journal article·2022-04

A PDTPQx:PC61BM blend with pronounced charge-transfer absorption for organic resonant cavity photodetectors – direct arylation polymerization vs. Stille polycondensation

Tom Vandermeeren, Quan Liu, Sam Gielen, Dries Theunissen, Siebe Frederix, Melissa Van Landeghem, Zhen Liu, Niko Van den Brande, Jan D'Haen, Jochen Vanderspikken, Laurence Lutsen, Koen Vandewal, Wouter Maes

Dyes and Pigments· Volume 200
Publisher page

Abstract

Because of their intriguing properties for optoelectronic applications, research on organic semiconducting polymers has steadily progressed over the past decades, yielding increasingly fine-tuned (hetero)aromatic polymer backbones. In this work, the push-pull copolymer PDTPQx is synthesized, both via Stille polycondensation and direct arylation polymerization (DArP), permitting comparison of the two procedures. Near-infrared organic photodetectors (OPDs) are constructed based on these different polymer batches in combination with PC61BM, and their performance was investigated. From the current-voltage characteristics, it is clear that the DArP polymer-based devices outperform those prepared from the Stille polymers, both in terms of dark current density and external quantum efficiency (EQE), and therefore in terms of specific detectivity as well. The relatively high highest occupied molecular orbital energy level of PDTPQx, in combination with the clear charge-transfer absorption band observed for the DArP-based device, is beneficial for application in organic resonant cavity photodetectors. Such OPDs are prepared for the DArP PDTPQx:PC61BM (1:4) blends with 180 and 210 nm thick bulk heterojunction active layers. EQEs of 2.5% at 1016 nm and 1% at 1140 nm are achieved, with full-width-at-half-maximum peak responses of 44 and 45 nm, respectively, and detectivities of 2.24 × 1010 and 1.06 × 1010 Jones.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Organic optoelectronic materials: mechanisms and applications10.1021/acs.chemrev.6b00127 ↗
2. The development of conjugated polymers as the cornerstone of organic electronics10.1016/j.polymer.2020.122874 ↗
3. Organic photovoltaics: relating chemical structure, local morphology, and electronic properties10.1016/j.trechm.2020.03.006 ↗
4. Organic light emitting diode devices: an energy efficient solid state lighting for applications10.1016/j.rser.2020.110043 ↗
5. Recent progress in organic photodetectors and their applications10.1002/advs.202002418 ↗
6. Wavelength-selective organic photodetectors10.1002/adfm.202104060 ↗
7. Donor–acceptor-conjugated polymer for high-performance organic field-effect transistors: a progress report10.1002/adfm.201904545 ↗
8. Organic electrochemical transistors10.1038/natrevmats.2017.86 ↗
9. The role of chemical design in the performance of organic semiconductors10.1038/s41570-019-0152-9 ↗
10. Stille polycondensation for synthesis of functional materials10.1021/cr100320w ↗
11. Suzuki Polycondensation: polyarylenes à la Carte10.1002/marc.200900063 ↗
12. Advances in molecular design and synthesis of regioregular polythiophenes10.1021/ar800130s ↗
13. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
14. Aryl−Aryl bond formation by transition-metal-catalyzed direct arylation10.1021/cr0509760 ↗
15. Direct arylation polymerization: a guide to optimal conditions for effective conjugated polymers10.1016/j.progpolymsci.2018.06.002 ↗
16. Biodegradation of bio-sourced and synthetic organic electronic materials towards green organic electronics10.1038/s41467-021-23227-4 ↗
17. Design of biodegradable and biocompatible conjugated polymers for bioelectronics10.1039/D1TC03600A ↗
18. Low-defect, high molecular weight indacenodithiophene (IDT) polymers via a C–H activation: evaluation of a simpler and greener approach to organic electronic materials10.1021/acsmaterialslett.1c00478 ↗
19. Conjugated polymers – problems and promises10.1016/j.progpolymsci.2019.101179 ↗
20. On the “true” structure of push–pull-type low-bandgap polymers for organic electronics10.1002/aelm.201700481 ↗
21. Molar mass versus polymer solar cell performance: highlighting the role of homocouplings10.1021/acs.chemmater.5b00939 ↗
22. Organic narrowband near-infrared photodetectors based on intermolecular charge-transfer absorption10.1038/ncomms15421 ↗
23. Polymer:Fullerene bimolecular crystals for near-infrared spectroscopic photodetectors10.1002/adma.201702184 ↗
24. Manipulating the charge transfer absorption for narrowband light detection in the near-infrared10.1021/acs.chemmater.9b02700 ↗
25. Tuning electronic and morphological properties for high-performance wavelength-selective organic near-infrared cavity photodetectors
26. Dithieno[3,2-b:2′,3′-d]pyrrole-based materials: synthesis and application to organic electronics10.1016/j.progpolymsci.2013.04.004 ↗
27. Conjugated materials containing dithieno[3,2-b:2′,3′-d]pyrrole and its derivatives for organic and hybrid solar cell applications10.1039/C8TA09383K ↗
28. Enhanced open-circuit voltage in polymer solar cells by dithieno[3,2-b:2′,3′-d]pyrrole N-acylation10.1039/C4TA00525B ↗
29. N-acyl-dithieno[3,2-b:2’,3’-d]pyrrole-based low bandgap copolymers affording improved open-circuit voltages and efficiencies in polymer solar cells10.1016/j.solmat.2014.12.037 ↗
30. Diamond surface functionalization: from gemstone to photoelectrochemical applications10.1039/C9TC03381E ↗
31. Recent development of quinoxaline based polymers/small molecules for organic photovoltaics10.1002/aenm.201700575 ↗
32. Introducing fluorine and sulfur atoms into quinoxaline-based p-type polymers to gradually improve the performance of fullerene-free organic solar cells10.1021/acsmacrolett.9b00368 ↗
33. Side chain engineering of quinoxaline-based small molecular nonfullerene acceptors for high-performance poly(3-hexylthiophene)-based organic solar cells10.1007/s11426-019-9618-7 ↗
34. Dithieno[3,2-b:2′,3′-d]pyrrole–alkylthiophene–benzo[c][1,2,5]thiadiazole-based highly stable and low band gap polymers for polymer light-emitting diodes10.1002/pola.23694 ↗
35. Quinoxaline derivatives with broadened absorption patterns10.1039/c3ob41059e ↗
36. Donor–acceptor polymers containing 4,8-Dithienylbenzo[1,2-b:4,5-b′]dithiophene via highly selective direct arylation polymerization10.1021/acsapm.0c01163 ↗
37. Higher molecular weight leads to improved photoresponsivity, charge transport and interfacial ordering in a narrow bandgap semiconducting polymer10.1002/adfm.201001271 ↗
38. Effect of molecular weight on morphology and photovoltaic properties in P3HT:PCBM solar cells10.1016/j.orgel.2015.02.017 ↗
39. Narrow electroluminescence linewidths for reduced non-radiative recombination in organic photovoltaics and near-infrared light-emitting diodes10.1016/j.joule.2021.06.010 ↗
40. Near-infrared organic photodetectors based on bay-annulated indigo showing broadband absorption and high detectivities up to 1.1 μm10.1039/C8TC04164D ↗
41. Resonant cavity enhanced photonic devices10.1063/1.360322 ↗
42. Inverse optical cavity design for ultrabroadband light absorption beyond the conventional limit in low-bandgap nonfullerene acceptor–based solar cells10.1002/aenm.201900463 ↗