazole polymer donors and electron-cascade indene-C70 bisadduct acceptor10.1016/j.nanoen.2016.04.048 ↗
9. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
10. What makes fullerene acceptors special as electron acceptors in organic solar cells and how to replace them10.1002/adma.201203486 ↗
11. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
12. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
13. A solution-processable bipolar diketopyrrolopyrrole molecule used as both electron donor and acceptor for efficient organic solar cells10.1039/C4TA06035K ↗
14. High-efficiency all-small-molecule organic solar cells based on an organic molecule donor with alkylsilyl-thienyl conjugated side chains10.1002/adma.201706361 ↗
15. Highly efficient organic solar cells with improved vertical donor-acceptor compositional gradient via an inverted off-center spinning method10.1002/adma.201504014 ↗
16. Achieving an efficiency exceeding 10% for fullerene-based polymer solar cells employing a thick active layer via tuning molecular weight
17. Achieving over 11% power conversion efficiency in PffBT4T-2OD-based ternary polymer solar cells with enhanced open-circuit-voltage and suppressed charge recombination10.1016/j.nanoen.2017.12.005 ↗
18. Tetrafluoroquinoxaline based polymers for non-fullerene polymer solar cells with efficiency over 9%10.1016/j.nanoen.2016.10.008 ↗
19. A 9,9′-spirobi[9H-fluorene]-cored perylenediimide derivative and its application in organic solar cells as a non-fullerene acceptor10.1039/C5CC08484A ↗
20. Molecular electron acceptors for efficient fullerene-free organic solar cells10.1039/C6CP07465K ↗
21. New wide band gap donor for efficient fullerene-free all-small-molecule organic solar cells10.1021/jacs.6b11612 ↗
22. Molecular ordering and performance of ternary nonfullerene organic solar cells via bar-coating in air with an efficiency over 13%10.1021/acsami.9b14464 ↗
23. Non-fullerene acceptor engineering with three-dimensional thiophene/selenophene-annulated perylene diimides for high performance polymer solar cells10.1039/C8TC04926B ↗
24. Highly fluorescent anthracene derivative as a non-fullerene acceptor in OSCs with small non-radiative energy loss of 0.22 eV and high PCEs of over 13%10.1039/C9TA02332A ↗
25. Achieving thickness-insensitive morphology of the photoactive layer for printable organic photovoltaic cells via side chain engineering in nonfullerene acceptors10.1002/aenm.201900044 ↗
26. Designing efficient non-fullerene acceptors by tailoring extended fused-rings with electron-deficient groups10.1002/aenm.201501063 ↗
27. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells10.1039/C7CS00892A ↗
28. Designing high performance all-small-molecule solar cells with non-fullerene acceptors: comprehensive studies on photoexcitation dynamics and charge separation kinetics10.1039/C7EE02967E ↗
29. Fused nonacyclic electron acceptors with additional alkyl side chains for efficient polymer solar cells10.1016/j.orgel.2019.01.052 ↗
30. Regulating exciton bonding energy and bulk heterojunction morphology in organic solar cells: via methyl-functionalized non-fullerene acceptors10.1039/C9TA00597H ↗
31. Extension of indacenodithiophene backbone conjugation enables efficient asymmetric A-D-A type non-fullerene acceptors10.1039/C8TA07334A ↗
32. A near-infrared non-fullerene electron acceptor for high performance polymer solar cells10.1039/C7EE00844A ↗
33. Extended conjugation length of nonfullerene acceptors with improved planarity via noncovalent interactions for high-performance organic solar cells10.1002/aenm.201801618 ↗
34. Materials chemistry C
35. Enhancing the photovoltaic performance of ladder-type dithienocyclopentacarbazole-based nonfullerene acceptors through fluorination and side-chain engineering10.1021/acs.chemmater.9b02355 ↗
36. Enhancing performance of non-fullerene organic solar cells via side chain engineering of fused-ring electron acceptors10.1016/j.dyepig.2016.12.065 ↗
37. Haptacyclic carbazole-based ladder-type nonfullerene acceptor with side-chain optimization for efficient organic photovoltaics10.1021/acsami.7b12612 ↗
38. Unconjugated side-chain engineering enables small molecular acceptors for highly efficient non-fullerene organic solar cells: insights into the fine-tuning of acceptor properties and micromorphology
39. Enhancing the performance of non-fullerene organic solar cells: via end group engineering of fused-ring electron acceptors10.1039/C8TA05800H ↗
40. Chlorinated thiophene end groups for highly crystalline alkylated non-fullerene acceptors toward efficient organic solar cells10.1021/acs.chemmater.9b00980 ↗
41. Recent development of efficient A-D-A type fused-ring electron acceptors for organic solar10.1016/j.solener.2018.09.008 ↗
42. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
43. Enhancing performance of nonfullerene acceptors via side-chain conjugation strategy
44. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
45. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
46. Ternary organic solar cells based on a wide-bandgap polymer with enhanced power conversion efficiencies10.1038/s41598-019-48306-x ↗
47. Ternary blend polymer solar cells with enhanced power conversion efficiency10.1038/nphoton.2014.172 ↗
48. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
49. Barium: an efficient cathode layer for bulk-heterojunction solar cells10.1038/srep01965 ↗
50. Enhancing indacenodithiophene acceptor crystallinity via substituent manipulation increases organic solar cell efficiency10.1021/acs.chemmater.7b04616 ↗
51. All-small-molecule organic solar cells with over 14% efficiency by optimizing hierarchical morphologies10.1038/s41467-019-13292-1 ↗
52. Selective hole and electron transport in efficient quaternary blend organic solar cells10.1016/j.joule.2020.06.014 ↗
53. Ternary organic solar cells with efficiency >16.5% based on two compatible nonfullerene acceptors10.1002/adma.201905645 ↗
54. Large-area nonfullerene organic solar cell modules fabricated by a temperature-independent printing method10.1021/acsami.0c12190 ↗
55. Effects of solubilizing group modification in fullerene bis-adducts on normal and inverted type polymer solar cells10.1021/cm3010369 ↗
56. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗