Thermo-optic response of MEH-PPV films incorporated to monolithic Fabry-Perot microresonators
Source abstract
Abstract
Abstract Poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) is a semiconducting optically active polymer widely used in optoelectronics research. MEH-PPV can be commercially acquired in a large range of molecular weights. However, the influence of this property on the optical performance of the polymer is often disregarded. In this paper, the thermal dependence of the refractive index of MEH-PPV thin films prepared from high and medium molecular weight polymers is investigated. Thus, monolithic Fabry-Perot (FP) microcavities are fabricated, in which the active polymer film is part of their defect layer. It is found that when these devices are used as optical temperature sensors, the position of the emission band of the microcavities excited with a blue diode laser shifts to lower wavelengths when temperature increases with sensitivities in the 0.2–0.3 nm/°C range. This effect is ascribed to the variation in the refractive index of the polymer active layer within the resonator with temperature. According to theoretical simulations of optical transmittance by classical transfer-matrix method and the evaluation of the optical eigenmodes by finite element methods of the manufactured FP resonator cavities, it is found that the MEH-PPV films present negative thermo-optic coefficients of about −0.018 K−1 and −0.0022 K−1 for high and medium molecular weight polymers, respectively, in the temperature range between 20 and 60 °C. These values are about the highest reported so far, to the best of our knowledge, and points to high performance thermal sensor applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photonic and Optical Devices · Molecular Junctions and Nanostructures · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Light-emitting diodes based on conjugated polymers10.1038/347539a0 ↗
2. Recent advances in conjugated polymers for light emitting devices10.3390/ijms12032036 ↗
3. White light emission transparent polymer nanocomposites with novel poly(p-phenylene vinylene) derivatives and surface functionalized CdSe/ZnS NCs10.1016/j.dyepig.2013.04.038 ↗
4. Conjugated polymers for organic solar cells
5. Organic semiconductor lasers10.1021/cr050152i ↗
6. Optical characterization and properties of polymeric materials for optoelectronic and photonic applications
7. The role of chemical design in the performance of organic semiconductors10.1038/s41570-019-0152-9 ↗
8. Realizing the full potential of conjugated polymers: innovation in polymer synthesis10.1039/C5MH00164A ↗
9. Synthesis, electrical, and optical properties of conjugated polymers
10. On the optical anisotropy of conjugated polymer thin films10.1103/PhysRevB.72.045209 ↗
11. Molecular weight dependence of chain orientation and optical constants of thin films of the conjugated polymer MEH-PPV10.1021/ma0611164 ↗
12. Molecular weight dependence of birefringence of thin films of the conjugated polymer poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1, 4-phenylenevinylene]10.1063/1.1739513 ↗
13. Refractive index and thermo-optic coefficient of composite polymers at 1.55 μm
14. Temperature tuning of a semiconducting-polymer DFB laser
15. Semiconducting (conjugated) polymers as materials for solid-state lasers10.1002/1521-4095(200011)12:22<1655::AID-ADMA1655>3.0.CO;2-2 ↗
16. Conjugated polymers as molecular materials: how chain conformation and film morphology influence energy transfer and interchain interactions10.1146/annurev.physchem.54.011002.103811 ↗
17. Hole mobility enhancement of MEH-PPV film by heat treatment at T g10.1063/1.4939135 ↗
18. Holmium doped fiber thermal sensing based on an optofluidic Fabry-Perot microresonator10.1016/j.jlumin.2018.10.103 ↗
19. Luminescence whispering gallery modes in Ho3+ doped microresonator glasses for temperature sensing10.1016/j.jallcom.2018.10.297 ↗
20. Portable IR dye laser optofluidic microresonator as a temperature and chemical sensor10.1364/OE.24.014383 ↗
21. Tunable silicon microring resonator with wide free spectral range10.1063/1.2337162 ↗
22. Fabrication of high-Q polydimethylsiloxane optical microspheres for thermal sensing10.1063/1.3152791 ↗
23. A portable luminescent thermometer based on green up-conversion emission of Er3+/Yb3+ co-doped tellurite glass10.1038/srep41596 ↗
24. Fibre tip sensors for localised temperature sensing based on rare earth-doped glass coatings10.3390/s141121693 ↗
25. Fluorescence intensity ratio technique for optical fiber point temperature sensing10.1063/1.1606526 ↗
26. Overview of fiber optic sensor technologies for strain/temperature sensing applications in composite materials10.3390/s16010099 ↗
27. Characterization of thermo-optic coefficient and material loss of high refractive index silica sol-gel films in the visible and near-IR10.1364/OME.2.000671 ↗
28. Thermo-optic coefficients of polymers for optical waveguide applications10.1016/j.polymer.2006.05.035 ↗
29. Prediction and phase segregation in thin-film of conjugated polymer blends10.1002/polb.20430 ↗
30. Whispering gallery mode sensors10.1364/AOP.7.000168 ↗
31. Multifunctional optical sensors for nanomanometry and nanothermometry: high-pressure and high-temperature upconversion luminescence of lanthanide-doped phosphates—LaPO 4/YPO 4 :Yb 3+ –Tm 3+10.1021/acsami.8b02853 ↗