Asymmetric indenothienothiophene-based unfused core for A-D-A type nonfullerene acceptors
Source abstract
Abstract
Abstract In this work, we design and synthesize three asymmetric acceptor-donor-acceptor (A-D-A) type nonfullerene acceptors (ITOTC, ITUTC and ITUIC) using a novel indenothienothiophene-based unfused core together with two different electron-deficient terminal units (2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile for ITOTC and ITUTC, and 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile for ITUIC). Alkyl chains with different lengths are incorporated in the indenothienothiophene-based unfused core to ensure the good solubility of the resulting nonfullerene acceptors (n-octyl for ITOTC, n-undecyl for ITUTC and ITUIC), and to tune their charge transporting properties as well. Photovoltaic properties of these nonfullerene acceptors are investigated by using a typical wide band-gap polymer of PBDB-T as the donor material. The best-performance polymer solar cell based on ITOTC: PBDB-T with annealing shows a power conversion efficiency (PCE) of 8.35%, in comparison with the counterpart based on ITUTC:PBDB-T which shows a PCE of 7.68%. However, 7.68% PCE is higher than that of the best-performance PSC based on ITUIC:PBDB-T (6.45% PCE). These results suggest that both side-chains and electron-deficient terminal groups can be optimized to improve the photovoltaic properties of A-D-A type nonfullerene acceptors based on the indenothienothiophene-based unfused core.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Polymer photovoltaic cells - enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
3. Over 14% Efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
4. Donor-acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells10.1039/C4CS00250D ↗
5. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
6. Recent advances in wide bandgap semiconducting polymers for polymer solar cells10.1039/C6TA09325F ↗
7. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
8. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
9. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
10. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
11. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
12. Terthiophene-based D-A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells10.1021/jacs.5b08556 ↗
13. Asymmetric-indenothiophene-based copolymers for bulk heterojunction solar cells with 9.14% efficiency10.1002/adma.201505957 ↗
14. Fused-ring acceptors with asymmetric side chains for high-performance thick-film organic solar cells10.1002/adma.201703527 ↗
15. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
16. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
17. Enhancing the photovoltaic performance of nonfullerene acceptors via conjugated rotatable end groups10.1002/aenm.201802131 ↗
18. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
19. Synthesis and photovoltaic properties of low bandgap dimeric perylene diimide based non-fullerene acceptors10.1007/s11426-015-5485-8 ↗
20. Asymmetrical vs symmetrical selenophene-annulated fused perylenediimide acceptors for efficient non-fullerene polymer solar cells10.1021/acsaem.8b01484 ↗
21. Aromatic-diimide-based n-type conjugated polymers for all-polymer solar cell applications10.1002/adma.201804699 ↗
22. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
23. Asymmetrical ladder-type donor-induced polar small molecule acceptor to promote fill factors approaching 77% for high-performance nonfullerene polymer solar cells10.1002/adma.201800052 ↗
24. Nonfullerene acceptors with enhanced solubility and ordered packing for high-efficiency polymer solar cells10.1021/acsenergylett.8b00928 ↗
25. Dithieno[3,2-b:2',3'-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
26. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
27. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
28. A new nonfullerene electron acceptor with a ladder type backbone for high-performance organic solar cells10.1002/adma.201604964 ↗
29. Effect of core size on performance of fused-ring electron acceptors10.1021/acs.chemmater.8b02222 ↗
30. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
31. Dithienocyclopentadibenzothiophene: a C2v-symmetric core for nonfullerene acceptors with tunable bandgaps10.1039/C9TA02544H ↗
32. Enhancing the photovoltaic performance of ladder-type dithienocyclopentacarbazole-based nonfullerene acceptors through fluorination and side-chain engineering10.1021/acs.chemmater.9b02355 ↗
33. Subtle molecular tailoring induces significant morphology optimization enabling over 16% efficiency organic solar cells with efficient charge generation10.1002/adma.201906324 ↗
34. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
35. Push-pull type non-fullerene acceptors for polymer solar cells: effect of the donor core10.1021/acsami.7b05417 ↗
36. Asymmetric indenothiophene-based nonfullerene acceptors for binary- and ternary-blend polymer solar cells10.1016/j.dyepig.2019.107555 ↗
37. Optimization and analysis of conjugated polymer side chains for high-performance organic photovoltaic cells10.1002/adfm.201504093 ↗