Effects of dynamic 3D-volume of side chains in conjugated polymers on nano-scale morphology and solar cell properties
Source abstract
Abstract
Abstract We have synthesized a series of benzo[1,2-b:4,5-b′]-dithiophene (BDT)-co-thieno[3,4-b]thiophene (TT) based polymers with various alkyl side chains and bridging-atom on their TT units and studied the effects of the variation in the effective van der Waals volumes (eVol) of the side chains on the photovoltaic properties of the associated bulk heterojunction (BHJ) solar cells. eVol was found to be correlated with the degree of phase separation in the BHJ film, which affects the area of the polymer-PC71BM interface and the charge mobility. The polymer has a 2-ethylhexyl group that results in a relatively optimal BHJ film morphology, with sufficient polymer-PC71BM interfacial area for efficient charge generation and minimal charge mobility loss upon BHJ film formation. As a result, the solar cell device (2-ethylhexyl polymer) exhibits the highest power conversion efficiency of 8.25% because its short-circuit current density value (16.24 mA/cm2) and fill factor (0.674) are the highest of the synthesized polymers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
2. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
3. McEvoy · 2012
4. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution10.1039/C4EE00446A ↗
5. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules10.1039/C4EE01223B ↗
6. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-c-T/PC71BM10.1002/adma.201400411 ↗
7. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
8. Realizing over 10% efficiency in polymer solar cell by device optimization10.1007/s11426-014-5273-x ↗
9. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
10. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
11. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
12. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
13. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
14. Highly efficient plasmonic organic optoelectronic devices based on a conducting polymer electrode incorporated with silver nanoparticles10.1039/c3ee40190a ↗
15. Importance of the donor: fullerene intermolecular arrangement for high-efficiency organic photovoltaics10.1021/ja502985g ↗
16. Highly efficient organic tandem solar cells: a follow up review10.1039/c3ee40388b ↗
17. High-efficiency polymer solar cells enhanced by solvent treatment10.1002/adma.201204306 ↗
18. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
19. High-performance multiple-donor bulk heterojunction solar cells10.1038/nphoton.2015.9 ↗
20. Indacenodithiophene semiconducting polymers for high-performance, air-stable transistors10.1021/ja1049324 ↗
21. Tetrathienoanthracene-based copolymers for efficient solar cells10.1021/ja1110915 ↗
22. Thiophene-rich fused-aromatic thienopyrazine acceptor for donor–acceptor low band-gap polymers for OTFT and polymer solar cell applications10.1039/c0jm00903b ↗
23. Low band gap polymers design approach based on a mix of aromatic and quinoid structures10.1021/ma401358r ↗
24. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
25. π-Conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
26. PDT-S-T: a new polymer with optimized molecular conformation for controlled aggregation and π–π stacking and its application in efficient photovoltaic devices10.1002/adma.201301174 ↗
27. Synthesis and photovoltaic effect in dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers10.1002/adma.201204238 ↗
28. Tailored donor–acceptor polymers with an A–D1–A–D2 structure: controlling intermolecular interactions to enable enhanced polymer photovoltaic devices10.1021/ja500935d ↗
29. Enhancement of organic photovoltaic efficiency via nanomorphology control using conjugated polymers incorporating fullerene compatible side-chains10.1021/ma502546b ↗
30. Thiophene–thiazolothiazole copolymers: significant impact of side chain composition on backbone orientation and solar cell performances10.1002/adma.201303059 ↗
31. Linear side chains in benzo[1,2-b:4,5-b′]dithiophene–thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
32. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
33. Stille polycondensation for synthesis of functional materials10.1021/cr100320w ↗
34. Donor−acceptor thiolated polyenic chromophores exhibiting large optical nonlinearity and excellent photostability10.1021/cm801097k ↗
35. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
36. Mind the gap!10.1039/C3MH00098B ↗
37. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
38. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
39. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
40. Hierarchical nanomorphologies promote exciton dissociation in polymer/fullerene bulk heterojunction solar cells10.1021/nl201715q ↗
41. The effect of polymer solubilizing side-chains on solar cell stability10.1039/C5CP01158B ↗
42. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene): fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
43. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗